RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
Module | TR-181 DM Parameter | Purpose / Inputs |
---|---|---|
WebConfig | dmcli eRT getv Device.X_RDK_WebConfig.RfcEnable | enabled enable/disable webconfig |
dmcli eRT getv Device.X_RDK_WebConfig.URL | By default this DM is empty. It Should have webconfig server url with CPE MAC Address | |
dmcli eRT setv Device.X_RDK_WebConfig.URL string http://webconfig.rdkcentral.com:9007/api/v1/device/<CPE MAC>/config | replace CPE MAC and set URL for ex: http://webconfig.rdkcentral.com:9007/api/v1/device/aabbccddeeff/config | |
dmcli eRT getv Device.X_RDK_WebConfig.URL | verify URL set or not | |
dmcli eRT getv Device.X_RDK_WebConfig.ForceSync | Value "root" for ForceSync DM - to sync all the values from webconfig server to CPE devices. Value "telemetry" for ForceSync DM - to sync telemetryprofile data's | |
dmcli eRT getv Device.X_RDK_WebConfig.SupplementaryServiceUrls.Telemetry | By default this DM is empty. It Should have webconfig server url with CPE MAC Address | |
dmcli eRT setv Device.X_RDK_WebConfig.SupplementaryServiceUrls.Telemetry string http://webconfig.rdkcentral.com:9007/api/v1/device/<CPE MAC>/config | replace CPE MAC and set URL .This is used for telemetry feature. for ex: http://webconfig.rdkcentral.com:9007/api/v1/device/aabbccddeeff/config | |
dmcli eRT setv Device.X_RDK_WebConfig.SupplementaryServiceUrls.Telemetry string NULL | Disabling WebConfig telemetry Supplementary Services |
...
subdoc_name : privatessid
...
MAC : CPE_MAC (Ex : d83add3c5cc3)
2. In CPE , trigger the below command,
root@RaspberryPi-Gateway:/rdklogs/logs# dmcli eRT setv Device.X_RDK_WebConfig.ForceSync string root CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. setv from/to component(webconfig): Device.X_RDK_WebConfig.ForceSync Execution succeed. |
3 3. Using dmcli to check the wifi DM parameters
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
root@RaspberryPi-Gateway:/# dmcli eRT getv Device.WiFi.SSID.1.SSID CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.SSID.1.SSID Execution succeed. Parameter 1 name: Device.WiFi.SSID.1.SSID type: string, value: Test_webconfig_2g root@RaspberryPi-Gateway:/# dmcli eRT getv Device.WiFi.SSID.2.SSID CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.SSID.2.SSID Execution succeed. Parameter 1 name: Device.WiFi.SSID.2.SSID type: string, value: Test_webconfig_5g root@RaspberryPi-Gateway:/# dmcli eRT getv Device.WiFi.AccessPoint.1.Security.KeyPassphrase CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.Security.KeyPassphrase Execution succeed. Parameter 1 name: Device.WiFi.AccessPoint.1.Security.KeyPassphrase type: string, value: webconfig_2g root@RaspberryPi-Gateway:/# dmcli eRT getv Device.WiFi.AccessPoint.2.Security.KeyPassphrase CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.2.Security.KeyPassphrase Execution succeed. Parameter 1 name: Device.WiFi.AccessPoint.2.Security.KeyPassphrase type: string, value: webconfig_5g root@RaspberryPi-Gateway:/# iw wlan0 info Interface wlan0 ifindex 16 wdev 0x1 addr d8:3a:dd:3c:5c:c5 ssid Test_webconfig_2g type AP wiphy 0 channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz txpower 31.00 dBm root@RaspberryPi-Gateway:/# root@RaspberryPi-Gateway:/# iw wlan1 info Interface wlan1 ifindex 17 wdev 0x100000001 addr d0:37:45:f2:3c:b9 ssid Test_webconfig_5g type AP wiphy 1 txpower 23.00 dBm |
4 4. Success Logs
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
240425-08:17:40.189970 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: doc privatessid is updated to version 289218514 status pending error_details none error_code 0 trans_id 0 temp->retry_count 0 240425-08:17:40.190537 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: subdoc_name: privatessid, version: 289218514, transaction_id: 25012 240425-08:17:40.190669 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: doc privatessid is updated to version 289218514 status pending error_details none error_code 0 trans_id 25012 temp->retry_count 0 240425-08:17:40.190736 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: Request:> param[0].name = Device.WiFi.Private, type = 5 240425-08:17:40.195397 [mod=WEBCONFIG, lvl=INFO] [tid=2909] WEBCONFIG: Received msg privatessid,25012,289218514,ACK,90 from topic webconfigSignal 240425-08:17:40.195501 [mod=WEBCONFIG, lvl=INFO] [tid=2909] WEBCONFIG: Received webconfig event signal Info privatessid,25012,289218514,ACK,90 240425-08:17:40.195649 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: TIMEOUT EVENT: privatessid,25012,289218514,ACK,90 (doc apply need time) 240425-08:17:40.195731 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: doc apply need time, start timer. 240425-08:17:40.195799 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: Timer list is empty 240425-08:17:40.195921 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: new_node->subdoc_name privatessid new_node->txid 25012 new_node->timeout 90 status 1 added to list 240425-08:17:40.195984 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: startWebcfgTimer success 240425-08:17:40.196150 [mod=WEBCONFIG, lvl=INFO] [tid=4377] WEBCONFIG: dest is event:subdoc-report/privatessid/mac:d83add3c5cc3/ack 240425-08:17:40.196231 [mod=WEBCONFIG, lvl=INFO] [tid=4377] WEBCONFIG: stringifiedNotifyPayload is {"device_id":"mac:d83add3c5cc3","namespace":"privatessid","application_status":"pending","timeout":90,"transaction_uuid":"c64bb03a-d4d0-4f30-9cfc-53bc18fd367b","version":"289218514"} 240425-08:17:40.196421 [mod=WEBCONFIG, lvl=INFO] [tid=4377] WEBCONFIG: Notification successfully sent to Webconfig.Upstream 240425-08:17:40.197419 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: The ret status for rbus_setMulti is 0 240425-08:17:40.197505 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: ccspRetStatus is 100 240425-08:17:40.227876 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: Request:> param[0].name = Device.WiFi.Private, type = 5 240425-08:17:40.228193 [mod=WEBCONFIG, lvl=INFO] [tid=2909] WEBCONFIG: Received msg privatessid,25012,289218514,ACK,0 from topic webconfigSignal 240425-08:17:40.228284 [mod=WEBCONFIG, lvl=INFO] [tid=2909] WEBCONFIG: Received webconfig event signal Info privatessid,25012,289218514,ACK,0 240425-08:17:40.228459 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: ACK EVENT: privatessid,25012,289218514,ACK,0 (doc apply success) 240425-08:17:40.228526 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: doc apply success, proceed to add to DB |
...
subdoc_name : lan
subdoc_data :
...
MAC : CPE_MAC (Ex : d83add3c5cc3)
2. In CPE , trigger the ForceSync as "root"
3. Using dmcli to check the DM
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
root@RaspberryPi-Gateway:/# dmcli eRT getv Device.DHCPv4.Server.Pool.1.MinAddress CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.DHCPv4.Server.Pool.1.MinAddress Execution succeed. Parameter 1 name: Device.DHCPv4.Server.Pool.1.MinAddress type: string, value: 10.0.0.8 root@RaspberryPi-Gateway:/# dmcli eRT getv Device.DHCPv4.Server.Pool.1.LeaseTime CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.DHCPv4.Server.Pool.1.LeaseTime Execution succeed. Parameter 1 name: Device.DHCPv4.Server.Pool.1.LeaseTime type: int, value: 7200 root@RaspberryPi-Gateway:/# dmcli eRT getv Device.DHCPv4.Server.Pool.1.MaxAddress CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.DHCPv4.Server.Pool.1.MaxAddress Execution succeed. Parameter 1 name: Device.DHCPv4.Server.Pool.1.MaxAddress type: string, value: 10.0.0.240 |
4. Success Logs
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
240423-06:06:16.534327 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc lan is updated to version 627376240 status pending error_details none error_code 0 trans_id 0 temp->retry_count 0 240423-06:06:16.534921 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: subdoc_name: lan, version: 627376240, transaction_id: 8517 240423-06:06:16.535035 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc lan is updated to version 627376240 status pending error_details none error_code 0 trans_id 8517 temp->retry_count 0 240423-06:06:16.535104 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: Request:> param[0].name = Device.DHCPv4.Server.Lan, type = 5 240423-06:06:16.538867 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received msg lan,8517,627376240,ACK,13 from topic webconfigSignal 240423-06:06:16.538964 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received webconfig event signal Info lan,8517,627376240,ACK,13 240423-06:06:16.539538 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: TIMEOUT EVENT: lan,8517,627376240,ACK,13 (doc apply need time) 240423-06:06:16.539607 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: doc apply need time, start timer. 240423-06:06:16.539665 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: Timer list is empty 240423-06:06:16.539725 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: new_node->subdoc_name lan new_node->txid 8517 new_node->timeout 13 status 1 added to list 240423-06:06:16.539780 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: startWebcfgTimer success 240423-06:06:16.540403 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: dest is event:subdoc-report/lan/mac:d83add3c5cc3/ack 240423-06:06:16.540489 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: stringifiedNotifyPayload is {"device_id":"mac:d83add3c5cc3","namespace":"lan","application_status":"pending","timeout":13,"transaction_uuid":"bc673958-91ea-4b7b-b068-1c7d9252417f","version":"627376240"} 240423-06:06:16.540695 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: Notification successfully sent to Webconfig.Upstream 240423-06:06:16.540700 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: The ret status for rbus_setMulti is 0 240423-06:06:16.541295 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: ccspRetStatus is 100 240423-06:06:16.541364 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: setValues success. ccspStatus : 100 |
...
subdoc_name: wan
subdoc_data :
...
MAC : CPE_MAC (Ex : d83add3c5cc3)
2. In CPE , trigger root as ForceSync
3. Using dmcli to check the DM,
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
root@RaspberryPi-Gateway:/usr/www2# dmcli eRT getv Device.NAT.X_CISCO_COM_DMZ.Enable CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.NAT.X_CISCO_COM_DMZ.Enable Execution succeed. Parameter 1 name: Device.NAT.X_CISCO_COM_DMZ.Enable type: bool, value: true root@RaspberryPi-Gateway:/usr/www2# dmcli eRT getv Device.NAT.X_CISCO_COM_DMZ.InternalIP CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.NAT.X_CISCO_COM_DMZ.InternalIP Execution succeed. Parameter 1 name: Device.NAT.X_CISCO_COM_DMZ.InternalIP type: string, value: 10.0.0.17 |
4. Success Logs
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
240423-06:14:24.589883 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc wan is updated to version 3808881139 status pending error_details none error_code 0 trans_id 0 temp->retry_count 0 240423-06:14:24.590358 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: subdoc_name: wan, version: 3808881139, transaction_id: 5016 240423-06:14:24.590448 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc wan is updated to version 3808881139 status pending error_details none error_code 0 trans_id 5016 temp->retry_count 0 240423-06:14:24.590494 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: Request:> param[0].name = Device.NAT.X_CISCO_COM_DMZ.Data, type = 5 240423-06:14:24.593472 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received msg wan,5016,3808881139,ACK,10 from topic webconfigSignal 240423-06:14:24.593540 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received webconfig event signal Info wan,5016,3808881139,ACK,10 240423-06:14:24.593638 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: TIMEOUT EVENT: wan,5016,3808881139,ACK,10 (doc apply need time) 240423-06:14:24.593688 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: doc apply need time, start timer. 240423-06:14:24.593749 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: Timer list is empty 240423-06:14:24.593796 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: new_node->subdoc_name wan new_node->txid 5016 new_node->timeout 10 status 1 added to list 240423-06:14:24.593834 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: startWebcfgTimer success 240423-06:14:24.593973 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: dest is event:subdoc-report/wan/mac:d83add3c5cc3/ack 240423-06:14:24.594023 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: stringifiedNotifyPayload is {"device_id":"mac:d83add3c5cc3","namespace":"wan","application_status":"pending","timeout":10,"transaction_uuid":"ae7952f3-1886-47aa-9427-dfca584a1f2d","version":"3808881139"} 240423-06:14:24.594147 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: Notification successfully sent to Webconfig.Upstream 240423-06:14:24.595800 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: The ret status for rbus_setMulti is 0 240423-06:14:24.595864 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: ccspRetStatus is 100 240423-06:14:24.595912 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: setValues success. ccspStatus : 100 |
...
subdoc_name : port_forwarding
...
MAC : CPE_MAC (Ex : d83add3c5cc3)
2. In CPE, trigger ForceSync as root
3. Using dmcli to check the DM
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
root@RaspberryPi-Gateway:~# dmcli eRT getv Device.NAT. CR component name is: eRT.com.cisco.spvtg.ccsp.CR subsystem_prefix eRT. getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.NAT. Execution succeed. Parameter 1 name: Device.NAT.X_CISCO_COM_TCPTimeout type: uint, value: 0 Parameter 2 name: Device.NAT.X_CISCO_COM_UDPTimeout type: uint, value: 0 Parameter 3 name: Device.NAT.X_CISCO_COM_ICMPTimeout type: uint, value: 0 Parameter 4 name: Device.NAT.X_Comcast_com_EnablePortMapping type: bool, value: true Parameter 5 name: Device.NAT.X_Comcast_com_EnableHSPortMapping type: bool, value: true Parameter 6 name: Device.NAT.X_Comcast_com_EnableNATMapping type: bool, value: false Parameter 7 name: Device.NAT.PortMappingNumberOfEntries type: uint, value: 3 Parameter 8 name: Device.NAT.X_CISCO_COM_DMZ.Enable type: bool, value: false Parameter 9 name: Device.NAT.X_CISCO_COM_DMZ.RemoteIPStart type: string, value: Parameter 10 name: Device.NAT.X_CISCO_COM_DMZ.RemoteIPEnd type: string, value: Parameter 11 name: Device.NAT.X_CISCO_COM_DMZ.InternalIP type: string, value: 0.0.0.0 Parameter 12 name: Device.NAT.X_CISCO_COM_DMZ.InternalMAC type: string, value: Parameter 13 name: Device.NAT.X_CISCO_COM_DMZ.IPv6Host type: string, value: Parameter 14 name: Device.NAT.X_CISCO_COM_DMZ.Data type: string, value: Parameter 15 name: Device.NAT.PortMapping.1.Enable type: bool, value: true Parameter 16 name: Device.NAT.PortMapping.1.Status type: string, value: Enabled Parameter 17 name: Device.NAT.PortMapping.1.Alias type: string, value: Parameter 18 name: Device.NAT.PortMapping.1.AllInterfaces type: bool, value: true Parameter 19 name: Device.NAT.PortMapping.1.LeaseDuration type: uint, value: 0 Parameter 20 name: Device.NAT.PortMapping.1.ExternalPort type: uint, value: 23 Parameter 21 name: Device.NAT.PortMapping.1.ExternalPortEndRange type: uint, value: 23 Parameter 22 name: Device.NAT.PortMapping.1.InternalPort type: uint, value: 0 Parameter 23 name: Device.NAT.PortMapping.1.Protocol type: string, value: BOTH Parameter 24 name: Device.NAT.PortMapping.1.InternalClient type: string, value: 10.0.0.111 Parameter 25 name: Device.NAT.PortMapping.1.RemoteHost type: string, value: 0.0.0.0 Parameter 26 name: Device.NAT.PortMapping.1.X_Comcast_com_PublicIP type: string, value: 0.0.0.0 Parameter 27 name: Device.NAT.PortMapping.1.Description type: string, value: telnet Parameter 28 name: Device.NAT.PortMapping.1.Interface type: string, value: Parameter 29 name: Device.NAT.PortMapping.1.X_CISCO_COM_InternalClientV6 type: string, value: x Parameter 30 name: Device.NAT.PortMapping.2.Enable type: bool, value: true Parameter 31 name: Device.NAT.PortMapping.2.Status type: string, value: Enabled Parameter 32 name: Device.NAT.PortMapping.2.Alias type: string, value: Parameter 33 name: Device.NAT.PortMapping.2.AllInterfaces type: bool, value: true Parameter 34 name: Device.NAT.PortMapping.2.LeaseDuration type: uint, value: 0 Parameter 35 name: Device.NAT.PortMapping.2.ExternalPort type: uint, value: 25 Parameter 36 name: Device.NAT.PortMapping.2.ExternalPortEndRange type: uint, value: 25 Parameter 37 name: Device.NAT.PortMapping.2.InternalPort type: uint, value: 0 Parameter 38 name: Device.NAT.PortMapping.2.Protocol type: string, value: BOTH Parameter 39 name: Device.NAT.PortMapping.2.InternalClient type: string, value: 10.0.0.112 Parameter 40 name: Device.NAT.PortMapping.2.RemoteHost type: string, value: 0.0.0.0 Parameter 41 name: Device.NAT.PortMapping.2.X_Comcast_com_PublicIP type: string, value: 0.0.0.0 Parameter 42 name: Device.NAT.PortMapping.2.Description type: string, value: mail Parameter 43 name: Device.NAT.PortMapping.2.Interface type: string, value: Parameter 44 name: Device.NAT.PortMapping.2.X_CISCO_COM_InternalClientV6 type: string, value: x Parameter 45 name: Device.NAT.PortMapping.3.Enable type: bool, value: true Parameter 46 name: Device.NAT.PortMapping.3.Status type: string, value: Enabled Parameter 47 name: Device.NAT.PortMapping.3.Alias type: string, value: Parameter 48 name: Device.NAT.PortMapping.3.AllInterfaces type: bool, value: true Parameter 49 name: Device.NAT.PortMapping.3.LeaseDuration type: uint, value: 0 Parameter 50 name: Device.NAT.PortMapping.3.ExternalPort type: uint, value: 443 Parameter 51 name: Device.NAT.PortMapping.3.ExternalPortEndRange type: uint, value: 443 Parameter 52 name: Device.NAT.PortMapping.3.InternalPort type: uint, value: 0 Parameter 53 name: Device.NAT.PortMapping.3.Protocol type: string, value: BOTH Parameter 54 name: Device.NAT.PortMapping.3.InternalClient type: string, value: 10.0.0.102 Parameter 55 name: Device.NAT.PortMapping.3.RemoteHost type: string, value: 0.0.0.0 Parameter 56 name: Device.NAT.PortMapping.3.X_Comcast_com_PublicIP type: string, value: 0.0.0.0 Parameter 57 name: Device.NAT.PortMapping.3.Description type: string, value: https Parameter 58 name: Device.NAT.PortMapping.3.Interface type: string, value: Parameter 59 name: Device.NAT.PortMapping.3.X_CISCO_COM_InternalClientV6 type: string, value: x Parameter 60 name: Device.NAT.X_RDK_PortMapping.Data type: string, value: Parameter 61 name: Device.NAT.X_CISCO_COM_PortTriggers.Enable type: bool, value: false Parameter 62 name: Device.NAT.X_CISCO_COM_PortTriggers.TriggerNumberOfEntries type: uint, value: 0 |
4. Success Logs
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
240423-06:29:55.135135 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc portforwarding is updated to version 3329431262 status pending error_details none error_code 0 trans_id 0 temp->retry_count 0 240423-06:29:55.135651 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: subdoc_name: portforwarding, version: 3329431262, transaction_id: 63776 240423-06:29:55.135754 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc portforwarding is updated to version 3329431262 status pending error_details none error_code 0 trans_id 63776 temp->retry_count 0 240423-06:29:55.135811 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: Request:> param[0].name = Device.NAT.X_RDK_PortMapping.Data, type = 5 240423-06:29:55.139435 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received msg portforwarding,63776,3329431262,ACK,19 from topic webconfigSignal 240423-06:29:55.139522 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received webconfig event signal Info portforwarding,63776,3329431262,ACK,19 240423-06:29:55.139694 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: TIMEOUT EVENT: portforwarding,63776,3329431262,ACK,19 (doc apply need time) 240423-06:29:55.139765 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: doc apply need time, start timer. 240423-06:29:55.139840 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: Timer list is empty 240423-06:29:55.139912 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: new_node->subdoc_name portforwarding new_node->txid 63776 new_node->timeout 19 status 1 added to list 240423-06:29:55.139967 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: startWebcfgTimer success 240423-06:29:55.140139 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: dest is event:subdoc-report/portforwarding/mac:d83add3c5cc3/ack 240423-06:29:55.140202 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: stringifiedNotifyPayload is {"device_id":"mac:d83add3c5cc3","namespace":"portforwarding","application_status":"pending","timeout":19,"transaction_uuid":"6acc5f86-542d-46fd-bcbe-f63b67fbce45","version":"3329431262"} 240423-06:29:55.140383 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: Notification successfully sent to Webconfig.Upstream 240423-06:29:55.142148 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: The ret status for rbus_setMulti is 0 240423-06:29:55.142234 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: ccspRetStatus is 100 |
...
root@RaspberryPi-Gateway:~# dmcli eRT getv Device.X_RDK_WebConfig.SupplementaryServiceUrls.Telemetry |
4. Trigger the below command in CPE
dmcli eRT setv Device.X_RDK_WebConfig.ForceSync string telemetry |
5. When T2 profiles are received via WebConfig, they are persisted in msgPack format in /nvram/
.t2reportprofiles
/profiles
.msgpack
root@RaspberryPi-Gateway:/nvram/.t2reportprofiles# ls profiles.msgpack |
6. To check that the device received the profiles on the device, you can get a human-readable version of the profiles.msgpack file by doing the following on the device
webcfg_decoder -m profiles.msgpack
Sample data:
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
root@RaspberryPi-Gateway:/nvram/.t2reportprofiles# webcfg_decoder -m profiles.msgpack
rbus_open for component webcfg_decoder
rbus_init is success. ret is 0
msgpack decoded data is:
{"profiles":[{"name":"DM_DEVICEINFO_PROFILE", "versionHash":"cf3d1060", "value":{"Protocol":"HTTP", "EncodingType":"JSON", "ReportingInterval":600.000000, "ActivationTimeOut":1800.000000, "Parameter":[{"reference":"Device.DeviceInfo.X_COMCAST-COM_CM_MAC", "type":"dataModel", "name":"CmMacT1"}, {"type":"dataModel", "name":"ClearResetCount", "reference":"Device.DeviceInfo.ClearResetCount"}, {"type":"dataModel", "name":"Desc", "reference":"Device.DeviceInfo.Description"}, {"reference":"Device.DeviceInfo.FactoryResetCount", "type":"dataModel"}, {"type":"dataModel", "name":"MemFree", "reference":"Device.DeviceInfo.Hardware_MemFree"}, {"type":"dataModel", "name":"MemUsed", "reference":"Device.DeviceInfo.Hardware_MemUsed"}, {"type":"dataModel", "name":"HwVer", "reference":"Device.DeviceInfo.HardwareVersion"}, {"type":"dataModel", "name":"MemStatFree", "reference":"Device.DeviceInfo.MemoryStatus.Free"}, {"type":"dataModel", "name":"MemStatTotal", "reference":"Device.DeviceInfo.MemoryStatus.Total"}, {"type":"dataModel", "name":"MemStatUsed", "reference":"Device.DeviceInfo.MemoryStatus.Used"}, {"type":"dataModel", "name":"FrMemThrshld", "reference":"Device.DeviceInfo.MemoryStatus.X_RDKCENTRAL-COM_FreeMemThreshold"}, {"type":"dataModel", "name":"CpuUsage", "reference":"Device.DeviceInfo.ProcessStatus.CPUUsage"}, {"name":"Uptime", "reference":"Device.DeviceInfo.UpTime", "type":"dataModel"}], "Version":"1", "TimeReference":"0001-01-01T00:00:00Z", "HTTP":{"Compression":"None", "Method":"POST", "RequestURIParameter":[{"Name":"deviceId", "Reference":"Device.DeviceInfo.X_COMCAST-COM_CM_MAC"}, {"Name":"profileName", "Reference":"Profile.Name"}], "URL":"https://xconf.rdkcentral.com/xconf/telemetry_upload.php"}, "JSONEncoding":{"ReportFormat":"NameValuePair", "ReportTimestamp":"None"}}}, {"name":"RDKB-RPI-SELFHEALPROFILE", "versionHash":"de899a23", "value":{"Protocol":"HTTP", "EncodingType":"JSON", "ReportingInterval":600.000000, "HTTP":{"URL":"https://xconf.rdkcentral.com/xconf/telemetry_upload.php", "Compression":"None", "Method":"POST", "RequestURIParameter":[{"Name":"deviceId", "Reference":"Device.DeviceInfo.X_COMCAST-COM_CM_MAC"}, {"Name":"profileName", "Reference":"Profile.Name"}]}, "Description":"Report to check SelfHeal Parameters", "TimeReference":"0001-01-01T00:00:00Z", "ActivationTimeOut":1800.000000, "Parameter":[{"type":"dataModel", "name":"Profile", "reference":"Device.DeviceInfo.X_RDK.RDKProfileName"}, {"type":"dataModel", "name":"Time", "reference":"Device.Time.CurrentLocalTime"}, {"reference":"Device.DeviceInfo.X_COMCAST-COM_WAN_MAC", "type":"dataModel", "name":"mac"}, {"type":"dataModel", "name":"erouterIpv4", "reference":"Device.DeviceInfo.X_COMCAST-COM_WAN_IP"}, {"type":"dataModel", "name":"erouterIpv6", "reference":"Device.DeviceInfo.X_COMCAST-COM_WAN_IPv6"}, {"type":"dataModel", "name":"PartnerId", "reference":"Device.DeviceInfo.X_RDKCENTRAL-COM_Syndication.PartnerId"}, {"name":"Version", "reference":"Device.DeviceInfo.SoftwareVersion", "type":"dataModel"}, {"type":"dataModel", "name":"AccountId", "reference":"Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.AccountInfo.AccountID"}, {"type":"dataModel", "name":"MAC", "reference":"Device.DeviceInfo.X_COMCAST-COM_CM_MAC"}, {"type":"dataModel", "reference":"Profile.Name"}, {"type":"dataModel", "reference":"Profile.Version"}, {"reference":"Device.DeviceInfo.UpTime", "use":"absolute", "type":"dataModel", "name":"UpTime"}, {"type":"event", "eventName":"SYS_ERROR_AdvSecurity_NotRunning", "component":"test_and_diagnostics", "use":"absolute"}, {"type":"event", "eventName":"SYS_SH_lighttpdCrash", "component":"test_and_diagnostics", "use":"count", "reportEmpty":false}, {"reportEmpty":false, "type":"event", "name":"FirmwareStart_Time", "eventName":"Firmware upgrade start time :", "component":"test_and_diagnostics", "use":"count"}, {"name":"WAN_SSH_STATUS", "reference":"Device.DeviceInfo.X_RDKCENTRAL-COM_Syndication.WANsideSSH.Enable", "use":"absolute", "type":"dataModel"}], "JSONEncoding":{"ReportFormat":"NameValuePair", "ReportTimestamp":"None"}, "Version":"1"}}, {"versionHash":"3f7b4f1b", "value":{"ReportingInterval":600.000000, "Parameter":[{"type":"dataModel", "name":"Profile", "reference":"Device.DeviceInfo.X_RDK.RDKProfileName"}, {"logFile":"BootTime.log", "use":"absolute", "type":"grep", "marker":"bootuptime_Ethernet_split", "search":"boot_to_ETH_uptime"}, {"marker":"bootuptime_wifi_split", "search":"boot_to_WIFI_uptime", "logFile":"BootTime.log", "use":"absolute", "type":"grep"}, {"marker":"bootuptime_tr069_split", "search":"boot_to_tr069_uptime", "logFile":"BootTime.log", "use":"absolute", "type":"grep"}, {"search":"Waninit_complete", "logFile":"BootTime.log", "use":"absolute", "type":"grep", "marker":"waninit_split"}, {"search":"boot_to_WEBPA_READY_uptime", "logFile":"BootTime.log", "use":"absolute", "type":"grep", "marker":"bootuptime_webpa_split"}, {"type":"grep", "marker":"bootuptime_meshagent_split", "search":"boot_to_meshagent_uptime", "logFile":"BootTime.log", "use":"absolute"}, {"type":"dataModel", "name":"MAC", "reference":"Device.DeviceInfo.X_COMCAST-COM_CM_MAC"}, {"type":"dataModel", "reference":"Profile.Name"}, {"reference":"Profile.Version", "type":"dataModel"}, {"name":"UpTime", "reference":"Device.DeviceInfo.UpTime", "use":"absolute", "type":"dataModel"}, {"component":"test_and_diagnostics", "use":"absolute", "type":"event", "eventName":"SYS_ERROR_AdvSecurity_NotRunning"}, {"component":"test_and_diagnostics", "use":"count", "reportEmpty":false, "type":"event", "eventName":"SYS_SH_lighttpdCrash"}, {"type":"event", "name":"FirmwareStart_Time", "eventName":"Firmware upgrade start time :", "component":"test_and_diagnostics", "use":"count", "reportEmpty":false}], "HTTP":{"URL":"https://xconf.rdkcentral.com/xconf/telemetry_upload.php", "Compression":"None", "Method":"POST", "RequestURIParameter":[{"Name":"deviceId", "Reference":"Device.DeviceInfo.X_COMCAST-COM_CM_MAC"}, {"Name":"profileName", "Reference":"Profile.Name"}]}, "Description":"Report to check BootTime Parameters", "Version":"1", "TimeReference":"0001-01-01T00:00:00Z", "ActivationTimeOut":1800.000000, "JSONEncoding":{"ReportFormat":"NameValuePair", "ReportTimestamp":"None"}, "Protocol":"HTTP", "EncodingType":"JSON"}, "name":"RDKB-RPI-BootTime-Logs"}], "subdoc_name":"telemetry", "version":3672340881, "transaction_id":30695}
root@RaspberryPi-Gateway:/nvram/.t2reportprofiles#
|
7. Check the telemetry logs to confirm whether JSON report is generated properly or not (here, created 3 profiles in xconf server i,e
DM_DEVICEINFO_PROFILE , RDKB-RPI-BootTime-Logs,RDKB-RPI-SELFHEALPROFILE)
Code Block | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
40411-13:22:47.374561 [mod=T2, lvl=INFO] [tid=3697] Successfully enabled profile : DM_DEVICEINFO_PROFILE
240411-13:22:47.374647 [mod=T2, lvl=INFO] [tid=3697] T2ER isn't initialized or dispatch thread is already running
240411-13:22:47.376483 [mod=T2, lvl=INFO] [tid=3697] Starting TimeoutThread for profile : RDKB-RPI-SELFHEALPROFILE
240411-13:22:47.376784 [mod=T2, lvl=INFO] [tid=3697] T2ER isn't initialized or dispatch thread is already running
240411-13:22:47.376841 [mod=T2, lvl=INFO] [tid=3697] Successfully enabled profile : RDKB-RPI-SELFHEALPROFILE
240411-13:22:47.376894 [mod=T2, lvl=INFO] [tid=3697] T2ER isn't initialized or dispatch thread is already running
240411-13:22:47.377527 [mod=T2, lvl=INFO] [tid=3700] Waiting for 600 sec for next TIMEOUT for profile as reporting interval is taken - RDKB-RPI-SELFHEALPROFILE
240411-13:22:47.377646 [mod=T2, lvl=INFO] [tid=3700] Waiting for timeref or reporting interval for the profile - RDKB-RPI-SELFHEALPROFILE is started
240411-13:22:47.378491 [mod=T2, lvl=INFO] [tid=3697] Starting TimeoutThread for profile : RDKB-RPI-BootTime-Logs
240411-13:22:47.378733 [mod=T2, lvl=INFO] [tid=3697] T2ER isn't initialized or dispatch thread is already running
240411-13:22:47.378789 [mod=T2, lvl=INFO] [tid=3697] Successfully enabled profile : RDKB-RPI-BootTime-Logs
240411-13:22:47.378849 [mod=T2, lvl=INFO] [tid=3697] T2ER isn't initialized or dispatch thread is already running
240411-13:22:47.379017 [mod=T2, lvl=INFO] [tid=3701] Waiting for 600 sec for next TIMEOUT for profile as reporting interval is taken - RDKB-RPI-BootTime-Logs
240411-13:22:47.379153 [mod=T2, lvl=INFO] [tid=3701] Waiting for timeref or reporting interval for the profile - RDKB-RPI-BootTime-Logs is started
240411-13:22:47.379195 [mod=T2, lvl=INFO] [tid=3698] Waiting for 600 sec for next TIMEOUT for profile as reporting interval is taken - DM_DEVICEINFO_PROFILE
240411-13:22:47.379274 [mod=T2, lvl=INFO] [tid=3698] Waiting for timeref or reporting interval for the profile - DM_DEVICEINFO_PROFILE is started
240411-13:22:47.395270 [mod=T2, lvl=INFO] [tid=3697] rbuscore.c:2326 RBus Enabled
240411-13:22:50.562716 [mod=T2, lvl=INFO] [tid=2464] rbus.c:1014 Consumer=rbus.meshAgent.INBOX.3316 SUBSCRIBED to event=Telemetry.ReportProfiles.ProfilesUpdated
240411-13:22:50.562857 [mod=T2, lvl=INFO] [tid=2464] eventSubHandler called:
action=subscribe eventName=Telemetry.ReportProfiles.ProfilesUpdated
240424-07:52:36.000206 [mod=T2, lvl=INFO] [tid=18653] TIMEOUT for profile - RDKB-RPI-SELFHEALPROFILE
240424-07:52:36.000381 [mod=T2, lvl=INFO] [tid=18653] ReportProfiles_TimeoutCb ++in
240424-07:52:36.000411 [mod=T2, lvl=INFO] [tid=18654] TIMEOUT for profile - RDKB-RPI-BootTime-Logs
240424-07:52:36.000506 [mod=T2, lvl=INFO] [tid=18653] NotifyTimeout: profile RDKB-RPI-SELFHEALPROFILE is in Enabled state
240424-07:52:36.000523 [mod=T2, lvl=INFO] [tid=18654] ReportProfiles_TimeoutCb ++in
240424-07:52:36.000706 [mod=T2, lvl=INFO] [tid=18654] NotifyTimeout: profile RDKB-RPI-BootTime-Logs is in Enabled state
240424-07:52:36.000796 [mod=T2, lvl=INFO] [tid=28829] CollectAndReport ++in profileName : RDKB-RPI-SELFHEALPROFILE
240424-07:52:36.000737 [mod=T2, lvl=INFO] [tid=18653] ReportProfiles_TimeoutCb --out
240424-07:52:36.000989 [mod=T2, lvl=INFO] [tid=18653] Waiting for 600 sec for next TIMEOUT for profile as reporting interval is taken - RDKB-RPI-SELFHEALPROFILE
240424-07:52:36.001022 [mod=T2, lvl=INFO] [tid=18654] ReportProfiles_TimeoutCb --out
240424-07:52:36.001073 [mod=T2, lvl=INFO] [tid=28830] CollectAndReport ++in profileName : RDKB-RPI-BootTime-Logs
240424-07:52:36.001092 [mod=T2, lvl=INFO] [tid=18653] Waiting for timeref or reporting interval for the profile - RDKB-RPI-SELFHEALPROFILE is started
240424-07:52:36.001121 [mod=T2, lvl=INFO] [tid=18654] Waiting for 600 sec for next TIMEOUT for profile as reporting interval is taken - RDKB-RPI-BootTime-Logs
240424-07:52:36.001393 [mod=T2, lvl=INFO] [tid=18654] Waiting for timeref or reporting interval for the profile - RDKB-RPI-BootTime-Logs is started
240424-07:52:36.002013 [mod=T2, lvl=ERROR] [tid=28829] rbus.c:3660 Discover component names failed with error 6 and counts 1/0
240424-07:52:36.002104 [mod=T2, lvl=ERROR] [tid=28829] Failed to retrieve param : Device.DeviceInfo.X_RDK.RDKProfileName
240424-07:52:36.002504 [mod=T2, lvl=ERROR] [tid=28830] rbus.c:3660 Discover component names failed with error 6 and counts 1/0
240424-07:52:36.002607 [mod=T2, lvl=ERROR] [tid=28830] Failed to retrieve param : Device.DeviceInfo.X_RDK.RDKProfileName
240424-08:14:34.637693 [mod=T2, lvl=INFO] [tid=8850] cJSON Report = {"Report":[{"Profile.Name":"RDKB-RPI-BootTime-Logs"},{"Profile.Version":"1"},{"MAC":"D8:3A:DD:3C:5C:C3"},{"UpTime":"304"},{"bootuptime_Ethernet_split":"=20"},{"bootuptime_wifi_split":"=31"},{"bootuptime_tr069_split":"=31"},{"waninit_split":"=28"},{"bootuptime_webpa_split":"=35"},{"bootuptime_meshagent_split":"=37"}]}
240424-08:14:34.637829 [mod=T2, lvl=INFO] [tid=8850] Report Size = 318
240424-08:14:34.689539 [mod=T2, lvl=ERROR] [tid=8850] getParameterValue partner id failed
240424-08:14:34.803536 [mod=T2, lvl=INFO] [tid=8851] cJSON Report = {"Report":[{"Profile.Name":"RDKB-RPI-SELFHEALPROFILE"},{"Profile.Version":"1"},{"Time":"2024-04-24T08:14:33Z"},{"mac":"d8:3a:dd:3c:5c:c3"},{"erouterIpv4":"192.168.2.150"},{"PartnerId":"RDKM"},{"Version":"rdkb-generic-broadband-image_rdk-next_20240411132237"},{"MAC":"D8:3A:DD:3C:5C:C3"},{"UpTime":"304"},{"WAN_SSH_STATUS":"false"}]}
240424-08:14:34.803688 [mod=T2, lvl=INFO] [tid=8851] Report Size = 332
240424-08:14:35.173337 [mod=T2, lvl=INFO] [tid=8976] FILE:../../../../../../../../../rdk/components/generic/telemetry/source/bulkdata/reportprofiles.c FUNCTION:Process_Telemetry_WebConfigRequest LINE:863
240424-08:14:35.173513 [mod=T2, lvl=INFO] [tid=8976] FILE:../../../../../../../../../rdk/components/generic/telemetry/source/bulkdata/reportprofiles.c FUNCTION:Process_Telemetry_WebConfigRequest LINE:867 Execution in Handler, excuted
240424-08:14:35.173707 [mod=T2, lvl=INFO] [tid=8976] Number of report profiles in current configuration is 3
240424-08:14:35.173827 [mod=T2, lvl=INFO] [tid=8976] rbuscore.c:2326 RBus Enabled
240424-08:14:35.173945 [mod=T2, lvl=INFO] [tid=8976] DM_DEVICEINFO_PROFILE is found
240424-08:14:35.173996 [mod=T2, lvl=INFO] [tid=8976] RDKB-RPI-SELFHEALPROFILE is found
240424-08:14:35.174067 [mod=T2, lvl=INFO] [tid=8976] RDKB-RPI-BootTime-Logs is found
240424-08:14:35.174124 [mod=T2, lvl=INFO] [tid=8976] rbuscore.c:2326 RBus Enabled
240424-08:14:35.174388 [mod=T2, lvl=INFO] [tid=8976] Profile DM_DEVICEINFO_PROFILE with cf3d1060 hash already exist
240424-08:14:35.174463 [mod=T2, lvl=INFO] [tid=8976] Profile RDKB-RPI-SELFHEALPROFILE with de899a23 hash already exist
240424-08:14:35.174528 [mod=T2, lvl=INFO] [tid=8976] Profile RDKB-RPI-BootTime-Logs with 3f7b4f1b hash already exist
240424-08:14:35.174675 [mod=T2, lvl=INFO] [tid=8976] rbuscore.c:2326 RBus Enabled
240424-08:14:35.655881 [mod=T2, lvl=INFO] [tid=8850] The return status from the child with pid 8911 is CurlStatus : 1
240424-08:14:35.655998 [mod=T2, lvl=INFO] [tid=8850] The return status from the child with pid 8911 SetopCode: No error; ResponseCode : No error; HTTP_CODE : 200; Line Number : 335
240424-08:14:35.656040 [mod=T2, lvl=INFO] [tid=8850] Report Sent Successfully over HTTP : 200
240424-08:14:35.656103 [mod=T2, lvl=INFO] [tid=8850] Elapsed Time for : RDKB-RPI-BootTime-Logs = 1.142592536 (Sec.NanoSec)
240424-08:14:35.656157 [mod=T2, lvl=INFO] [tid=8850] CollectAndReport --out
240424-08:14:35.825062 [mod=T2, lvl=ERROR] [tid=8851] getParameterValue partner id failed
240424-08:14:35.833962 [mod=T2, lvl=INFO] [tid=8849] cJSON Report = {"Report":[{"CmMacT1":"D8:3A:DD:3C:5C:C3"},{"ClearResetCount":"false"},{"Desc":"Raspberry Pi 3 device"},{"Device.DeviceInfo.FactoryResetCount":"1"},{"MemFree":"133"},{"MemUsed":"272"},{"MemStatFree":"3277"},{"MemStatTotal":"3513"},{"MemStatUsed":"148"},{"FrMemThrshld":"0"},{"CpuUsage":"6"},{"Uptime":"305"}]}
240424-08:14:35.834136 [mod=T2, lvl=INFO] [tid=8849] Report Size = 309
240424-08:14:35.860502 [mod=T2, lvl=ERROR] [tid=8849] getParameterValue partner id failed
240424-08:14:36.807264 [mod=T2, lvl=INFO] [tid=8849] The return status from the child with pid 9024 is CurlStatus : 1
240424-08:14:36.807380 [mod=T2, lvl=INFO] [tid=8849] The return status from the child with pid 9024 SetopCode: No error; ResponseCode : No error; HTTP_CODE : 200; Line Number : 335
240424-08:14:36.807423 [mod=T2, lvl=INFO] [tid=8849] Report Sent Successfully over HTTP : 200
240424-08:14:36.807477 [mod=T2, lvl=INFO] [tid=8849] Elapsed Time for : DM_DEVICEINFO_PROFILE = 2.295589017 (Sec.NanoSec)
240424-08:14:36.807530 [mod=T2, lvl=INFO] [tid=8849] CollectAndReport --out
240424-08:14:36.830727 [mod=T2, lvl=INFO] [tid=8851] The return status from the child with pid 9015 is CurlStatus : 1
240424-08:14:36.830838 [mod=T2, lvl=INFO] [tid=8851] The return status from the child with pid 9015 SetopCode: No error; ResponseCode : No error; HTTP_CODE : 200; Line Number : 335
240424-08:14:36.830885 [mod=T2, lvl=INFO] [tid=8851] Report Sent Successfully over HTTP : 200
240424-08:14:36.830943 [mod=T2, lvl=INFO] [tid=8851] Elapsed Time for : RDKB-RPI-SELFHEALPROFILE = 2.315808869 (Sec.NanoSec)
|
Jira | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
Jira | ||||||||||
|
...
...