...

Hardware requirement

...

•    Raspberry Pi 1 3 Model B+
•    Raspberry Pi Touchscreen LCD Display (7-inch)
•    MicroSDHC Class 10 98 MB/s (Sandisk ultra)
•    Power adapter for raspberrypi
•    Normal headset  for connecting to raspberrypi 3.5mm jack
  
  
  Note: Raspberry Pi Touchscreen LCD Display (7-inch) can be ordered from https://www.amazon.in/Raspberry-Pi-Touchscreen-Display-7-inch/dp/B0153R2A9   

...

•  This LCD will connects to the Raspberry Pi board using a ribbon cable connected to the DSI port as shown below. 
  
•  LCD display will be powered using connected wires as shown below.  From 7-inch lcd power 5v pin (pin1) needs to be connected to raspberrypi 5v (Pin2) and Gnd pin(pin5) needs to be connected to raspberrypi gnd pin (pin6). 
  
  
•  Connections to GPIO pins and DSI port.
  
  
• Headset connection to RPI 3.5mm jack for audio
  

...