RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Children Display |
---|
Table of Contents |
---|
...
...
This Page is under Development
Briefly describe in general terms the system/application and the purpose for which it is intended, written in non-technical terminology. Consider including a high-level architecture diagram for the system. The description should include, but is not limited to, the following:
...
...
...
On the WebPA Server and Client side ensure the following services.
1. Talaria: This service maintains the secure websocket connections from the device and passes the messages from or to the deviceTalaria Service connects with the client and retrieves the data according to the user request.
2. Scytale:This accepts the inbound requests and delivers the messages to the Talaria machines that could be hosting the device connection This service acts as a communication bridge between Talaria and Tr1d1um which is highly helpful in transmitting the data.
3. Tr1d1um: The Webpa micro-service that encode TR-181 requestsThis receives the requests from the external resources, encryts it and send it Scytale.
On client-side
4. Parodus: Parodus is the light weight client that reaches out to the xmidt cloud to establish the connection from CPE devices.Additional
Additional Services:
5. Petasos : Petasos helps reduce the load on the Talaria machines by calculating which specific Talaria a device should connect to & redirecting the incoming request.
...
2. Auth token: The auth token will be used when configuring different webPA components as well while performing GET/SET requests to the CPE from a 3rd party application.
3. Make ServerURL changes in the script file of client service, /lib/rdk/parodus_start.sh
4. Run the below commands for effective communication
rm -rf /tmp/parodusCmd.cmd
systemctl restart parodus
Once the Turris-Omnia set-up is active with client services, communication between turris and WebPA server can be established.
...
The following are the major components/services involved in the fetching the data,
The validation artifacts that are essential to ensure the functionality,
CPE Device mac address
...
The data from the client device can be fetched through the curl commands,
curl -H 'Authorization:Basic dXNlcjp3ZWJwYQo=' -i 'http://192.168.2.75:9003/api/v2/device/mac:d858d700a5d6/config?names=Device.Users.User.3.X_CISCO_COM_Password'
Response Message:
{"parameters":[{"name":"Device.Users.User.3.X_CISCO_COM_Password","value":"b1be9cacbfaf0d9d1b633915e8ed0259753057a0a10853a414947d6c27d074c1","dataType":0,"parameterCount":1,"message":"Success"}],"statusCode":200}
curl -X PATCH http://192.168.2.75:9003/api/v2/device/mac:d858d700a5d6/config -d '{"parameters": [{"dataType": 0,"name":"Device.Users.User.1.X_CISCO_COM_Password","value":"Testing123"}]}' -H 'Authorization:Basic dXNlcjp3ZWJwYQo='
...
Console Output Screenshot:
Generic Data Parameters: Get Only
i. Device.DeviceInfo.Manufacturer
ii. Device.DeviceInfo.ManufacturerOUI
iii. Device.DeviceInfo.ModelName
iv. Device.DeviceInfo.SerialNumber
v. Device.DeviceInfo.HardwareVersion
vi. Device.DeviceInfo.SoftwareVersion
vii. Device.DeviceInfo.UpTime
viii. Device.DeviceInfo.MemoryStatus.Total
ix. Device.DeviceInfo.MemoryStatus.Free
x. Device.DeviceInfo.ProcessStatus.CPUUsage
xi. Device.Hosts.X_CISCO_COM_ConnectedDeviceNumber
Set/Get Parameters:
i. Device.WiFi.Radio.10000.Channel
ii. Device.Users.User.3.X_CISCO_COM_Password
Validated only the above get and set parameters mentioned.
...
For this error, ensure the network connection and the server and client-side services are up.
In client device, ex: RPI, check parodus is running actively, also ensure below points
<If applicable, describe any special circumstances, actions, exceptions, etc., that should be considered for troubleshooting.>
Since different services are involved in the communication, port-number specification should be taken into account
1. In Client-side, along with ServerURL Port number of Talaria should be specified.
2. From user-end, while requesting for information Tr1d1um's Port number should be given.
...
Contact
...
Organization
...
Phone
...
...
Role
...
<Contact Name>
...
<Organization>
...
<Phone>
...
<Email>
...