RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Children Display |
---|
Table of Contents |
---|
Telemetry is the automatic recording and transmission of data from remote or inaccessible sources to an IT system in a different location for monitoring and analysis.
1. Xconf Server
2. Rpi Board with RDK Broadband image
3. Tftp Server
draw.io Diagram | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Rpi board will connect to Xconf Server to get the device configuration information, telemetry profile information and log upload repository (ip address of tftp server). It will search for the markers (contents mentioned in the permanent profile) in the mentioned log file. If it is found in the log file, it will process those information and create a text file and upload that file in the tftp server. This way all the critical data related to device health will be available on timely basis in the tftp server for further analysis.
1. Login to Xconf Server and go to DCM menu item and click on “Formulas” sub menu
...
19. Verify the created Targeting rule displayed on the Targeting rule page
Below steps needed after flashing for the first time:
1. Flash the Telemetry image and load it on RPi board
2. Configure the CLOUDURL parameter and Log Server/Http Server parameter by providing IP address of XConf server in the two mentioned files /etc/include.properties and /etc/dcm.properties respectively.
For ex. In include.properties file:
CLOUDURL=http://35.155.171.121:9092/xconf/swu/stb?eStbMac=
In dcm.properties file:
DCM_LOG_SERVER_URL=http://35.155.171.121:9092/loguploader/getSettings
DCM_HTTP_SERVER_URL=http://35.155.171.121/xconf/telemetry_upload.php
DCM_LA_SERVER_URL=http://35.155.171.121/xconf/logupload.php
3. After board boot up, disable log rotation by using the command:
Code Block | ||||
---|---|---|---|---|
| ||||
systemctl disable rdkbLogMonitor |
34. Verify the image version: cat /version.txt
45. Perform reboot: reboot -f
...
1. Verify tftp server is running and XConf DCM and Telemetry Permanent profile is configured properly (see Telemetry User manual for XConf side configuration for Telemetry)
2. After reboot, verify Telemetry log: cat /rdklogs/logs/telemetry.log
3. Verify that rtl_json.txt and zipped log files for all other logs displayed in tftp server
4. Verify that rtl_json file and zipped log files for all other logs displayed in AWS(http) server(http://3435.219155.243171.214:81121/xconf/upload)
...