RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Table of Contents
...
Tip | ||
---|---|---|
| ||
This page is dedicated for switching the images (broadband to video) specifically for techsummit-2019 |
1. Flash the Broadband image in SD card
Code Block | ||||
---|---|---|---|---|
| ||||
sudo dd if=<RPIimage-sdimg> of=</dev/sdc> bs=4M
Example: sudo dd if=rdk-generic-hybrid-refapp-thunder-image_default_20190829072513.rootfs.rpi-sdimg of=/dev/sdc bs=4M |
2. Resizing and partition creation
3. Keep RDK-Video image in the host machine
4. Extracting the RDK-Video image into the extblock directory
Code Block | ||||
---|---|---|---|---|
| ||||
sudo sh extract.sh <video-image file>
For ex. sudo sh extract.sh rdk-generic-hybrid-refapp-thunder-image_default_20190924125426.rootfs.rpi-sdimg |
After executing the above script, Linux kernel and RootFS of RDK-Video image would be present in the extblock directory
5. To Copy the RDK-Video image in Partition-P4
Code Block | ||||
---|---|---|---|---|
| ||||
For ex.
mkdir videomnt
sudo mount /dev/sdb4 videomnt
In above command, storage partition 4 will get mounted to videomnt directory |
Code Block | ||||
---|---|---|---|---|
| ||||
sudo cp -r extblock/v* videomnt/ |
6. Copy the vrootfs backup data into partition 4 storage bank, to ensure it will acts as video bank as well
Code Block | ||||
---|---|---|---|---|
| ||||
sudo cp -r extblock/vrootfs_backup_data/* videomnt/ |
7. Unmount videomnt directory as below
Code Block | ||||
---|---|---|---|---|
| ||||
sudo umount videomnt |
8. Now Boot up the SD card in RPI-> it should come up with BB image in partition (P2)
9. Log into the R-Pi from Host PC execute the below command
ssh root@<RPI-Board IP>
10. To load the video image which is present in the storage execute the script bank_video_switch.sh
Code Block | ||||
---|---|---|---|---|
| ||||
root@RaspberryPi-Gateway:/lib/rdk# sh bank_video_switch.sh |
11. R-Pi should boot up with video image. Ensure that the ethernet connection is available for R-Pi.
NOTE:
Ensure that while mounting the SD card in host machine it may have different device names like /dev/sdc * and /dev/sdd * . Please check host machine accordingly while using device name.