Versions Compared

Old Version 3

changes.mady.by.user Keerthana Pandurangan

Saved on

compared with

New Version Current

changes.mady.by.user Chandrakanth Pokuru

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

childrentoc
Table of Contents
maxLevel
5

Introduction

This manual describes the rdk-generic-broadband-image build procedure for Yocto 3.1 builds. This will upgrade the default build system used in RDKB, from morty(2.2) to dunfell(3.1). In addition to upgrades to opensource packages, Yocto 3.1 also contain Long term Support release feature. The current version lacks the variety of features available in the dunfelldu';po-0=nfell. The upgraded build tools will be used to generate rdk-generic-broadband-image for Raspberrypi reference platform. 

...

Code Block
languagebash
themeRDark
$ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
  build-essential chrpath socat cpio python python3 python3-pip python3-pexpect \
  xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev \
  pylint3 xterm bmap-tools

$ sudo apt-get install git cmake autoconf texinfo openjdk-8-jdk openjdk-8-jre \
  m4 libtool libtool-bin curl pkg-config lib32z1 doxygen

Repo Setup

In order to use Yocto build system, the repo tool must be properly installed on the machine.

...

Code Block
themeMidnight
titleFlash command
bzip2 -d <path to ImageName.wic.bz2>
sudo -E bmaptool copy --nobmap <path to ImageName.wic> <path to SD card space>

Example:

$ bzip2 -d rdk-generic-broadband-image-raspberrypi-rdk-broadband.wic.bz2
$ sudo -E bmaptool copy --nobmap rdk-generic-broadband-image-raspberrypi-rdk-broadband.wic.bz2 /dev/sdb

Validated Functionalities

No

Feature

Supported

1LAN Connected Devices-Ethernet(tick)
2WAN Connected Devices-Wi-Fi(tick)
3Parental Control(tick)
4Firewall settings(tick)
5Advanced Config: Port Triggering(error)
6Advanced Config: Port Forwarding(tick)
7Advanced Config: Remote Management(tick)
8Advanced Config: DMZ(tick)
9Xfinity Wi-Fi 2.4/5 GHz – Public Hotspot(tick) (error)
10Test and Diagnostics(tick)
11Local WebUI Configuration(tick)
12Factory Reset(tick)
13DHCP /Reserved IP(tick)
14EthWan(tick)
15Eth Agent(tick)
162.4 GHz Band Support(tick)
175 GHz Band Support(tick)
18Bridge Mode Support(tick)
19Persistent Storage Management(tick)
20WebPA for Comcast,community(tick)
21Lost and Found(error)
22Bluetooth(error)
22Harvester Support(error)
23TR-69(error)
24SNMP(tick)
27Boot time data measurement(error)
28Wireless Protection Setup(WPS - 2G support)(tick)
29Captive Portal(tick)
30Wi-Fi MAC Filtering(error)
31Log Rotation Support(tick)
32Firmware Upgrade Support(tick)
33Multiboot Support(tick)
34Telemetry Support (T2 single profile support)(tick)
35IPV6(error)
     36

Log level control through CcspLogAgent

                (tick)
      37

Band Steering using RSSI

                (tick)   (error)
      38

Backup and Restore

                (error)
      39

SelfHeal

                (tick) 
       40Password-Reset                (tick) 
       41WebUI JST                  (tick)