RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
1) Create Environment
2) Create Model
3) Create MAC list by entering the MAC address of Rpi board
4) Create the Firmware Configuration by providing Firmware Description, File name as Image name to be downloaded from Xconf server, and version is the same image name without the extension (.rootfs.rpi-sdimg) and select Model(ex. RPI_BB) form the listed Models
5) Create MAC rule by providing rule name, Build condition is eStbMac, choose the option IN_LIST and for next field, select the MAC list created for RPi board, verify that based on the MAC list selection, Firmware Config will be automatically displayed under Action section.
6) Go to Download Location Round Robin Filter page and click on Edit. Provide Location and full http location as mentioned in the snapshot below. Select the option "Never use HTTP". Select the Rogue model from the models displayed in the section (ex. RPI, RPI_BB). Verify that Firmware versions are displayed based on the selected Rogue models.
Provide TFTP Server IP address in the IPv4 locations and provide 100 in the percentage field. If there are multiple TFTP servers then add them under IPv4 locations and distribute the percentage among them like total should be 100% and save this page.
7. Verify that XConf Server configuration displays the Json response from the mentioned URL:
...
For ex. http://34.219.243.214:9092/xconf/swu/stb?eStbMac=B8:27:EB:F6:70:8C
Configure tftp server and keep the image file and reapective md5 checksum file inside tftp folder. Example given below:
...