...

Release History

Feature List

...

Components & their availability

Below are the components/code used with the RDK Alexa solution and the origin/owner for distribution.

• Components hosted in CMF or github can be accessed part of the release
• Operators/vendors should contact amazon POC to get the artifacts marked as "Distributed by Amazon". 

Skill Overview

Video Skill

Please refer to below page on integrating the Alexa Video Skill Kit with RDK

Integrating Alexa Video Skill Kit with RDK

Build instructions

The build instructions are mentioned by taking RaspberryPi as an example but should be almost similar for other platforms.

Getting the source code

1. Initialize and download the code base
 - Example for RaspberryPi:
 (we can use rdkv.xml to build with external source method or rdkv-nosrc.xml to build without externalsrc)
 $ repo init -u https://code.rdkcentral.com/r/manifests -m rdkv-nosrc.xml -b rdk-next
 $ repo sync

2. Download the meta-rdk-voice layer in project root
 $ git clone https://code.rdkcentral.com/r/rdk/components/generic/rdk-oe/meta-rdk-voice

3. Enable the below DISTRO feature to build AVS plugin
 $ vi meta-rdk-voice/conf/layer.conf
 - enable the below commented line
 #DISTRO_FEATURES_append = " alexa-plugin"

4. For the external source builds (such as some Broadcom platforms) add below line in manifest/auto.conf
 - In <Manifest>.xml
   <project name="components/generic/avs/alexa_skill_mapper" revision="rdk-next"/>
 - In auto.conf (where brcmexternalsrc is enabled)
   BRCMEXTERNALSRC_pn-skillmapper += "rdk/components/generic/avs/alexa_skill_mapper"
   SRCPV_pn-skillmapper = "${BRCMEXTERNAL-SRCPV-CMF}"
 $ repo sync

Configuration for voice input from MIC

Mic input can be enable using below options , it will automatically add PORTAUDIO library as dependency.

KWD detector module will be required for MIC attached devices in order to wake-up Alexa & current implementation is only verified with pryonlite KWD detector.

4. if wanted to use MIC based implementation
 $ vi meta-rdk-voice/conf/layer.conf
 - enable the below commented line
 #DISTRO_FEATURES_append = " alexa_ffv"

Enable Keyword detector support

Keyword detector (KWD) support enables the device to wake-up & listen to input after receiving the hot word  "Alexa". It is used with devices that has on-board Microphone

This option need to be enabled along with "alexa_ffv" DISTRO for MIC based voice input

1. To use pryon lite KWD engine for devices with MIC input
 Note: Source code need to be obtained from amazon separately
2. Set the KWD support flag to "ON"
  $ vi meta-rdk-voice/recipes-wpe/wpeframework/include/avs.inc
    AVS_KWD_SUPPORT ?= "ON"
3. include the KWD detector recipe to build.
 - enable the commented line 
 #PREFERRED_PROVIDER_virtual/alexa-kwd-detector = "pryonlite"
4. Create a bbappend file in platform layer and provide artifact location
e.g. 
 $ vi meta-rdk-oem-<OEMNAME>/meta-<MACHINE>/recipes-avs/pryonlite/pryonlite_2.3.0.bbappend
   SRC_URI  = "file://pryon_lite_2.3.0-metrological-2019.12.23.2344.zip"

Kernel configurations to simulate FFV with an USB microphone

# If FFV profile is enabled (DISTRO_FEATURES_append = " alexa_ffv") & we want to simulate audio input
  using a USB mic the below kernel configuration need to be enabled for the platforms:

CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_USB_AUDIO=m

# After enabling the above kernel configs, recompile the kernel so that the support for USB audio will be enabled

Smart Screen build configuration

Enable Alexa Smart Screen support

Smart screen support will build the components that provide visual experience along with voice response.

$ vi meta-rdk-voice/conf/layer.conf
 - enable the below commented DISTRO_FEATURE
  #DISTRO_FEATURES_append = " alexa_smart_screen"

Enable Voice chrome

Voice chrome is a feature that is used along with Alexa smart screen. it provides a animated visual element to notify different Alexa states such as Listening, Thinking or Speaking. When the system is IDLE the voice chrome UI element is cleared from screen. 

1. Enable DISTRO options
$ vi meta-rdk-voice/conf/layer.conf
 - enable the below commented DISTRO_FEATURE
  #DISTRO_FEATURES_append = " voice-chrome"
2. Provide artifact location
 - Add an .bbappend file for alexa-ss-sdk and over-write the SRC_URI
e.g.
 $ vi meta-rdk-oem-OEMNAME/meta-<MACHINE>/recipes-avs/alexa-smart-screen/alexa-ss-sdk_git.bbappend
   SRC_URI_remove = "https://operator-artifact-url.com/location/SmartScreenSDKVoiceChrome-2.1.tar;name=voicechrome;subdir=voicechrome"
   SRC_URI += "file://SmartScreenSDKVoiceChrome-2.1.tar;name=voicechrome;subdir=voicechrome"

Build the image

Build the image target
 - Example for RaspberryPi
 $ source meta-cmf-raspberrypi/setup-environment
 ### select meta-cmf-raspberrypi/conf/machine/raspberrypi-rdk-thunder-mc.conf ###
 $ bitbake rdk-generic-mediaclient-image

How to run the service

Activate AVS Plugin

1.  Go to the controller web UI by typing http://<Device-IP> in a browser
2. Select the controller option from left pane menu
3. toggle the AVS option to activate the plugin

Customization

Mapping to amazon developer account

You should already have a developer account, Please refer the wiki link AVS Developer Account and Skill Creation Guidelines for RDK for creating a developer account.

Modify below section to map with relevant developer account.

1. Login to the device
 $ ssh root@<RDKV-Client-IP>

2. Edit the Configuration file
 $ cd /usr/share/WPEFramework/AVS
 $ vi AlexaClientSDKConfig.json
     "deviceInfo":{
        // Unique device serial number. e.g. 123456
        "deviceSerialNumber":"<SERIAL_NO>",
        // The Client ID of the Product from developer.amazon.com
        "clientId":"<CLIENT_ID>",
        // Product ID from developer.amazon.com
        "productId":"<PRODUCT_ID>",
        // The name of the device manufacturer.
        "manufacturerName": "<MANUFACTURER_NAME>",

Build instructions

Alexa related recipes are bundled inside meta-rdk-voice/recipes-avs and contains below build targets

...

1. Initialize and download the code base
 - Example for RaspberryPi:
 $ repo init -u https://code.rdkcentral.com/r/manifests -m rdkv-nosrc.xml -b thunder-next
 $ repo sync

2. Download the meta-rdk-voice layer in project root
 $ git clone https://code.rdkcentral.com/r/components/generic/rdk-oe/meta-rdk-voice

3. Add to BBLAYERS
 $ vi meta-rdk/conf/bblayers.conf.sample
 BBLAYERS += "${@'${RDKROOT}/meta-rdk-voice' if os.path.isfile('${RDKROOT}/meta-rdk-voice/conf/layer.conf') else ''}"

4. Optionally if wanted to use MIC based implementation (Ignore if using BLE voice remote)
 $ vi meta-rdk-voice/conf/layer.conf
 - enable the below commented line
 #DISTRO_FEATURES_append = " alexa_ffv"

5. Optionally For the external source builds (such as some Broadcom platforms) add below line in manifest/auto.conf
 - In <Manifest>.xml
   <project name="components/generic/avs/alexa_skill_mapper" revision="rdk-next"/>
 - In auto.conf (where brcmexternalsrc is enabled)
   BRCMEXTERNALSRC_pn-wpe-alexa += "components/generic/avs/alexa_skill_mapper:git/VoiceToApps"
   SRCPV_pn-wpe-alexa = "${BRCMEXTERNAL-SRCPV-CMF}"
 $ repo sync
6 .Build the image target
 - Example for RaspberryPi
 $ source meta-cmf-raspberrypi/setup-environment
 ### select meta-cmf-raspberrypi/conf/machine/raspberrypi-rdk-hybrid-thunder.conf ###
 $ bitbake rdk-generic-hybrid-thunder-image

Customization

Mapping to amazon developer account

Please refer the wiki link AVS Developer Account and Skill Creation Guidelines for RDK for creating a developer account.

Modify below section to map with relevant developer account.

1. Login to the device
 $ ssh root@<RDKV-Client-IP>

2. Edit the Configuration file
 $ cd /home/root
 $ vi Alexa_SDK/Integration/AlexaClientSDKConfig.json
     "deviceInfo":{
        // Unique The description of the device serialwhich number. e.g. 123456
        "deviceSerialNumber":"<SERIAL_NO>",should contain the manufacturer name or how the device is connected.
        // The Client ID of the Product from developer.amazon.com
        "clientId":"<CLIENT_ID>",
        // Product ID from developer.amazon.com
        "productId":"<PRODUCT_ID>",
        // The name of the device manufacturer.
        "manufacturerName": "<MANUFACTURER_NAME>",
        // The description of the device which should contain the manufacturer name or how the device is connected.
        "description": "<DESCRIPTION"
    },

LED Support

Prerequisite : Alexa Client uses IOConnector plugin to set different LED notifications, so IOConnector need to be enabled for the platform

https://github.com/rdkcentral/ThunderNanoServices/tree/master/IOConnector

$ cd /home/root
$ vi Alexa_SDK/Integration/AlexaCurl.json
Set below GPIO to appropriate value
   "PinOne":"9",
   "PinTwo":"10",
   "PinThree":"11"

Example: For RaspberryPi we can use the Traffic light LED where GPIO PIN 9, 10, 11 represents the Red, Yellow & Green LEDS 

Alexa user guide

Introduction

This Feature consists two mode "General Mode" and "Skill Mode",

• in the General Mode you ask general quires (ex: time , weather ,news)
• in the Skill Mode you can launch applications ,navigate and other functionality.

One can switch from the "General Mode" to "Skill Mode" by using steps mentioned in the section "skill invocation enable" and you can switch back to "General Mode" following the steps in the section "skill invocation disable".

Note: By default when device is booted it will be in the general mode

...

"description": "<DESCRIPTION>"
    },

Front Panel LED Notifications

Prerequisite : Alexa Client uses IOConnector plugin to set different LED notifications, so IOConnector need to be enabled for the platform

https://github.com/rdkcentral/ThunderNanoServices/tree/master/IOConnector

$ cd /home/root
$ vi Alexa_SDK/Integration/AlexaCurl.json
Set below GPIO to appropriate value
   "PinOne":"9",
   "PinTwo":"10",
   "PinThree":"11"

Example: For RaspberryPi we can use the Traffic light LED where GPIO PIN 9, 10, 11 represents the Red, Yellow & Green LEDS 

Alexa usage guide

Introduction

How To give voice Input:

1. Using the Tech4Home BLE Remote - Press & hold the mic button → provide the voice input → release the button. (BT voice support is not available with RDK service codebase) 
2. Using the on-board (or USB) microphone - Wake-up the system with keyword "Alexa" → provide the voice input.

This Feature can be divided as : General skills , Custom Skills Or Video Skill,

• in General Mode you ask general quires (ex: time , weather ,news)
• in Custom Skill Mode you can launch applications ,navigate and other functionality.

One can switch from the "General Mode" to "Skill Mode" by using steps mentioned in the section "skill invocation enable" and you can switch back to "General Mode" following the steps in the section "skill invocation disable".

Note: By default when device is booted it will be in the general mode

First time authorization

On first time launch, we need to authorize the device with a amazon account. This steps will not be required for subsequent application launch.

We can check the authorization code using below command:

$ tail -f /opt/logs/wpeframework.log

We will be able to see a message similar to below format. Note the code that appears in console window, this will be required while authorizing with developer account.

##################################
#       NOT YET AUTHORIZED       #
##################################
#       To authorize, browse to: 'https://amazon.com/us/code' and enter the code: EXEA99
###############################################################
#       Checking for authorization (1)...       #
################################################# 

1. Open "https://amazon.com/us/code" in a browser
2. Login with the amazon developer account credential and provide the code that was displayed on the device console (one time only)

 Image Added

Note: If there is a prompt for OTP at this stage, Get it from linked phone number.

1. After the authorization below log is displayed on the console

########################################
#       Alexa is currently idle!       #
########################################

At this stage, we can provide voice commands to Alexa.

Alexa Smart Screen

The Alexa Smart Screen SDK extends the AVS Device SDK to support visual display for screen-based Alexa Built-in products. It complement Alexa voice responses with rich visual experiences.

The Alexa Smart Screen implementation for RDK involves below components:

• The Alexa Smart Screen SDK
• A GUI web app that handles presentation of Alexa visual responses
• skill mapper which controls the overlay

Below are few screen shots which gives an idea about the smart screen integration for different scenarios.

a) Weather Information:

• Smart screen overlay shown over the main UI
• Weather information displayed as a visual element inside overlay
• Voice chrome bar visible at bottom of the overlay indicating Alexa is in SPEAKING state.

Image Added

b) Music Playback

• Smart screen overlay shown over the main UI
• Audio player interface occupying the full space of overlay window.

Image Added

First time authorization

On first time launch, we need to authorize the device with a amazon account. This steps will not be required for subsequent application launch.

We can check the authorization code using below command:

$ systemctl status alexa

We will be able to see a message similar to below format. Note the code that appears in console window, this will be required while authorizing with developer account.

##################################
#       NOT YET AUTHORIZED       #
##################################
#       To authorize, browse to: 'https://amazon.com/us/code' and enter the code: EXEA99
###############################################################
#       Checking for authorization (1)...       #
################################################# 

1. Open "https://amazon.com/us/code" in a browser
2. Login with the amazon developer account credential and provide the code that was displayed on the device console (one time only)

 Image Removed

Note: If there is a prompt for OTP at this stage, Get it from linked phone number.

1. After the authorization below log is displayed on the console

########################################
#       Alexa is currently idle!       #
########################################

At this stage, we can provide voice commands to alexa.

Example Usage

a) General Usage
ex:  1:  1) User: what is the the time?
          Alexa: respond with current time
      2) User : what is the the time?weather outside ?
          Alexa: it will ask for you location
          User: Provides the Location
          Alexa: respond with current time
      2) User : what is the weather outside ?the climate in the current location.

          In case smart screen support enabled, the overlay will render the weather tiles.

b) Using video skill launch application

ex: 1) Launching YouTube

          Alexa: it will ask for you location User: Alexa, Launch YouTube

          User: if give the Location  Alexa: Getting Youtube from Accelerator

          Alexa: respond with the climate in the current location.b) Skill Invocation Enable

       User: My Device
       Alexa: respond with "how can i help you"
       User : invocation enable
       Alexa : respond with "invocation enabled"

...

Output: Youtube is launched on the device

c) Using the custom skill to Launching Metro Applications

Note: Need to mention the skill name for invocation (skill name is My Device in below examples)

ex :  1) launching RadioLine Application

          User: tell my device to launch radioline
          Alexa : respond with "radioline" by launching the application

          User : "metro" or "main UI"
          Alexa: speaks back "main UI" & navigation moves back to metro UI main screen

       2) launching Wall Street Journal

       (note :It is done when "skill mode" is already enabled & we want to switch back to "general mode" )

       User: invocation disable
       Alexa: respond with "invocation disabled"

d) Launching Metro Applications

ex :  1) launching RadioLine Application

          User: radioline : tell my device to launch WallStreetJournal
          Alexa : respond with "radiolineWallStreetJournal" by launching the application

          User  User : "metro" or "main UI"
          Alexa: speaks back "main UI" & navigation moves back to metro UI main screen

       2) launching Wall Street Journal Application

          User: WallStreetJournal
          Alexa : respond with "WallStreetJournal" by launching the application

         User : "metro" or "main UI"
         Alexa: speaks back "main UI" & navigation moves back to metro UI main screen

Architecture & Flow diagram

Image Removed

Advantages

• Configurable to support different device profiles (FFV, Push-to-talk).
• Most of the new skills can be dynamically added without modifying the client code.

Scope of improvement

UI"
         Alexa: speaks back "main UI" & navigation moves back to metro UI main screen

Architecture & Flow diagram

AVS Integration with Video Skill & RDK Services

Image Added

AVS Integration with custom skills

Image Added

Current Limitations

Roadmap