SI NO | Automation ID | Steps | Summary | Release | Contributor |
---|
1 | TC-RDKB-WIFI-1011 | 6 | Verify default SSID on devices using SNMP | Release 1 | RDKM |
2 | TC-RDKB-WIFI-BAND-STEERING-1001 | 2 | SI NO | Automation ID | Steps | Summary | Release | Contributor | Test Case Type |
---|
1 | TC-RDKB-WIFI-1011 | 6 | Verify default SSID on devices using SNMP | Release 1 | RDKM | 1 DOT0 |
2 | TC-RDKB-WIFI-BAND-STEERING-1001 | 2 |
Validate the default value of band steering Capacity using TR181 data object via WEBPA and verify this Parameter is read only | Release 1 | RDKM | 1 DOT0 |
3 | TC-RDKB-WIFI-ATM-1002 | 4 | Validate AirTimeManagement by Assigning Percentages to the Stations added via dmcli. (2.4Ghz) | Release 1 | RDKM | 1 DOT0 |
4 | TC-RDKB-WIFI-1010 | 6 | Verify default SSID using WebPA | Release 1 | RDKM | 1 DOT0 |
5 | TC-RDKB-WIFI-1016 | 11 | Verify telemetry for wifi channel bandwidth for 2.4G | Release 1 | RDKM | 1 DOT0 |
6 | TC-RDKB-WIFI-MESH-1000 | 7 | Verify Mesh Enable does not change the 5ghz channel to DFS range | Release 1 | RDKM | 1 DOT0 |
7 | TC-RDKB-DEF-SSID-5005 | 4 | Cross-verify the Default Private Wi-Fi SSID and password retrieved from WebPA with the configurations from SNMP | Release 2 | RDKM | 1 DOT0 |
8 | TC-RDKB-MESH-WIFI-1001 | 5 | Verify enabling Bridge Mode using WebPA when the MESH is enabled | Release 2 | RDKM | 1 DOT0 |
9 | TC-RDKB-MESH-WIFI-1002 | 5 | Verify enabling Bridge Mode using SNMP when the MESH is enabled | Release 2 | RDKM | 1 DOT0 |
10 | TC-RDKB-WIFI-RESTORE-1001 | 21 | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols, |
Radio Status and Radio Channel can be restored to default settings using webpa command for doing WIFI settings resetRadio Status and Radio Channel can be restored to default settings using webpa command for doing WIFI settings reset | Release 3 | RDKM | 1 DOT0 |
11 | TC-RDKB-MESH-WIFI-1004 | 2 | Verify enabling MESH when the Bridge Mode is enabled. | Release 3 | RDKM | 1 DOT0 |
12 | TC-RDKB-WIFI-2050 | 6 | Verify that Wi-Fi connectivity of 5 GHz frequency SSID is not affected when 2.4 GHz frequency SSID is disabled | Release 4 | RDKM | 1 DOT0 |
13 | TC-RDKB-WIFI-1001 | 18 | verify the status of wifi mesh service on enabling and disabling it | Release 4 | RDKM | 1 DOT0 |
14 | TC-RDKB-WIFI-5051 | 24 | Verify Management Frame Power Controls for 2.4 GHz and 5 GHz Radios using WebPA | Release 4 | RDKM | 1 DOT0 |
15 | TC-RDKB-WIFI-ATM-1001 | 3 | Validate AirTimeManagement by Assigning Values at APGroup Level | Release 4 | RDKM | 1 DOT0 |
16 | TC-RDKB-WIFI-TX-RATE-CONFIG-5064 | 17 | To verfiy high power support in 5GHZ band channel | Release 4 | RDKM | 1 DOT0 |
17 | TC-RDKB-WIFI-RESTORE-1002 | 19 | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using SNMP command for doing WIFI settings reset. | Release 4 | RDKM | 1 DOT0 |
18 | TC-RDKB-WIFI-TX-RATE-CONFIG-5061 | 48 | Verify the configuration of Transmission Control Rate for 2.4 GHz and 5GHz Radio using WebPA | Release 4 | RDKM | 1 DOT0 |
19 | TC-RDKB-WIFI-CON-PERF-1002 | 2 | Find out the average mean time for Wi-Fi connection establishment of 2.4GHz radio band with 20 times | Release 4 | RDKM | 1 DOT0 |
20 | TC-RDKB-WIFI-CON-PERF-1003 | 2 | Find out the average mean time for Wi-Fi connection establishment of 5GHz radio band with 20 times | Release 4 | RDKM | 1 DOT0 |
21 |
Release 3 | RDKM | 11 | TC-RDKB-MESH-WIFI-1004 | 2 | Verify enabling MESH when the Bridge Mode is enabled. | Release 3 | RDKM |
1220506 | Verify that Wi-Fi connectivity of 5 GHz frequency SSID is not affected when 2.4 GHz frequency SSID is disabled10 | Ping via IPV4 and IPV6 on 2.4GHz when 5GHz is disabled. | Release 4 | RDKM | 1 DOT0 |
13100118 | verify the status of wifi mesh service on enabling and disabling it10 | Ping via IPV4 and IPV6 on 5GHz when 2.4GHz is disabled. | Release 4 | RDKM | 1 DOT0 |
14505124 | Verify Management Frame Power Controls for 2.4 GHz and 5 GHz Radios using WebPA12 | Test to verify that LAN side wireless CPE gets an IP address when dual radio bands(2.4GHZ and 5 GHZ) are enabled in CM | Release 4 | RDKM | 1 DOT0 |
15ATM-10013 | Validate AirTimeManagement by Assigning Values at APGroup Level20 | Enable/Disable both 2.4GHz, and 5Ghz and confirm Client connects/disconnects successfully | Release 4 | RDKM |
16TX-RATE-CONFIG-506417 | To verfiy high power support in 5GHZ band channel5001 | 15 | Verify 2.4 GHz WiFi beacon rate changing behavior | Release 4 | RDKM |
17RESTORE-100219 | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using SNMP command for doing WIFI settings reset.6 | Enable/Disable Broadcast SSID for 2.4 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 1 DOT0 |
18-TX-RATE-CONFIG-506148 | Verify the configuration of Transmission Control Rate for 2.4 GHz and 5GHz Radio using WebPA-2002 | 6 | Enable/Disable Broadcast SSID for 5 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 1 DOT0 |
28 | TC-RDKB-WIFI-BAND-STEERING-1005 | 3 | Verify Set or Get PhyRate threshold for 2.4GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM |
19CONPERF10022 | Find out the average mean time for Wi-Fi connection establishment of 2.4GHz radio band with 20 times | Release 4 | RDKM | 3 | Verify Set or Get PhyRate threshold for 5GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM | 1 DOT0 |
30 |
20CONPERF10032 | Find out the average mean time for Wi-Fi connection establishment of 5GHz radio band with 20 times15 | Set IdleInactiveTime and OverlaodInactiveTimne to values and verify cfg -s and lbd.conf is updated | Release 4 | RDKM | 1 DOT0 |
21400110 | Ping via IPV4 and IPV6 on 2.4GHz when 5GHz is disabled.7 | verify the factory default value of Band steering paarmeters using webpa and dmcli | Release 4 | RDKM | 1 DOT0 |
22400210 | Ping via IPV4 and IPV6 on 5GHz when 2.4GHz is disabled. | Release 4 | RDKM | CON-PERF-1000 | 5 | Find out the successful Wi-Fi connectivity rate of 2.4GHz radio band with 10 times in Wireless Gateway | Release 5 | RDKM | 1 DOT0 |
33 |
23400312 | Test to verify that LAN side wireless CPE gets an IP address when dual radio bands(2.4GHZ and 5 GHZ) are enabled in CM | Release 4 | RDKM | 5 | Find out the successful Wi-Fi connectivity rate of 5GHz radio band with 10 times in Wireless Gateway | Release 5 | RDKM | 1 DOT0 |
34 |
24400420 | Enable/Disable both 2.4GHz, and 5Ghz and confirm Client connects/disconnects successfully | Release 4 | RDKM | 4 | Test to verify the default number of allowed clients for PublicWiFi Secure and open SSID using WebPA. | Release 5 | RDKM | 1 DOT0 |
35 |
25500115 | Verify 2.4 GHz WiFi beacon rate changing behavior | Release 4 | RDKM | 22 | Validate that SSH, telnet to LAN geteway IP from connected clients is not successful | Release 5 | RDKM | 1 DOT0 |
36 |
2620016 | Enable/Disable Broadcast SSID for 2.4 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 10 | Verify the reduction in power level of 2.4GHz WiFi Access Point does not impact the non-management frames | Release 5 | RDKM | 1 DOT0 |
37 |
2720026 | Enable/Disable Broadcast SSID for 5 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 10 | Verify the reduction in power level of 5GHz WiFi Access Point does not impact the non-management frames. | Release 5 | RDKM | 1 DOT0 |
38 |
28BAND-STEERING-10053 | Verify Set or Get PhyRate threshold for 2.4GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM | 5014 | 15 | This test case is to Verify the controlled user access (Allow) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 1 DOT0 |
39 |
29-BAND-STEERING-10043 | Verify Set or Get PhyRate threshold for 5GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM | _RADIO-1002 | 7 | Ability to disable WiFi Radio through WEBPA | Release 5 | RDKM | 1 DOT0 |
40 |
30BAND-STEERING-101115 | Set IdleInactiveTime and OverlaodInactiveTimne to values and verify cfg -s and lbd.conf is updated | Release 4 | RDKM | 5011 | 14 | This test case is to verify the controlled user access (Allow All) to the Specific Device for 2.4 and 5 GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 1 DOT0 |
41 |
31BAND-STEERING-10037 | verify the factory default value of Band steering paarmeters using webpa and dmcli | Release 4 | RDKM | 5012 | 15 | Verify the controlled user access (Allow) to the specific Devices for 2.4 GHZ against different MAC addresses by way of MACc ACLs | Release 5 | RDKM | 1 DOT0 |
42 |
32CONPERF-10005 | Find out the successful Wi-Fi connectivity rate of 2.4GHz radio band with 10 times in Wireless Gateway13 | Test to verify WiFi client connect disconnect events | Release 5 | RDKM |
331 DOT0 |
43 | TC-RDKB-WIFI-2GHZ-DHCP- |
CONPERF1001Find out the successful Wi-Fi connectivity rate of 5GHz radio band with 10 times in Wireless GatewayVerify the IP range in 2.4GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM |
3450204 | Test to verify the default number of allowed clients for PublicWiFi Secure and open SSID using WebPA5GHZ-DHCP-IPV4-DSBLE-5001 | 5 | Verify the IP range in 5GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | 1 DOT0 |
35CCNEG100122 | Validate that SSH, telnet to LAN geteway IP from connected clients is not successful14 | Verify 2.4 GHz SSID is enabled | Release 5 | RDKM | 1 DOT0 |
36-505310 | Verify the reduction in power level of 2.4GHz WiFi Access Point does not impact the non-management frames-KEY-PHARSE-5002 | 14 | Verify that the passphrase key of WIFI access point can be updated for 5 Ghz | Release 5 | RDKM | 1 DOT0 |
37505410 the reduction in power level of 5GHz WiFi Access Point does not impact the non-management frames.Security Mode for WiFi access bands (2.4 and 5 GHz) | Release 5 | RDKM |
RDKM38501415 | This test case is to Verify the controlled user access (Allow) for 5GHZ against different MAC addresses by way of MAC ACLsPOSSIBLE-CHANNELS-1001 | 4 | Verify that WIFI radio does not support channel number other than the possible channels defined | Release 5 | RDKM | 1 DOT0 |
39_RADIO-10027 | Ability to disable WiFi Radio through WEBPA-RESERVED-IP-1003 | 8 | Verify the Reserved IP for clients for Ethernet client | Release 5 | RDKM |
401 DOT0 |
50 | TC-RDKB-WIFI-RADIO- |
501114 | This test case is to verify the controlled user access (Allow All) to the Specific Device for 2.4 and 5 GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 25 | Verify that Wi-Fi connectivity of 2.4GHz frequency is not affected when 5GHz frequency Radio is disabled | Release 6 | RDKM | 1 DOT0 |
51 |
41501215 | Verify the controlled user access (Allow) to the specific Devices for 2.4 GHZ against different MAC addresses by way of MACc ACLs | Release 5 | RDKM | CC-IP-5001 | 30 | Verify that when WIFI Radio is disabled in CM, wireless CPE should not get an ip address | Release 6 | RDKM | 1 DOT0 |
52 |
42WIFICLIENT100113Test to verify WiFi client connect disconnect events | Release 5 | RDKM | Verify Client Connectivity to 5GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | 1 DOT0 |
53 |
432GHZ-DHCP-IPV4-DSBLE-50015 | Verify the IP range in 2.4GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | TRANS-1000 | 4 | Test to verify data transmission between 2 connected(LAN-WLAN;WLAN to LAN) clients | Release 6 | RDKM | 1 DOT0 |
54 |
445GHZDHCP-IPV4-DSBLE-50015 | Verify the IP range in 5GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | CONFIG-5072 | 20 | Verify Client Connectivity to 2.4GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | 1 DOT0 |
55 |
45KEYPHARSE-500114 | Verify 2.4 GHz SSID is enabled | Release 5 | RDKM | 8 | Test to verify Wi-Fi Interworking Information Element | Release 6 | RDKM | 1 DOT0 |
56 |
46KEYPHARSE500214 | Verify that the passphrase key of WIFI access point can be updated for 5 Ghz | Release 5 | RDKM | 29 | Test case is created as part of Configuration of Wi-Fi Tx Rate for 2.4GHz Radio and 5Ghz Radio | Release 6 | RDKM | 1 DOT0 |
57 |
47WIFI400516 | Verify Security Mode for WiFi access bands (2.4 and 5 GHz) | Release 5 | RDKM | 12 | Test case is to validate the failure authentication attempts | Release 6 | RDKM | 1 DOT0 |
58 |
48POSSIBLECHANNELS10014 that WIFI radio does not support channel number other than the possible channels definedthe WIFI Connectivity on Dual Band Radio 802.11n client with security mode open | Release 6 | RDKM | 1 DOT0 |
59 |
Release 5 | RDKM | 49WIFI-RESERVED-IP-10038 | Verify the Reserved IP for clients for Ethernet client | Release 5 | RDKM | MFPCONFIG-1002 | 4 | Verify power cycle persist the MFPConfig values | Release 7 | RDKM | 1 DOT0 |
60 |
50WIFIRADIO-500125 that Wi-Fi connectivity of 2.4GHz frequency is not affected when 5GHz frequency Radio is disabledMFPConfig is configurable by Wi-Fi HAL | Release 7 | RDKM | 1 DOT0 |
61 |
Release 6 | RDKM | 51-CC-IP-500130 | Verify that when WIFI Radio is disabled in CM, wireless CPE should not get an ip address | Release 6 | RDKM | _BLASTER-1001 | 13 | Test to verify Default values after factory reset and value persistent after reboot | Release 7 | RDKM | 1 DOT0 |
62 |
52-CHNL-CONFIG-507318 | Verify Client Connectivity to 5GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | _GAS-1001 | 25 | Verify WiFi GAS TR-181 parameters and their default values | Release 7 | RDKM | 1 DOT0 |
63 |
53 | TC-RDKB-FORCE_DISABLE_WIFI- |
TRANS-10004 | Test to verify data transmission between 2 connected(LAN-WLAN;WLAN to LAN) clients | Release 6 | RDKM | 21 | Verify force disable wifi radio functionality in bridge mode | Release 7 | RDKM | 1 DOT0 |
64 |
54-CHNL507220 | Verify Client Connectivity to 2.4GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | 8 | Validate the SSID name and BSSID of the Publicwifi | Release 7 | RDKM | 1 DOT0 |
65 |
55 | TC-RDKB-PUBLIC-WIFI-AUTO- |
IE10028 | Test to verify Wi-Fi Interworking Information Element | Release 6 | RDKM | 21 | Private WiFi channel selection should remain same post PublicWiFi enabled | Release 7 | RDKM | 1 DOT0 |
66 |
56TXRATECONFIG-506229 | Test case is created as part of Configuration of Wi-Fi Tx Rate for 2.4GHz Radio and 5Ghz Radio | Release 6 | RDKM | 9 | Verify the Reserved IP for clients for 2.4ghz | Release 7 | RDKM | 1 DOT0 |
67 |
57WIFISSID-200312 | Test case is to validate the failure authentication attempts | Release 6 | RDKM | WIFI-RESERVED-IP-1002 | 9 | Verify the Reserved IP for clients for 5ghz | Release 7 | RDKM | 1 DOT0 |
68 |
58CONFIGCC2258 | Verify the WIFI Connectivity on Dual Band Radio |
802.11n client for Client for 2.4 and 5 Ghz with security mode open | Release |
659 | TC-RDKB-MFPCONFIG-1002 | 4 | Verify power cycle persist the MFPConfig values | Release 7 | RDKM |
60MFPCONFIG-10034 | Verify MFPConfig is configurable by Wi-Fi HALWIFI-CC-RADIO-5001 | 46 | Verify enable one radio & disable another radio and check the internet connectivity | Release 7 | RDKM | 1 DOT0 |
61_BLASTER100113 | Test to verify Default values after factory reset and value persistent after reboot15 | This test case is to Verify the controlled user access (Deny) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM | 1 DOT0 |
62_GAS100125Verify WiFi GAS TR-181 parameters and their default valuesThis test case is to Verify the controlled user access (Deny) for 2.4GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM |
63-FORCE_DISABLE_WIFI-100221 | Verify force disable wifi radio functionality in bridge mode-WIFI-CONFIG-CC-5002 | 26 | Verify the WIFI Connectivity on Dual Band Radio 2.4 - 802.11n, 5-802.11ac with security mode WPA2-PSK ( AES ) | Release 7 | RDKM |
64PUBLICWIFICONFIG10018 | Validate the SSID name and BSSID of the Publicwifi12 | Method to verify Logging all occurrences of connections to LNF PSK SSIDs | Release 7 | RDKM |
65-PUBLICAUTOCH-300121 | Private WiFi channel selection should remain same post PublicWiFi enabled46 | Verify the default channel bandwidth and enable & disable the radio for 2.4GHz & 5GHz with connected clients | Release 7 | RDKM |
66RESERVEDIP9 | Verify the Reserved IP for clients for 2.4ghz | Release 7 | RDKM | 20 | Validate notification is not seen for unauthenticated clients | Release 8 | RDKM | 1 DOT0 |
76 |
67RESERVED-IP-10029 | Verify the Reserved IP for clients for 5ghz | Release 7 | RDKM | 5016 | 26 | Verify Connecting Multiple Clients to the Gateway device via Wi-Fi network and check the internet connectivity | Release 8 | RDKM | 1 DOT0 |
77 |
68SECTYOPEN-500158 | Verify the WIFI Connectivity on Dual Band Radio for Client for 2.4 and 5 Ghz with security mode open | Release 7 | RDKM | 1001 | 17 | Verify WiFi status after disabling and enabling | Release 8 | RDKM | 1 DOT0 |
78 |
69RADIO46 enable one radio & disable another radio and check the internet connectivityWG supports Open Security mode for 2.4 &5 GHZ frequency band | Release 8 | RDKM | 1 DOT0 |
79 |
Release 7 | RDKM | 70501515This test case is to Verify the controlled user access (Deny) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM | Verify WiFi status after disabling | Release 8 | RDKM | 1 DOT0 |
80 |
71501315This test case is to Verify the controlled user access (Deny) for 2.4GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM | Verify WG supports WAP2(AES) Security mode for 2.4 &5 GHZ frequency band with valid & invalid key passpharse | Release 8 | RDKM | 1 DOT0 |
81 |
72WIFICONFIGCC-500226 | Verify the WIFI Connectivity on Dual Band Radio 2.4 - 802.11n, 5-802.11ac with security mode WPA2-PSK ( AES ) | Release 7 | RDKM | 10 | Test to validate the private 24/5ghz_Verify BSSID remains same after Factory Reset | Release 8 | RDKM | 1 DOT0 |
82 |
73500412Method to verify Logging all occurrences of connections to LNF PSK SSIDs | Release 7 | RDKM | Test to verify that 802.11a should not be able to connect to CM when operating standard is 'b,g,n', 'g,n' mode | Release 9 | RDKM | 1 DOT0 |
83 |
74WIFICHANNEL500146 default channel bandwidth and enable & disable the radio for password validations when client connected to 2.4GHz |
& 5GHz with connected clients 775WIFICCAUTH100120 | Validate notification is not seen for unauthenticated clients | Release 8 | RDKM | 6 | Verify the password validations when client connected to 5GHz | Release 9 | RDKM | 1 DOT0 |
85 |
76WIFI-501626 | Verify Connecting Multiple Clients to the Gateway device via Wi-Fi network and check the internet connectivity | Release 8 | RDKM | LAN-HOME-NTW-PSWD-1003 | 6 | Verify the password validations when client connected to LAN | Release 9 | RDKM | 1 DOT0 |
86 |
77RESET1001 17 WiFi status after disabling and enablingthe configuration of Transmission Control Rate for 5Ghz(a,n,ac) Radio after reboot | Release 10 | RDKM | 1 DOT0 |
87 |
Release 8 | RDKM | 78CCOPEN16 | Verify WG supports Open Security mode for 2.4 &5 GHZ frequency band | Release 8 | RDKM | 12 | Validate the DHCP configuration Using SNMP | Release 10 | RDKM | 1 DOT0 |
88 |
79RESET17 | Verify WiFi status after disabling | Release 8 | RDKM | 15 | Prefer Private functionality should be applicable for Public WiFi open and secure hotspot SSIDs | Release 10 | RDKM | 1 DOT0 |
89 |
80CCWPA2-500122 WG supports WAP2(AES) Security mode for 2.4 &5 GHZ frequency band with valid & invalid key passpharsethe configuration of Transmission Control Rate for 5Ghz(n) Radio after reboot | Release 10 | RDKM | 1 DOT0 |
90 |
Release 8 | RDKM | 81BSSIDPERSIST100110Test to validate the private 24/5ghz_Verify BSSID remains same after Factory Reset | Release 8 | RDKM | Connect to the Connected client having 2.4GHZ WiFi Capability | Release 10 | RDKM | 1 DOT0 |
91 |
82CCWIN-50036 | Test to verify that 802.11a should not be able to connect to CM when operating standard is 'b,g,n', 'g,n' mode | Release 9 | RDKM | 51 | Verify WiFi settings after Migration to QA Release | Release11 | RDKM | 1 DOT0 |
92 |
832GHZ-HOME-NTW-PSWD-6 | Verify the password validations when client connected to 2.4GHz | Release 9 | RDKM | 20 | Test to verify XPC notification for public hotspot parameters with invalid values using webpa | Release12 | RDKM | 1 DOT0 |
93 |
845GHZHOMENTW-PSWD6 the password validations when client connected to 5GHzinternet access to the part of keyword added to manages sites are accessible in Wi-Fi. | Release 17 | RDKM | 1 DOT0 |
94 |
Release 9 | RDKM | 85LANHOME-NTW-PSWD-10036 | Verify the password validations when client connected to LAN | Release 9 | RDKM | PARTNER-9003 | 8 | Verify Wi-Fi Driver supports an API used by RDKB to set the Wi-Fi Region | Release 17 | RDKM | 1 DOT0 |
95 |
86WIFISCRTYCHECK-100112 | Validate Selecting open risky mode and cancelling it immediately should not gray out password field Ethernet | Release 9 | RDKM | 6 | Verify Change in Wi-Fi region is reflected in regulatory region after device reboot. | Release 17 | RDKM | 1 DOT0 |
96 |
87WIFISCRTY-CHECK-100212 | Validate Selecting open risky mode and cancelling it immediately should not gray out password field Wifi 2.4Ghz client | Release 9 | RDKM | DEFAULT_ENCRY-2053 | 9 | To Verify 2.4GHz: Default SSID, Protection mode and encryption mode. | Release 17 | Vodafone | 1 DOT0 |
97 |
88WIFISCRTYCHECK-100312 | Validate Selecting open risky mode and cancelling it immediately should not gray out password field Wifi 5Ghz client | Release 9 | RDKM | 3 | To validate if an error message is displayed when gateway address is set to outside of the range. | Release 17 | Vodafone | 1 DOT0 |
98 |
89PWDMGMT100115 | Verify the password management for WEBUI user for Admin page | Release 9 | RDKM | 5 | To validate if 2 Wi-Fi LAN connected devices can communicate via host name. | Release 17 | Vodafone | 1 DOT0 |
99 |
90CONDEV500114Verify the details of connected clients can be retrieved from User admin page | Release 9 | RDKM | To verify the device must be able to connect 2.4GHz Wi-Fi and Internet should work. | Release 17 | Vodafone | 1 DOT0 |
100 |
91CHANNELBANDWIDTH100117 | Login to Lan side GUI page of device | Release 9 | RDKM | 4 | To verify the Boot Time of the device is less than 5 MIN (300s) | Release 17 | Vodafone | 1 DOT0 |
101 |
92WIFIRADIO300114 | Verify the configuration of Transmission Control Rate for 5Ghz(a,n,ac) Radio after reboot | Release 10 | RDKM | 12 | To verify SNMP walk/Get/Set on RDKB MIBs for CM IPv4 and IPv6 | Release 17 | Vodafone | 1 DOT0 |
102 |
93WIFIDHCP-SNMP500112Validate the DHCP configuration Using SNMP | Release 10 | RDKM | To verify if the Dut is accessible using CM IPv6 Address. | Release 17 | Vodafone | 1 DOT0 |
103 |
94WIFIPREFERPRIVATE100215 | Prefer Private functionality should be applicable for Public WiFi open and secure hotspot SSIDs | Release 10 | RDKM | 2 | The DHCP settings should not allow user to set same DHCP Pool MinAddress and MaxAddress- max CPE as One. | Release 17 | Vodafone | 1 DOT0 |
104 |
95PUBLICWIFI-CONFIG-50028 | Verify public WiFi Configuration Using LAN Admin Login | Release 10 | RDKM | MAC_FILTER-2056 | 7 | Wi-Fi MAC Filter - Allow. | Release 17 | Vodafone | 1 DOT0 |
105 |
96 | TC-RDKB-PUBLIC-WIFI-CONFIG-5003 | 8 | Verify public WiFi Configuration Using LAN Admin Login 5 GHz | Release 10 | RDKM |
97WIFIRADIO300214 | Verify the configuration of Transmission Control Rate for 5Ghz(n) Radio after reboot | Release 10 | RDKM | 15 | Verify Wired performance (TCP) test on WAN to LAN side (Smoke). | Release 17 | Vodafone | 1 DOT0 |
106 | 3DOT0- |
98 | WIFIPREFERPRIVATE100315 | Connect to the Connected client having 2.4GHZ WiFi Capability | Release 10 | RDKM | 21 | Wi-Fi DFS support in MESH solution | Release 18 | RDKM | 3 DOT0 |
107 |
99MIGRATION100151Verify WiFi settings after Migration to QA Release | Release11 | RDKM | 100 | Test to verify WiFi power tables | Release 19 | RDKM | 1 DOT0 |
108 | 3DOT0-TC-RDKB- |
HOTSPOT_INVALID20 | Test to verify XPC notification for public hotspot parameters with invalid values using webpa | Release12 | RDKM | 11 | Compare the time stamp of the Single client uuid in wiFiLog.txt.0 and Received upstream event data in PARODUSLOg.txt.0 | Release 19 | RDKM | 3 DOT0 |
109 |
101CHANNELBANDWIDTH100224 channel bandwidth of 5Ghz wifi ssid from Lan GUIthe wireless client connected to 2.4 GHz Private Wi-Fi network is blocked for all days & for particular time period | Release 20 | RDKM | 1 DOT0 |
110 |
Release12 | RDKM | 102PC-MNG-SITE-100212 | Verify internet access to the part of keyword added to manages sites are accessible in Wi-Fi. | Release 17 | RDKM | OneWiFi-1000 | 8 | Validate client connectivity with 6GHz, 5GHz High, 5GHz Low bands in OneWifi | Release 20 | RDKM | 1 DOT0 |
111 |
103SYNDICATEPARTNER90038 | Verify Wi-Fi Driver supports an API used by RDKB to set the Wi-Fi Region | Release 17 | RDKM | 23 | Verify the internet connectivity and iperf traffic when client mode is set to 'g' for 2.4 GHz and 'a' for 5 GHz. | Release 20 | RDKM | 1 DOT0 |
112 |
104SYNDICATEPARTNER90026 | Verify Change in Wi-Fi region is reflected in regulatory region after device reboot16 | Verify the connectivity of 5ghz wifi on different configurations. | Release |
17102 | IPV4GATEWAYIP-20133 | To validate if an error message is displayed when gateway address is set to outside of the range. | Release 17 | Vodafone | 18 | Monitor for WIFI_ERROR_WifiDmCliError marker after upgrade and Ccspwifi process is in zombie state. | Release 20 | RDKM | 3 DOT0 |
114 |
103IPV4HOSTNAME20195 | To validate if 2 Wi-Fi LAN connected devices can communicate via host name. | Release 17 | Vodafone | 8 | Validate the 2.4G Utilization with Increased Population of Devices | Release 21 | RDKM | 1 DOT0 |
115 |
104IPV4-NETACCESS-20335 | To verify the device must be able to connect 2.4GHz Wi-Fi and Internet should work. | Release 17 | Vodafone | WIFI-LATENCY-CLIENT-1001 | 6 | Coverage Improvement for Latency in Wifi clients | Release 21 | RDKM | 1 DOT0 |
116 | 3DOT0-TC-RDKB-WIFI_DB-1001 | 6 | Store RDKB Wi-FI DB in encrypted NVRAM | Release 21 | RDKM | 3 DOT0 |
117 |
105 | TC-RDKB-IPV4-BOOTTIME-2039 | 4 | To verify the Boot Time of the device is less than 5 MIN (300s) | Release 17 | Vodafone |
106IPV4CM2043To verify SNMP walk/Get/Set on RDKB MIBs for CM IPv4 and IPv6 | Release 17 | Vodafone | Validate data model and default configuration settings for client activity stats telemetry markers | Release 22 | RDKM | 1 DOT0 |
118 |
107IPV4-CM-20453 | To verify if the Dut is accessible using CM IPv6 Address. | Release 17 | Vodafone | SPECTRUM-ANALYZER-5001 | 7 | Verify WiFi Spectrum Analyzer tab contains fields like Band, channel, MAC, SSID, Signal Level, Mode, Security. | Release 22 | RDKM | 1 DOT0 |
119 |
108IPV4DHCP20542 | The DHCP settings should not allow user to set same DHCP Pool MinAddress and MaxAddress- max CPE as One. | Release 17 | Vodafone | 16 | Test to verify password failure for private SSID | Release 22 | RDKM | 1 DOT0 |
120 |
109IPV4MAC_FILTER20567 | Wi-Fi MAC Filter - Allow. | Release 17 | Vodafone | 9 | Verify Manual channel selection for WiFi frequency band using tr69/webpa | Release 23 | RDKM | 1 DOT0 |
121 |
110IPV4PORTFW2052 Wired performance (TCP) test on WAN to LAN side (Smoke).the RFC support on set & get of Private WiFi password via SNMP and verify the gateway supports to set & get private WiFi password via WebPA regardless of RFC status. | Release 23 | RDKM | 1 DOT0 |
122 |
Release 17 | Vodafone | 111PWR10069 | Test to verify WiFi power tables | Release 19 | 21 | Validate Telemetry Marker for WiFi Channel Utilization | Release 24 | RDKM | 1 DOT0 |
RDKM