Page History

ifconfig brlan0 10.0.0.215 netmask 255.255.255.0 up

iw dev wifi0.1 info

iw dev wifi0.1.sta<i> info
iw dev wifi0.1.sta<i> station dump ## This command gives information on connected client ie Extender2.

ifconfig brlan0 10.0.0.210 netmask 255.255.255.0 up

ping 10.0.0.1 -c 5

rm /usr/bin/dnsmasq

route del default gw

{
	"AL_MAC_ADDR":	"00:0c:43:26:60:2a",
	"Colocated_mode":	0,
	"Backhaul_SSID":	"mesh_backhaul",
	"Backhaul_KeyPassphrase":	"test-backhaul",
    "sta_4addr_mode_enabled": true 
}

 {
    "PhyList": [
        {
            "Index": 0,
            "RadioList": [
                 {
                    "Index": 2,
                    "RadioName": "wifi2",
                    "InterfaceList": [
                        {
                            "InterfaceName": "wifi2",
                            "Bridge": "brlan0",
                            "vlanId": 0,
                            "vapIndex": 3,
                            "vapName": "private_ssid_6g"
                        }
                    ]
                },
                {
                    "Index": 1,
                    "RadioName": "wifi1",
                    "InterfaceList": [
                        {
                            "InterfaceName": "wifi1.1",
                            "Bridge": "brlan0",
                            "vlanId": 0,
                            "vapIndex": 2,
                            "vapName": "mesh_sta_5g"
                        },
                        {
                            "InterfaceName": "wifi1",
                            "Bridge": "brlan0",
                            "vlanId": 0,
                            "vapIndex": 1,
                            "vapName": "private_ssid_5g"
                        }
                        
                    ]
                },
                {
                    "Index": 0,
                    "RadioName": "wifi0",
                    "InterfaceList": [
                        {
                            "InterfaceName": "wifi0",
                            "Bridge": "brlan0",
                            "vlanId": 0,
                            "vapIndex": 0,
                            "vapName": "private_ssid_2g"
                        }
                    ]
                }
            ]
        }
    ]
}

#!/bin/sh
sleep 5

iw phy phy0 interface add wifi0 type __ap
iw phy phy0 interface add wifi1 type __ap
iw phy phy0 interface add wifi2 type __ap
iw phy phy0 interface add wifi1.1 type __ap


#Obtain the wifi0 mac address
wifi_mac="$(cat /sys/class/ieee80211/phy0/macaddress)"
#Strip the : and increment mac by 1 to get wifi1 macaddress
mac=$(echo $wifi_mac | tr -d ':')
mac_incr=$((0x$mac + 24))
wifi0_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
#Increment again by 1 to get wifi2 address
mac_incr=$(($mac_incr + 1))
wifi1_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
mac_incr=$(($mac_incr + 1))
wifi1_1_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
mac_incr=$(($mac_incr + 1))
wifi2_mac=$(printf "%012x" $mac_incr | sed 's/../&:/g;s/:$//')
#print the mac address
echo $wifi0_mac
echo $wifi1_mac
echo $wifi2_mac

#Update the mac address using ip link command
ifconfig wifi0 down
ifconfig wifi1 down
ifconfig wifi1.1 down
ifconfig wifi2 down
ip link set dev wifi0 address $wifi0_mac
ip link set dev wifi1 address $wifi1_mac
ip link set dev wifi1.1 address $wifi1_1_mac
ip link set dev wifi2 address $wifi2_mac
ifconfig wifi0 up
ifconfig wifi1 up
ifconfig wifi1.1 up
ifconfig wifi2 up

exit 0

systemctl disable ieee1905_em_ctrl.service
systemctl disable em_ctrl

[Unit]
Description=ieee1905 EasyMesh Remote Agent service
After=onewifi.service
  
[Service]
Type=forking
WorkingDirectory=/usr/ccsp/EasyMesh
ExecStartPre=/bin/sh -c '/usr/ccsp/EasyMesh/setup_ext_pre.sh'
ExecStartPre=/bin/sh -c 'if [ ! -e "/sys/class/net/eth1_virt_peer/address" ]; then `/usr/ccsp/EasyMesh/setup_veth_for_em.sh brlan0 eth1 false`;fi'
ExecStartPre=/bin/sh -c 'sleep 5'
ExecStart=/bin/sh -c '/usr/bin/ieee1905 -f ieee1905::al_sap=trace,ieee1905::cmdu_handler=trace,ieee1905::cmdu_proxy=trace,ieee1905::cmdu_observer=trace -i eth1_virt_peer >> /tmp/ieee1905_agent_log.txt &'
Restart=always
  
  
[Install]
WantedBy=multi-user.target

[Unit]
Description=EasyMesh Agent service
After=onewifi.service ieee1905_em_agent.service
  
[Service]
Type=forking
WorkingDirectory=/usr/ccsp/EasyMesh
ExecStartPre=/bin/sh -c 'sleep 30'
ExecStartPre=/bin/sh -c '/usr/ccsp/EasyMesh/setup_ext_pre.sh'
ExecStart=/bin/sh -c '/usr/bin/onewifi_em_agent >> /tmp/em_agent.log &'
Restart=always
  
  
[Install]
WantedBy=multi-user.target

#!/bin/sh
  
#Ensure onewifi is up and running
while [ ! -e /tmp/wifi_initialized ] && [ ! -e /tmp/wifi_dml_complete ] ;
do 
   sleep 1;
done
  
#Ensure backhaul connectivity is established
al_mac_addr=`cat /nvram/EasymeshCfg.json | grep AL_MAC_ADDR  | cut -d '"' -f4`
channel_exists=`iw dev | grep $al_mac_addr  -A 4 | grep channel | wc -l`
ssid_exists=`iw dev | grep $al_mac_addr -A 4 | grep ssid | wc -l`
  
while [ "$channel_exists" != 1 ] && [ "$ssid_exists" != 1 ] ;
do
  sleep 1;
  channel_exists=`iw dev | grep $al_mac_addr  -A 4 | grep channel | wc -l`
  ssid_exists=`iw dev | grep $al_mac_addr -A 4 | grep ssid | wc -l`
done

iw dev wifi1.1 info

iw dev wifi1.1.sta<i> info
iw dev wifi1.1.sta<i> station dump ## This command gives information on connected client ie Extender2.

ifconfig brlan0 10.0.0.205 netmask 255.255.255.0 up