...

TCP - Method used FTP server 

1)In Your client machine(LAN)you have to run FTP server

2)In router configure Trigger port 443:443 and Target port 21:21

3)External network(WAN) try to access ftp server of client machine using router uplink ip address(Goto terminal enter ftp -p 192.168.2.30)   ftp port 21 will not start util you trigger any packet flow on port 443 in your client machine

4)In your client machine(LAN)run https service(In browser https://www.google.com)

5)Goto to your external network(WAN),try access ftp server of client machine(ftp -p 192.168.2.30).incoming traffic on ports 21 after seeing an outgoing packet on port 443

UDP - The Netcat (nc) command is a command-line utility for reading and writing data between two computer networks. The communication happens using either TCP or UDP

1)In router configure Trigger port 443:443 and Target port 2399:2399
2)In Your client machine(LAN)you have to run : nc -u -l 2399
3)From external WAN machine run nc -u 192.168.2.30 2399 (192.168.2.30 - router uplink ip address) 
4)In your client machine(LAN)run https service(In browser https://www.google.com)
5)Goto to your external network(WAN), access server of client machine(Try sending some packets to wan client). Able to see incoming traffic on ports 2399 after seeing an outgoing packet on port 443

...

1)In router configure Trigger port 443:443 and Target port 5001:5001
2)In Your client machine (LAN)you have to run:  iperf -s -B 10.0.0.106 -i 1 -p 5001 (10.0.0.106 - LAN IP)
3)From external WAN machine run  iperf -c 192.168.161.216 -p 5001 -i  1 -t 60 -B 192.168.160.173 (192.168.161.216 - router uplink ip address, 192.168.160.173 - WAN PC Ip) 
4)In your client machine (LAN)run https service (In browser https://www.google.com)
5)In the WAN PC you will be able to see the traffic and, in the LAN PC, you will be able to see the traffic summery once you stopped the step 3.

By default Port triggering will be disabled in the RPI .We can enable using two methods .One is through DM and other way is through UI

...

In Your client machine(LAN)you have to run : nc -u -l 2399 
From external WAN machine run nc -u 192.168.2.30 2399, while client machine(LAN)run https service(In browser https://www.google.com)

Iperf

DM : 

dmcli eRT addtable Device.NAT.X_CISCO_COM_PortTriggers.Trigger.
dmcli eRT setv Device.NAT.X_CISCO_COM_PortTriggers.Trigger.1.Description string iperf
dmcli eRT setv Device.NAT.X_CISCO_COM_PortTriggers.Trigger.1.TriggerProtocol string TCP
dmcli eRT setv Device.NAT.X_CISCO_COM_PortTriggers.Trigger.1.TriggerPortStart uint 443
dmcli eRT setv Device.NAT.X_CISCO_COM_PortTriggers.Trigger.1.TriggerPortEnd uint 443
dmcli eRT setv Device.NAT.X_CISCO_COM_PortTriggers.Trigger.1.ForwardPortStart uint 5001 
dmcli eRT setv Device.NAT.X_CISCO_COM_PortTriggers.Trigger.1.ForwardPortEnd uint 5001

WEB GUI: 

Step 1: Login to webui, from navigation -> Advanced ->Port Triggering. Click on Add Port Trigger (Configure Trigger port as 443:443 and Target port as 5001:5001)

Image Added

Step2: In Your client machine (LAN)you have to run: iperf -s -B 10.0.0.106 -i 1 -p 5001 (10.0.0.106 - LAN IP)

Image Added

Step3: In the WAN machine run  iperf -c 192.168.161.216 -p 5001 -i  1 -t 60 -B 192.168.160.173 (192.168.161.216 - router uplink ip address, 192.168.160.173 - WAN PC Ip) same time in the client machine (LAN)run https service (In browser https://www.google.com)

Image Added

Supported devices

RaspberryPi 

...