SI NO | Automation ID | Steps | Summary | Release | Contributor | Test Case Type |
---|
1 | TC-RDKB-WIFI-1011 | 6 | Verify default SSID on devices using SNMP | Release 1 | RDKM | 1 DOT0 |
2 | TC-RDKB-WIFI-BAND-STEERING-1001 | 2 | Validate the default value of band steering Capacity using TR181 data object via WEBPA and verify this Parameter is read only | Release 1 | RDKM | 1 DOT0 |
3 | TC-RDKB-WIFI-ATM-1002 | 4 | Validate AirTimeManagement by Assigning Percentages to the Stations added via dmcli. (2.4Ghz) | Release 1 | RDKM | 1 DOT0 |
4 | TC-RDKB-WIFI-1010 | 6 | Verify default SSID using WebPA | Release 1 | RDKM | 1 DOT0 |
5 | TC-RDKB-WIFI-1016 | 11 | Verify telemetry for wifi channel bandwidth for 2.4G | Release 1 | RDKM | 1 DOT0 |
6 | TC-RDKB-WIFI-MESH-1000 | 7 | Verify Mesh Enable does not change the 5ghz channel to DFS range | Release 1 | RDKM | 1 DOT0 |
7 | TC-RDKB-DEF-SSID-5005 | 4 | Cross-verify the Default Private Wi-Fi SSID and password retrieved from WebPA with the configurations from SNMP | Release 2 | RDKM | 1 DOT0 |
8 | TC-RDKB-MESH-WIFI-1001 | 5 | Verify enabling Bridge Mode using WebPA when the MESH is enabled | Release 2 | RDKM | 1 DOT0 |
9 | TC-RDKB-MESH-WIFI-1002 | 5 | Verify enabling Bridge Mode using SNMP when the MESH is enabled | Release 2 | RDKM | 1 DOT0 |
10 | TC-RDKB-WIFI-RESTORE-1001 | 21 | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using webpa command for doing WIFI settings reset | Release 3 | RDKM | 1 DOT0 |
11 | TC-RDKB-MESH-WIFI-1004 | 2 | Verify enabling MESH when the Bridge Mode is enabled. | Release 3 | RDKM | 1 DOT0 |
12 | TC-RDKB-WIFI-2050 | 6 | Verify that Wi-Fi connectivity of 5 GHz frequency SSID is not affected when 2.4 GHz frequency SSID is disabled | Release 4 | RDKM | 1 DOT0 |
13 | TC-RDKB-WIFI-1001 | 18 | verify the status of wifi mesh service on enabling and disabling it | Release 4 | RDKM | 1 DOT0 |
14 | TC-RDKB-WIFI-5051 | 24 | Verify Management Frame Power Controls for 2.4 GHz and 5 GHz Radios using WebPA | Release 4 | RDKM | 1 DOT0 |
15 |
SI NO | Automation ID | Steps | Summary | Release | Contributor |
---|
1 | TC-RDKB-WIFI-1011 | 6 | Verify default SSID on devices using SNMP | Release 1 | RDKM |
2BANDSTEERING-2 | Validate the default value of band steering Capacity using TR181 data object via WEBPA and verify this Parameter is read only | Release 1 | RDKM | 33 | Validate AirTimeManagement by Assigning Values at APGroup Level | Release 4 | RDKM | 1 DOT0 |
16 | TC-RDKB-WIFI- |
ATM-10024 | Validate AirTimeManagement by Assigning Percentages to the Stations added via dmcli. (2.4Ghz) | Release 1 | RDKM | TX-RATE-CONFIG-5064 | 17 | To verfiy high power support in 5GHZ band channel | Release 4 | RDKM | 1 DOT0 |
17 |
410106 | Verify default SSID using WebPA | Release 1 | RDKM | 19 | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using SNMP command for doing WIFI settings reset. | Release 4 | RDKM | 1 DOT0 |
18 | TC-RDKB-WIFI-TX-RATE-CONFIG-5061 | 48 | Verify the configuration of Transmission Control Rate for 2.4 GHz and 5GHz Radio using WebPA | Release 4 | RDKM | 1 DOT0 |
19 | TC-RDKB-WIFI-CON-PERF-1002 | 2 | Find out the average mean time for Wi-Fi connection establishment of 2.4GHz radio band with 20 times | Release 4 | RDKM | 1 DOT0 |
20 | TC-RDKB-WIFI-CON-PERF-1003 | 2 | Find out the average mean time for Wi-Fi connection establishment of 5GHz radio band with 20 times | Release 4 | RDKM | 1 DOT0 |
21 | TC-RDKB-WIFI-4001 | 10 | Ping via IPV4 and IPV6 on 2.4GHz when 5GHz is disabled. | Release 4 | RDKM | 1 DOT0 |
22 | TC-RDKB-WIFI-4002 | 10 | Ping via IPV4 and IPV6 on 5GHz when 2.4GHz is disabled. | Release 4 | RDKM | 1 DOT0 |
23 | TC-RDKB-WIFI-4003 | 12 | Test to verify that LAN side wireless CPE gets an IP address when dual radio bands(2.4GHZ and 5 GHZ) are enabled in CM | Release 4 | RDKM | 1 DOT0 |
24 |
5 | TC-RDKB-WIFI-1016 | 11 | Verify telemetry for wifi channel bandwidth for 2.4G | Release 1 | RDKM |
6 | TC-RDKB-WIFI-MESH-1000 | 7 | Verify Mesh Enable does not change the 5ghz channel to DFS range | Release 1 | RDKM |
7 | TC-RDKB-DEF-SSID-5005 | 4 | Cross-verify the Default Private Wi-Fi SSID and password retrieved from WebPA with the configurations from SNMP | Release 2 | RDKM |
8 | TC-RDKB-MESH-WIFI-1001 | 5 | Verify enabling Bridge Mode using WebPA when the MESH is enabled | Release 2 | RDKM |
9 | TC-RDKB-MESH-WIFI-1002 | 5 | Verify enabling Bridge Mode using SNMP when the MESH is enabled | Release 2 | RDKM |
10 | TC-RDKB-WIFI-RESTORE-1001 | 21 | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using webpa command for doing WIFI settings reset | Release 3 | RDKM |
11 | TC-RDKB-MESH-WIFI-1004 | 2 | Verify enabling MESH when the Bridge Mode is enabled. | Release 3 | RDKM |
1220506 | Verify that Wi-Fi connectivity of 5 GHz frequency SSID is not affected when 2.4 GHz frequency SSID is disabled20 | Enable/Disable both 2.4GHz, and 5Ghz and confirm Client connects/disconnects successfully | Release 4 | RDKM | 1 DOT0 |
13100118 | verify the status of wifi mesh service on enabling and disabling it15 | Verify 2.4 GHz WiFi beacon rate changing behavior | Release 4 | RDKM |
14505124 | Verify Management Frame Power Controls 6 | Enable/Disable Broadcast SSID for 2.4 |
GHz and 5 GHz Radios using WebPAGhz WiFi network and verify disabled status | Release 4 | RDKM |
15ATM-10013 | Validate AirTimeManagement by Assigning Values at APGroup Level6 | Enable/Disable Broadcast SSID for 5 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 1 DOT0 |
16TXRATECONFIG-506417 | To verfiy high power support in 5GHZ band channel3 | Verify Set or Get PhyRate threshold for 2.4GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM | 1 DOT0 |
17RESTORE100219 | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using SNMP command for doing WIFI settings reset.3 | Verify Set or Get PhyRate threshold for 5GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM | 1 DOT0 |
30 | TC-RDKB-WIFI-BAND-STEERING-1011 | 15 | Set IdleInactiveTime and OverlaodInactiveTimne to values and verify cfg -s and lbd.conf is updated | Release 4 | RDKM | 1 DOT0 |
18TX-RATECONFIG506148 | Verify the configuration of Transmission Control Rate for 2.4 GHz and 5GHz Radio using WebPA7 | verify the factory default value of Band steering paarmeters using webpa and dmcli | Release 4 | RDKM |
191 DOT0 |
32 | TC-RDKB-WIFI-CON-PERF- |
10022 average mean time for connection establishment connectivity rate of 2.4GHz radio band with |
20 10 times in Wireless Gateway | Release |
42010032 average mean time for connection establishment connectivity rate of 5GHz radio band with |
20 10 times in Wireless Gateway | Release |
421400110 | Ping via IPV4 and IPV6 on 2.4GHz when 5GHz is disabled. | Release 4 | RDKM | 4 | Test to verify the default number of allowed clients for PublicWiFi Secure and open SSID using WebPA. | Release 5 | RDKM | 1 DOT0 |
35 |
22400210 | Ping via IPV4 and IPV6 on 5GHz when 2.4GHz is disabled. | Release 4 | RDKM | 22 | Validate that SSH, telnet to LAN geteway IP from connected clients is not successful | Release 5 | RDKM | 1 DOT0 |
36 |
23400312 | Test to verify that LAN side wireless CPE gets an IP address when dual radio bands(2.4GHZ and 5 GHZ) are enabled in CM | Release 4 | RDKM | 10 | Verify the reduction in power level of 2.4GHz WiFi Access Point does not impact the non-management frames | Release 5 | RDKM | 1 DOT0 |
37 |
24400420 | Enable/Disable both 2.4GHz, and 5Ghz and confirm Client connects/disconnects successfully | Release 4 | RDKM | 10 | Verify the reduction in power level of 5GHz WiFi Access Point does not impact the non-management frames. | Release 5 | RDKM | 1 DOT0 |
38 |
255001Verify 2.4 GHz WiFi beacon rate changing behavior | Release 4 | RDKM | This test case is to Verify the controlled user access (Allow) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 1 DOT0 |
39 |
2620016 | Enable/Disable Broadcast SSID for 2.4 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 7 | Ability to disable WiFi Radio through WEBPA | Release 5 | RDKM | 1 DOT0 |
40 |
2720026 | Enable/Disable Broadcast SSID for 5 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 14 | This test case is to verify the controlled user access (Allow All) to the Specific Device for 2.4 and 5 GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 1 DOT0 |
41 | TC-RDKB-WIFI-5012 | 15 | Verify the controlled user access (Allow) to the specific Devices for 2.4 GHZ against different MAC addresses by way of MACc ACLs | Release 5 | RDKM | 1 DOT0 |
42 |
28 | TC-RDKB-WIFI-BAND-STEERING-1005 | 3 | Verify Set or Get PhyRate threshold for 2.4GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM |
29BANDSTEERING-10043 | Verify Set or Get PhyRate threshold for 5GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM | 13 | Test to verify WiFi client connect disconnect events | Release 5 | RDKM | 1 DOT0 |
43 |
30BAND-STEERING-101115 | Set IdleInactiveTime and OverlaodInactiveTimne to values and verify cfg -s and lbd.conf is updated | Release 4 | RDKM | 2GHZ-DHCP-IPV4-DSBLE-5001 | 5 | Verify the IP range in 2.4GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | 1 DOT0 |
44 |
31BAND-STEERING-10037 | verify the factory default value of Band steering paarmeters using webpa and dmcli | Release 4 | RDKM | 5GHZ-DHCP-IPV4-DSBLE-5001 | 5 | Verify the IP range in 5GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | 1 DOT0 |
45 |
32CONPERF10005 | Find out the successful Wi-Fi connectivity rate of 2.4GHz radio band with 10 times in Wireless Gateway5001 | 14 | Verify 2.4 GHz SSID is enabled | Release 5 | RDKM |
33CONPERF10015Find out the successful Wi-Fi connectivity rate of 5GHz radio band with 10 times in Wireless GatewayVerify that the passphrase key of WIFI access point can be updated for 5 Ghz | Release 5 | RDKM | 1 DOT0 |
3450204 | Test to verify the default number of allowed clients for PublicWiFi Secure and open SSID using WebPA.16 | Verify Security Mode for WiFi access bands (2.4 and 5 GHz) | Release 5 | RDKM |
35CCNEG22Validate that SSH, telnet to LAN geteway IP from connected clients is not successfulVerify that WIFI radio does not support channel number other than the possible channels defined | Release 5 | RDKM |
361 DOT0 |
49 | TC-RDKB-WIFI-RESERVED- |
505310 reduction in power level of 2.4GHz WiFi Access Point does not impact the non-management framesReserved IP for clients for Ethernet client | Release 5 | RDKM | 1 DOT0 |
37505410 the reduction in power level of 5GHz WiFi Access Point does not impact the non-management frames.that Wi-Fi connectivity of 2.4GHz frequency is not affected when 5GHz frequency Radio is disabled | Release 6 | RDKM | 1 DOT0 |
51 |
Release 5 | RDKM | 38501415 | This test case is to Verify the controlled user access (Allow) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 30 | Verify that when WIFI Radio is disabled in CM, wireless CPE should not get an ip address | Release 6 | RDKM | 1 DOT0 |
52 |
39_RADIO-10027 | Ability to disable WiFi Radio through WEBPA | Release 5 | RDKM | -CHNL-CONFIG-5073 | 18 | Verify Client Connectivity to 5GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | 1 DOT0 |
53 |
40501114 | This test case is to verify the controlled user access (Allow All) to the Specific Device for 2.4 and 5 GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 4 | Test to verify data transmission between 2 connected(LAN-WLAN;WLAN to LAN) clients | Release 6 | RDKM | 1 DOT0 |
54 |
41501215 | Verify the controlled user access (Allow) to the specific Devices for 2.4 GHZ against different MAC addresses by way of MACc ACLs | Release 5 | RDKM | CHNL-CONFIG-5072 | 20 | Verify Client Connectivity to 2.4GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | 1 DOT0 |
55 |
42CLIENT100113 WiFi client connect disconnect eventsWi-Fi Interworking Information Element | Release |
5432GHZDHCPIPV4DSBLE-50015 | Verify the IP range in 2.4GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | 29 | Test case is created as part of Configuration of Wi-Fi Tx Rate for 2.4GHz Radio and 5Ghz Radio | Release 6 | RDKM | 1 DOT0 |
57 |
44WIFI-5GHZ-DHCP-IPV4-DSBLE-50015 | Verify the IP range in 5GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | WIFISSID-2003 | 12 | Test case is to validate the failure authentication attempts | Release 6 | RDKM | 1 DOT0 |
58 |
45KEYPHARSE14 2.4 GHz SSID is enabledthe WIFI Connectivity on Dual Band Radio 802.11n client with security mode open | Release 6 | RDKM | 1 DOT0 |
59 |
Release 5 | RDKM | 46WIFI-KEY-PHARSE-500214 | Verify that the passphrase key of WIFI access point can be updated for 5 Ghz | Release 5 | RDKM | MFPCONFIG-1002 | 4 | Verify power cycle persist the MFPConfig values | Release 7 | RDKM | 1 DOT0 |
60 | TC-RDKB-MFPCONFIG-1003 | 4 | Verify MFPConfig is configurable by Wi-Fi HAL | Release 7 | RDKM | 1 DOT0 |
61 |
47400516 | Verify Security Mode for WiFi access bands (2.4 and 5 GHz) | Release 5 | RDKM | 13 | Test to verify Default values after factory reset and value persistent after reboot | Release 7 | RDKM | 1 DOT0 |
62 |
48POSSIBLE-CHANNELS-4 | Verify that WIFI radio does not support channel number other than the possible channels defined | Release 5 | RDKM | 25 | Verify WiFi GAS TR-181 parameters and their default values | Release 7 | RDKM | 1 DOT0 |
63 |
49 | TC-RDKB-FORCE_DISABLE_WIFI- |
RESERVED-IP-10038 | Verify the Reserved IP for clients for Ethernet client | Release 5 | RDKM | 1002 | 21 | Verify force disable wifi radio functionality in bridge mode | Release 7 | RDKM | 1 DOT0 |
64 |
50RADIO500125 | Verify that Wi-Fi connectivity of 2.4GHz frequency is not affected when 5GHz frequency Radio is disabled | Release 6 | RDKM | 8 | Validate the SSID name and BSSID of the Publicwifi | Release 7 | RDKM | 1 DOT0 |
65 |
51CCIP500130 | Verify that when WIFI Radio is disabled in CM, wireless CPE should not get an ip address | Release 6 | RDKM | 21 | Private WiFi channel selection should remain same post PublicWiFi enabled | Release 7 | RDKM | 1 DOT0 |
66 |
52CHNLCONFIG507318 | Verify Client Connectivity to 5GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | 9 | Verify the Reserved IP for clients for 2.4ghz | Release 7 | RDKM | 1 DOT0 |
67 |
53TRANS10004 | Test to verify data transmission between 2 connected(LAN-WLAN;WLAN to LAN) clients | Release 6 | RDKM | 9 | Verify the Reserved IP for clients for 5ghz | Release 7 | RDKM | 1 DOT0 |
68 |
54CHNLCONFIG507220 Client Connectivity to 2.4GHz bands with Channel Selection Mode is Manualthe WIFI Connectivity on Dual Band Radio for Client for 2.4 and 5 Ghz with security mode open | Release 7 | RDKM | 1 DOT0 |
69 |
Release 6 | RDKM | 55IE10028 | Test to verify Wi-Fi Interworking Information Element | Release 6 | RDKM | 46 | Verify enable one radio & disable another radio and check the internet connectivity | Release 7 | RDKM | 1 DOT0 |
70 |
56TX-RATE-CONFIG-506229 | Test case is created as part of Configuration of Wi-Fi Tx Rate for 2.4GHz Radio and 5Ghz Radio | Release 6 | RDKM | 5015 | 15 | This test case is to Verify the controlled user access (Deny) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM | 1 DOT0 |
71 |
57WIFISSID200312Test validate the failure authentication attemptsVerify the controlled user access (Deny) for 2.4GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM | 1 DOT0 |
72 |
Release 6 | RDKM | 5850012226 | Verify the WIFI Connectivity on Dual Band Radio 2.4 - 802.11n |
client with security mode openRelease 6 | RDKM | 59 | TC-RDKB-MFPCONFIG-1002 | 4 | Verify power cycle persist the MFPConfig values | Release 7 | RDKM |
60 | TC-RDKB-MFPCONFIG-1003 | 4 | Verify MFPConfig is configurable by Wi-Fi HAL, 5-802.11ac with security mode WPA2-PSK ( AES ) | Release 7 | RDKM | 1 DOT0 |
61_BLASTER-100113 | Test to verify Default values after factory reset and value persistent after reboot-CC-WIN-5004 | 12 | Method to verify Logging all occurrences of connections to LNF PSK SSIDs | Release 7 | RDKM |
62_GAS100125 | Verify WiFi GAS TR-181 parameters and their default values46 | Verify the default channel bandwidth and enable & disable the radio for 2.4GHz & 5GHz with connected clients | Release 7 | RDKM |
63FORCE_DISABLE_100221 | Verify force disable wifi radio functionality in bridge mode | Release 7 | RDKM | CC-AUTH-1001 | 20 | Validate notification is not seen for unauthenticated clients | Release 8 | RDKM | 1 DOT0 |
76 |
64-PUBLICCONFIG-10018 | Validate the SSID name and BSSID of the Publicwifi | Release 7 | RDKM | 26 | Verify Connecting Multiple Clients to the Gateway device via Wi-Fi network and check the internet connectivity | Release 8 | RDKM | 1 DOT0 |
77 |
65PUBLIC-AUTOCH-300121Private WiFi channel selection should remain same post PublicWiFi enabled | Release 7 | RDKM | Verify WiFi status after disabling and enabling | Release 8 | RDKM | 1 DOT0 |
78 |
66RESERVEDIP10019 the Reserved IP for clients WG supports Open Security mode for 2. |
4ghz4 &5 GHZ frequency band | Release |
767RESERVEDIP-9 the Reserved IP for clients for 5ghzWiFi status after disabling | Release |
768SECTYOPEN58 | Verify the WIFI Connectivity on Dual Band Radio for Client 22 | Verify WG supports WAP2(AES) Security mode for 2.4 |
and Ghz with security mode openGHZ frequency band with valid & invalid key passpharse | Release |
769WIFICCRADIO-500146 | Verify enable one radio & disable another radio and check the internet connectivity | Release 7 | RDKM | 10 | Test to validate the private 24/5ghz_Verify BSSID remains same after Factory Reset | Release 8 | RDKM | 1 DOT0 |
82 |
70501515 | This test case is to Verify the controlled user access (Deny) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM | 6 | Test to verify that 802.11a should not be able to connect to CM when operating standard is 'b,g,n', 'g,n' mode | Release 9 | RDKM | 1 DOT0 |
83 | TC-RDKB-2GHZ-HOME-NTW-PSWD-1001 | 6 | Verify the password validations when client connected to 2.4GHz | Release 9 | RDKM | 1 DOT0 |
84 | TC-RDKB-5GHZ-HOME-NTW-PSWD-1002 | 6 | Verify the password validations when client connected to 5GHz | Release 9 | RDKM | 1 DOT0 |
85 | TC-RDKB-LAN-HOME-NTW-PSWD-1003 | 6 | Verify the password validations when client connected to LAN | Release 9 | RDKM | 1 DOT0 |
86 |
71 | TC-RDKB-WIFI-5013 | 15 | This test case is to Verify the controlled user access (Deny) for 2.4GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM |
72 | TC-RDKB-WIFI-CONFIG-CC-5002 | 26 | Verify the WIFI Connectivity on Dual Band Radio 2.4 - 802.11n, 5-802.11ac with security mode WPA2-PSK ( AES ) | Release 7 | RDKM |
73 | TC-RDKB-WIFI-CC-WIN-5004 | 12 | Method to verify Logging all occurrences of connections to LNF PSK SSIDs | Release 7 | RDKM |
74CHANNEL500146 default channel bandwidth and enable & disable the radio for 2.4GHz & 5GHz with connected clientsconfiguration of Transmission Control Rate for 5Ghz(a,n,ac) Radio after reboot | Release 10 | RDKM | 1 DOT0 |
87 |
Release 7 | RDKM | 75CCAUTH100120 notification is not seen for unauthenticated clientsthe DHCP configuration Using SNMP | Release |
876501626 | Verify Connecting Multiple Clients to the Gateway device via Wi-Fi network and check the internet connectivity | Release 8 | RDKM | 15 | Prefer Private functionality should be applicable for Public WiFi open and secure hotspot SSIDs | Release 10 | RDKM | 1 DOT0 |
89 |
77RESET1001 17 WiFi status after disabling and enablingthe configuration of Transmission Control Rate for 5Ghz(n) Radio after reboot | Release 10 | RDKM | 1 DOT0 |
90 |
Release 8 | RDKM | 78CCOPEN-500116 | Verify WG supports Open Security mode for 2.4 &5 GHZ frequency band | Release 8 | RDKM | 15 | Connect to the Connected client having 2.4GHZ WiFi Capability | Release 10 | RDKM | 1 DOT0 |
91 |
79RESET100217 status after disablingsettings after Migration to QA Release | Release11 |
Release 880WIFI-CC-WPA2-500122 | Verify WG supports WAP2(AES) Security mode for 2.4 &5 GHZ frequency band with valid & invalid key passpharse | Release 8 | RDKM | HOTSPOT_INVALID-1001 | 20 | Test to verify XPC notification for public hotspot parameters with invalid values using webpa | Release12 | RDKM | 1 DOT0 |
93 |
81BSSIDPERSIST100110Test Verify internet access to |
validate the private 24/5ghz_Verify BSSID remains same after Factory Resetthe part of keyword added to manages sites are accessible in Wi-Fi. | Release 17 | RDKM | 1 DOT0 |
94 |
Release 8 | RDKM | 82WIFICCWIN-50036 | Test to verify that 802.11a should not be able to connect to CM when operating standard is 'b,g,n', 'g,n' mode | Release 9 | RDKM | 8 | Verify Wi-Fi Driver supports an API used by RDKB to set the Wi-Fi Region | Release 17 | RDKM | 1 DOT0 |
95 |
832GHZHOME-NTW-PSWD-1001 the password validations when client connected to 2.4GHzChange in Wi-Fi region is reflected in regulatory region after device reboot. | Release 17 | RDKM | 1 DOT0 |
96 |
Release 9 | RDKM | 845GHZHOME-NTW-PSWD-10026 | Verify the password validations when client connected to 5GHz | Release 9 | RDKM | DEFAULT_ENCRY-2053 | 9 | To Verify 2.4GHz: Default SSID, Protection mode and encryption mode. | Release 17 | Vodafone | 1 DOT0 |
97 |
85LANHOME-NTW-PSWD-10036 | Verify the password validations when client connected to LAN | Release 9 | RDKM | GATEWAYIP-2013 | 3 | To validate if an error message is displayed when gateway address is set to outside of the range. | Release 17 | Vodafone | 1 DOT0 |
98 |
86WIFISCRTY-CHECK-100112 | Validate Selecting open risky mode and cancelling it immediately should not gray out password field Ethernet | Release 9 | RDKM | 87 | HOSTNAME-2019 | 5 | To validate if 2 Wi-Fi LAN connected devices can communicate via host name. | Release 17 | Vodafone | 1 DOT0 |
99 | TC-RDKB- |
WIFISCRTYCHECK-100212 | Validate Selecting open risky mode and cancelling it immediately should not gray out password field Wifi 2.4Ghz client | Release 9 | RDKM | 5 | To verify the device must be able to connect 2.4GHz Wi-Fi and Internet should work. | Release 17 | Vodafone | 1 DOT0 |
100 |
88WIFISCRTYCHECK-100312 | Validate Selecting open risky mode and cancelling it immediately should not gray out password field Wifi 5Ghz client | Release 9 | RDKM | 4 | To verify the Boot Time of the device is less than 5 MIN (300s) | Release 17 | Vodafone | 1 DOT0 |
101 |
89PWDMGMT100115 | Verify the password management for WEBUI user for Admin page | Release 9 | RDKM | 12 | To verify SNMP walk/Get/Set on RDKB MIBs for CM IPv4 and IPv6 | Release 17 | Vodafone | 1 DOT0 |
102 |
90CONDEV500114Verify the details of connected clients can be retrieved from User admin page | Release 9 | RDKM | To verify if the Dut is accessible using CM IPv6 Address. | Release 17 | Vodafone | 1 DOT0 |
103 |
91CHANNELBANDWIDTH100117 | Login to Lan side GUI page of device | Release 9 | RDKM | 2 | The DHCP settings should not allow user to set same DHCP Pool MinAddress and MaxAddress- max CPE as One. | Release 17 | Vodafone | 1 DOT0 |
104 |
92WIFIRADIO300114 | Verify the configuration of Transmission Control Rate for 5Ghz(a,n,ac) Radio after reboot | Release 10 | RDKM | 7 | Wi-Fi MAC Filter - Allow. | Release 17 | Vodafone | 1 DOT0 |
105 |
93WIFIDHCP-SNMP-500112 | Validate the DHCP configuration Using SNMP | Release 10 | RDKM | 94 | PORTFW-2052 | 15 | Verify Wired performance (TCP) test on WAN to LAN side (Smoke). | Release 17 | Vodafone | 1 DOT0 |
106 | 3DOT0-TC-RDKB- |
WIFIPREFERPRIVATE100215 | Prefer Private functionality should be applicable for Public WiFi open and secure hotspot SSIDs | Release 10 | RDKM | 21 | Wi-Fi DFS support in MESH solution | Release 18 | RDKM | 3 DOT0 |
107 |
95-PUBLICCONFIG50028 | Verify public WiFi Configuration Using LAN Admin Login | 9 | Test to verify WiFi power tables | Release 19 |
Release 1096 | PUBLIC-WIFI-CONFIG-50038 | Verify public WiFi Configuration Using LAN Admin Login 5 GHz | Release 10 | RDKM | HARVESTER-1001 | 11 | Compare the time stamp of the Single client uuid in wiFiLog.txt.0 and Received upstream event data in PARODUSLOg.txt.0 | Release 19 | RDKM | 3 DOT0 |
109 |
97WIFIRADIO300214Verify the configuration of Transmission Control Rate for 5Ghz(n) Radio after reboot | Release 10 | RDKM | Test to verify the wireless client connected to 2.4 GHz Private Wi-Fi network is blocked for all days & for particular time period | Release 20 | RDKM | 1 DOT0 |
110 |
98WIFIPREFERPRIVATE-100315 | Connect to the Connected client having 2.4GHZ WiFi Capability | Release 10 | RDKM | 8 | Validate client connectivity with 6GHz, 5GHz High, 5GHz Low bands in OneWifi | Release 20 | RDKM | 1 DOT0 |
111 |
99WIFI-MIGRATION-100151 | Verify WiFi settings after Migration to QA Release | Release11 | RDKM | CC-MODE-CHANGE-5002 | 23 | Verify the internet connectivity and iperf traffic when client mode is set to 'g' for 2.4 GHz and 'a' for 5 GHz. | Release 20 | RDKM | 1 DOT0 |
112 |
100 | TC-RDKB-HOTSPOT_INVALID-1001 | 20 | Test to verify XPC notification for public hotspot parameters with invalid values using webpa | Release12 | RDKM |
101CHANNELBANDWIDTH24 | Test to verify channel bandwidth of 5Ghz wifi ssid from Lan GUI | Release12 | RDKM | 102 | 16 | Verify the connectivity of 5ghz wifi on different configurations. | Release 20 | RDKM | 1 DOT0 |
113 | 3DOT0-TC-RDKB- |
IPV4GATEWAYIP-20133 | To validate if an error message is displayed when gateway address is set to outside of the range. | Release 17 | Vodafone | 18 | Monitor for WIFI_ERROR_WifiDmCliError marker after upgrade and Ccspwifi process is in zombie state. | Release 20 | RDKM | 3 DOT0 |
114 |
103IPV4HOSTNAME20195 | To validate if 2 Wi-Fi LAN connected devices can communicate via host name. | Release 17 | Vodafone | 8 | Validate the 2.4G Utilization with Increased Population of Devices | Release 21 | RDKM | 1 DOT0 |
115 |
104IPV4NETACCESS-20335 | To verify the device must be able to connect 2.4GHz Wi-Fi and Internet should work. | Release 17 | Vodafone | LATENCY-CLIENT-1001 | 6 | Coverage Improvement for Latency in Wifi clients | Release 21 | RDKM | 1 DOT0 |
116 | 3DOT0-TC-RDKB-WIFI_DB-1001 | 6 | Store RDKB Wi-FI DB in encrypted NVRAM | Release 21 | RDKM | 3 DOT0 |
117 |
105 | TC-RDKB-IPV4-BOOTTIME-2039 | 4 | To verify the Boot Time of the device is less than 5 MIN (300s) | Release 17 | Vodafone |
106IPV4CM2043To verify SNMP walk/Get/Set on RDKB MIBs for CM IPv4 and IPv6 | Release 17 | Vodafone | Validate data model and default configuration settings for client activity stats telemetry markers | Release 22 | RDKM | 1 DOT0 |
118 |
107IPV4CM-20453 | To verify if the Dut is accessible using CM IPv6 Address. | Release 17 | Vodafone | ANALYZER-5001 | 7 | Verify WiFi Spectrum Analyzer tab contains fields like Band, channel, MAC, SSID, Signal Level, Mode, Security. | Release 22 | RDKM | 1 DOT0 |
119 |
108IPV4DHCP20542 | The DHCP settings should not allow user to set same DHCP Pool MinAddress and MaxAddress- max CPE as One. | Release 17 | Vodafone | 16 | Test to verify password failure for private SSID | Release 22 | RDKM | 1 DOT0 |
120 |
109IPV4MAC_FILTER20567 | Wi-Fi MAC Filter - Allow. | Release 17 | Vodafone | 9 | Verify Manual channel selection for WiFi frequency band using tr69/webpa | Release 23 | RDKM | 1 DOT0 |
121 |
110IPV4PORTFW2052 Wired performance (TCP) test on WAN to LAN side (Smoke).the RFC support on set & get of Private WiFi password via SNMP and verify the gateway supports to set & get private WiFi password via WebPA regardless of RFC status. | Release 23 | RDKM | 1 DOT0 |
122 |
Release 17 | Vodafone | 111PWR10069 | Test to verify WiFi power tables | Release 19 | 21 | Validate Telemetry Marker for WiFi Channel Utilization | Release 24 | RDKM | 1 DOT0 |
RDKM