Page History

Introduction

• This page dedicated to bringing up and validation of Webpa functionality in R-Pi Zero.
• WebPA is the communication channel from Cloud to RDK based home gateway devices. It helps to manage devices from Cloud. WEBPA protocol provides functionality of read/write access to device management parameters.

Required Equipment

• Raspberry Pi 0 Device
• SD Card
• Power Cable
• OTG Cable
• Standard USB keyboard
• Mini HDMI connector
• HDMI Cable
• Television set/monitor with HDMI input

System Setup

Build Procedure

$ repo init -u "https://code.rdkcentral.com/r/rdkcmf/manifests" -m rdkc-nosrc.xml -b master

...

$ bitbake rdk-generic-camera-image

Image Flash Procedure

$ sudo dd if="Image Name" of="Device Name" bs=4M

...

sudo dd if=rdk-generic-camera-image_default_20200130060729.rootfs.rpi-sdimg of=/dev/sdb bs=4M

WEBPA Validation Procedure

STEP 1:

Add require SSID and PSK in /etc/wpa_supplicant.conf file in below format

...

ps -Af | grep webpacamera

STEP 6:

Parameter fetching from client( RPI ) device

Fetch device or feature parameter detail from client( RPI ) device through parodus by using webpa server.

...