...
- Boot up your VM by clicking on start
- Click “start” to launch the Emulator vmdk image
- Provide “root” to login Emulator as shown in the screen shot
- Emulator usually fetches IP address by default, if not then assign statically using the commands
- For ex: ifconfig eth0/erouter0 192.168.1.449
- route add default gw 192.168.1.1 eth0/erouter0
- Once IP address for Emulator is up, Emulator shall be accessed in the Host PC using the below command
...
{"serverDuration": 2078, "requestCorrelationId": "d98f2d14e6f800b7"}