Page History

...

Introduction

Integration of Mesh-agent component in Turris Omnia Gateway for Sync between RDKB WEBUI and Plume NOC. Mesh-agent notifies the Plume NOC , when there is a change of SSID in RDKB WebUI and vice versa. 

...

          Opensync has to be manually triggered , and respective certificate has to be copied into the image

         Execute the below script , for linking the back-haul interfaces          root@TurrisOmnia

root@TurrisOmnia-GW:

...

# sh start_hostapd.sh

...

#!/bin/bash

...

killall dnsmasq

...

dnsmasq -u root -a 10.0.0.1 -i brlan0 -F 10.0.0.2,10.0.0.20 --dhcp-option=3,10.0.0.1 --dhcp-option=6,10.0.0.1 \

...

-a 169.254.2.1 -i wifi2 -F 169.254.2.2,169.254.2.10 \

...

-a 169.254.3.1 -i wifi3 -F 169.254.3.2,169.254.3.10 \

...

-C /dev/null -z --except-interface=lo -l /nvram/dnsmasq.leases --dhcp-script=/nvram/scripts/restart_mesh.sh \

...

--log-facility=/tmp/dnsmasq.log --log-dhcp

...

#touch /tmp/hostapd-acl0

...

#touch /tmp/hostapd-acl1

...

touch /tmp/hostapd-acl2

...

touch /tmp/hostapd-acl3

...

#hostapd_cli -i global raw ADD bss_config=wlan0:/nvram/hostapd0.conf

...

#hostapd_cli -i global raw ADD bss_config=wlan1:/nvram/hostapd1.conf

...

hostapd_cli -i global raw ADD bss_config=wlan2:/nvram/hostapd2.conf

...

hostapd_cli -i global raw ADD bss_config=wlan3:/nvram/hostapd3.conf

Execute the below script for running the opensync Managersroot@TurrisOmnia

root@TurrisOmnia-GW:/

...

# sh start_plume.sh

...

#temporary fix

...

iptables -P INPUT ACCEPT

...

brctl addbr br-home

...

#ln -s /nvram/dnsmasq.leases /tmp/dnsmasq.leases

...

if [ ! -f /usr/plume/etc/certs/ca.pem ];

...

then

...

cp /nvram/certs/c* /usr/plume/etc/certs/

...

fi

...

killall meshAgent

...

cd /usr/ccsp/mesh

...

meshAgent &

...

cd /usr/plume/etc/

...

/usr/plume/scripts/managers.init stop

...

/usr/plume/scripts/managers.init start

       Copy the Certificates in /usr/plume/etc/certs/*

       NoteNote: Cert files are provided by Opensync for Licencees 

      Opensync  Opensync mangers and NOC status can verified by querying OVSDB table

              1)       root@TurrisOmnia-GW:# /usr/plume/tools/ovsh  s  Manager

 --------------------------------------------------------------------------
_uuid | cdff~a085 |
_version | b6e7~58ac |
connection_mode | ["set",[]] |
external_ids | ["map",[]] |
inactivity_probe | 30000 |
is_connected | true |
max_backoff | ["set",[]] |
other_config | ["map",[]] |
status | ["map",[["sec_since_connect","31"],["state","ACTIVE"]]] |
target | ssl:54.200.0.59:443 |
----------------------------------------------------------------------------

...

                    UserName and Password are given by provided for Opensync Licencees

2)  Access RDKB-WebUI , in the browser <erouter0-ip>:8080

...

• System Work Flow

               Image Added

Executing System

...

Changing the SSID in Plume NOC

           Click on EDIT button and change the SSID

...

        CR component name is: eRT.com.cisco.spvtg.ccsp.CR
        subsystem_prefix eRT.
        getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.SSID.1.SSID
        Execution succeed.
        Parameter 1 name: Device.WiFi.SSID.1.SSID
        type: string, value: Test-turris

Use Case 2:

Change Changing the SSID in WebUI or via dmcli

...

Log on to plume NOC and verify the Changed SSID is updated from dmcli

Limitations

• RDKB WebUI  is not coming up, with recent changes in gateway image.
•  ccspwifiagent is not coming up during  bootup ( systemctl restart ccspwifiagent )

Troubleshooting

• Error Messages

...