SI NO | Automation ID | Steps | Summary | Release | Contributor | Test Case Type |
---|
1 |
SI NO | Automation ID | Steps | Summary | Release | Contributor |
---|
1 | TC-RDKB-WIFI-1011 | 6 | Verify default SSID on devices using SNMP | Release 1 | RDKM |
2 | TC-RDKB-WIFI-BAND-STEERING-1001 | 2 | Validate the default value of band steering Capacity using TR181 data object via WEBPA and verify this Parameter is read only | Release 1 | RDKM |
3ATM-10024 | Validate AirTimeManagement by Assigning Percentages to the Stations added via dmcli. (2.4Ghz)6 | Verify default SSID on devices using SNMP | Release 1 | RDKM | 1 DOT0 |
410106 | BAND-STEERING-1001 | 2 | Validate the default value of band steering Capacity using TR181 data object via WEBPA and verify this Parameter is read only |
Verify default SSID using WebPA5101611 | Verify telemetry 4 | Validate AirTimeManagement by Assigning Percentages to the Stations added via dmcli. (2.4Ghz) | Release 1 | RDKM | 1 DOT0 |
4 | TC-RDKB-WIFI-1010 | 6 | Verify default SSID using WebPA | Release 1 | RDKM | 1 DOT0 |
5 | TC-RDKB-WIFI-1016 | 11 | Verify telemetry for wifi channel bandwidth for 2.4G | Release 1 | RDKM | 1 DOT0 |
6 | TC-RDKB-WIFI-MESH-1000 | 7 | Verify Mesh Enable does not change the 5ghz channel to DFS range | Release 1 | RDKM | 1 DOT0 |
7 | TC-RDKB-DEF-SSID-5005 | 4 | Cross-verify the Default Private Wi-Fi SSID and password retrieved from WebPA with the configurations from SNMP | Release 2 | RDKM | 1 DOT0 |
8 | TC-RDKB-MESH-WIFI-1001 | 5 | Verify enabling Bridge Mode using WebPA when the MESH is enabled | Release 2 | RDKM | 1 DOT0 |
9 | TC-RDKB-MESH-WIFI-1002 | 5 | Verify enabling Bridge Mode using SNMP when the MESH is enabled | Release 2 | RDKM | 1 DOT0 |
10 | TC-RDKB-WIFI-RESTORE-1001 | 21 | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using webpa command for doing WIFI settings reset | Release 3 | RDKM | 1 DOT0 |
11 | TC-RDKB-MESH-WIFI-1004 | 2 | Verify enabling MESH when the Bridge Mode is enabled. | Release 3 | RDKM | 1 DOT0 |
12 | TC-RDKB-WIFI-2050 | 6 | Verify that Wi-Fi connectivity of 5 GHz frequency SSID is not affected when 2.4 GHz frequency SSID is disabled | Release 4 | RDKM | 1 DOT0 |
13 | TC-RDKB-WIFI-1001 | 18 | verify the status of wifi mesh service on enabling and disabling it | Release 4 | RDKM | 1 DOT0 |
14 | TC-RDKB-WIFI-5051 | 24 | Verify Management Frame Power Controls for 2.4 GHz and 5 GHz Radios using WebPA | Release 4 | RDKM | 1 DOT0 |
15 | TC-RDKB-WIFI-ATM-1001 | 3 | Validate AirTimeManagement by Assigning Values at APGroup Level | Release 4 | RDKM | 1 DOT0 |
16 | TC-RDKB-WIFI-TX-RATE-CONFIG-5064 | 17 | To verfiy high power support in 5GHZ band channel | Release 4 | RDKM | 1 DOT0 |
17 | TC-RDKB-WIFI-RESTORE-1002 | 19 | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using SNMP command for doing WIFI settings reset. | Release 4 | RDKM | 1 DOT0 |
18 | TC-RDKB-WIFI-TX-RATE-CONFIG-5061 | 48 | Verify the configuration of Transmission Control Rate for 2.4 GHz and 5GHz Radio using WebPA | Release 4 | RDKM | 1 DOT0 |
19 | TC-RDKB-WIFI-CON-PERF-1002 | 2 | Find out the average mean time for Wi-Fi connection establishment of 2.4GHz radio band with 20 times | Release 4 | RDKM | 1 DOT0 |
20 | TC-RDKB-WIFI-CON-PERF-1003 | 2 | Find out the average mean time for Wi-Fi connection establishment of 5GHz radio band with 20 times | Release 4 | RDKM | 1 DOT0 |
21 | TC-RDKB-WIFI-4001 | 10 | Ping via IPV4 and IPV6 on 2.4GHz when 5GHz is disabled. | Release 4 | RDKM | 1 DOT0 |
22 | TC-RDKB-WIFI-4002 | 10 | Ping via IPV4 and IPV6 on 5GHz when 2.4GHz is disabled. | Release 4 | RDKM | 1 DOT0 |
23 | TC-RDKB-WIFI-4003 | 12 | Test to verify that LAN side wireless CPE gets an IP address when dual radio bands(2.4GHZ and 5 GHZ) are enabled in CM | Release 4 | RDKM | 1 DOT0 |
24 | TC-RDKB-WIFI-4004 | 20 | Enable/Disable both 2.4GHz, and 5Ghz and confirm Client connects/disconnects successfully | Release 4 | RDKM | 1 DOT0 |
25 | TC-RDKB-WIFI-5001 | 15 | Verify 2.4 GHz WiFi beacon rate changing behavior | Release 4 | RDKM | 1 DOT0 |
26 | TC-RDKB-WIFI-2001 | 6 | Enable/Disable Broadcast SSID for 2.4 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 1 DOT0 |
27 | TC-RDKB-WIFI-2002 | 6 | Enable/Disable Broadcast SSID for 5 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 1 DOT0 |
28 | TC-RDKB-WIFI-BAND-STEERING-1005 | 3 | Verify Set or Get PhyRate threshold for 2.4GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM | 1 DOT0 |
29 | TC-RDKB-WIFI-BAND-STEERING-1004 | 3 | Verify Set or Get PhyRate threshold for 5GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM | 1 DOT0 |
30 | TC-RDKB-WIFI-BAND-STEERING-1011 | 15 | Set IdleInactiveTime and OverlaodInactiveTimne to values and verify cfg -s and lbd.conf is updated | Release 4 | RDKM | 1 DOT0 |
31 | TC-RDKB-WIFI-BAND-STEERING-1003 | 7 | verify the factory default value of Band steering paarmeters using webpa and dmcli | Release 4 | RDKM | 1 DOT0 |
32 | TC-RDKB-WIFI-CON-PERF-1000 | 5 | Find out the successful Wi-Fi connectivity rate of 2.4GHz radio band with 10 times in Wireless Gateway | Release |
418TXRATECONFIG-506148Verify the configuration of Transmission Control Rate for 2.4 GHz and 5GHz Radio using WebPA | Release 4 | RDKM | Find out the successful Wi-Fi connectivity rate of 5GHz radio band with 10 times in Wireless Gateway | Release 5 | RDKM | 1 DOT0 |
34 |
19-WIFI-CONPERF10022 | Find out the average mean time for Wi-Fi connection establishment of 2.4GHz radio band with 20 times | Release 4 | RDKM | 4 | Test to verify the default number of allowed clients for PublicWiFi Secure and open SSID using WebPA. | Release 5 | RDKM | 1 DOT0 |
35 |
20CONPERF10032 | Find out the average mean time for Wi-Fi connection establishment of 5GHz radio band with 20 times | Release 4 | RDKM | 22 | Validate that SSH, telnet to LAN geteway IP from connected clients is not successful | Release 5 | RDKM | 1 DOT0 |
36 |
214001Ping via IPV4 and IPV6 on 2.4GHz when 5GHz is disabled. | Release 4 | RDKM | Verify the reduction in power level of 2.4GHz WiFi Access Point does not impact the non-management frames | Release 5 | RDKM | 1 DOT0 |
37 |
224002Ping via IPV4 and IPV6 on 5GHz when 2.4GHz is disabled. | Release 4 | RDKM | Verify the reduction in power level of 5GHz WiFi Access Point does not impact the non-management frames. | Release 5 | RDKM | 1 DOT0 |
38 |
23400312 | Test to verify that LAN side wireless CPE gets an IP address when dual radio bands(2.4GHZ and 5 GHZ) are enabled in CM | Release 4 | RDKM | 15 | This test case is to Verify the controlled user access (Allow) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 1 DOT0 |
39 |
24400420 | Enable/Disable both 2.4GHz, and 5Ghz and confirm Client connects/disconnects successfully | Release 4 | RDKM | 7 | Ability to disable WiFi Radio through WEBPA | Release 5 | RDKM | 1 DOT0 |
40 |
25500115 | Verify 2.4 GHz WiFi beacon rate changing behavior | Release 4 | RDKM | 14 | This test case is to verify the controlled user access (Allow All) to the Specific Device for 2.4 and 5 GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 1 DOT0 |
41 |
2620016 | Enable/Disable Broadcast SSID 15 | Verify the controlled user access (Allow) to the specific Devices for 2.4 |
Ghz WiFi network and verify disabled statusGHZ against different MAC addresses by way of MACc ACLs | Release 5 |
Release 4271 DOT0 |
42 | TC-RDKB-WIFI-CLIENT- |
20026 | Enable/Disable Broadcast SSID for 5 Ghz WiFi network and verify disabled status | Release 4 | RDKM | 13 | Test to verify WiFi client connect disconnect events | Release 5 | RDKM | 1 DOT0 |
43 |
28BANDSTEERING10053 Set or Get PhyRate threshold for 2.4GHz band to initiate Steering using TR69 data objectsthe IP range in 2.4GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | 1 DOT0 |
44 |
Release 4 | RDKM | 29BAND-STEERING-10043 | Verify Set or Get PhyRate threshold for 5GHz band to initiate Steering using TR69 data objects | Release 4 | RDKM | 5GHZ-DHCP-IPV4-DSBLE-5001 | 5 | Verify the IP range in 5GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | 1 DOT0 |
45 |
30BANDSTEERING101115 | Set IdleInactiveTime and OverlaodInactiveTimne to values and verify cfg -s and lbd.conf is updated | Release 4 | RDKM | 14 | Verify 2.4 GHz SSID is enabled | Release 5 | RDKM | 1 DOT0 |
46 |
31BANDSTEERING10037 | verify the factory default value of Band steering paarmeters using webpa and dmcli | Release 4 | RDKM | 14 | Verify that the passphrase key of WIFI access point can be updated for 5 Ghz | Release 5 | RDKM | 1 DOT0 |
47 |
32CON-PERF-10005 | Find out the successful Wi-Fi connectivity rate of 2.4GHz radio band with 10 times in Wireless Gateway4005 | 16 | Verify Security Mode for WiFi access bands (2.4 and 5 GHz) | Release 5 | RDKM |
33CONPERF5 | Find out the successful Wi-Fi connectivity rate of 5GHz radio band with 10 times in Wireless Gateway | Release 5 | RDKM | 34 | TC-RDKB-WIFI-5020 | 4 | Test to verify the default number of allowed clients for PublicWiFi Secure and open SSID using WebPA.4 | Verify that WIFI radio does not support channel number other than the possible channels defined | Release 5 | RDKM | 1 DOT0 |
35CCNEG100122 | Validate that SSH, telnet to LAN geteway IP from connected clients is not successful8 | Verify the Reserved IP for clients for Ethernet client | Release 5 | RDKM |
361 DOT0 |
50 | TC-RDKB-WIFI-RADIO- |
505310 the reduction in power level that Wi-Fi connectivity of 2.4GHz |
WiFi Access Point does not impact the non-management framesfrequency is not affected when 5GHz frequency Radio is disabled | Release 6 | RDKM | 1 DOT0 |
51 |
Release 5 | RDKM | 37505410 | Verify the reduction in power level of 5GHz WiFi Access Point does not impact the non-management frames. | Release 5 | RDKM | CC-IP-5001 | 30 | Verify that when WIFI Radio is disabled in CM, wireless CPE should not get an ip address | Release 6 | RDKM | 1 DOT0 |
52 |
38501415 | This test case is to Verify the controlled user access (Allow) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | CHNL-CONFIG-5073 | 18 | Verify Client Connectivity to 5GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | 1 DOT0 |
53 | TC-RDKB-WIFI-TRANS-1000 | 4 | Test to verify data transmission between 2 connected(LAN-WLAN;WLAN to LAN) clients | Release 6 | RDKM | 1 DOT0 |
54 |
39 | TC-RDKB-WIFI_RADIO-1002 | 7 | Ability to disable WiFi Radio through WEBPA | Release 5 | RDKM |
40 | TC-RDKB-WIFI-CHNL-CONFIG- |
501114 | This test case is to verify the controlled user access (Allow All) to the Specific Device for 2.4 and 5 GHZ against different MAC addresses by way of MAC ACLs | Release 5 | RDKM | 20 | Verify Client Connectivity to 2.4GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | 1 DOT0 |
55 |
41501215 | Verify the controlled user access (Allow) to the specific Devices for 2.4 GHZ against different MAC addresses by way of MACc ACLs | Release 5 | RDKM | 8 | Test to verify Wi-Fi Interworking Information Element | Release 6 | RDKM | 1 DOT0 |
56 |
42WIFICLIENT100113 | Test to verify WiFi client connect disconnect events | Release 5 | RDKM | 29 | Test case is created as part of Configuration of Wi-Fi Tx Rate for 2.4GHz Radio and 5Ghz Radio | Release 6 | RDKM | 1 DOT0 |
57 |
43WIFI-2GHZ-DHCP-IPV4-DSBLE-50015 | Verify the IP range in 2.4GHZ WiFi connected client when DHCP Server disabled. | Release 5 | RDKM | WIFISSID-2003 | 12 | Test case is to validate the failure authentication attempts | Release 6 | RDKM | 1 DOT0 |
58 |
445GHZ-DHCP-IPV4-DSBLE5 IP range in 5GHZ WiFi connected client when DHCP Server disabled.WIFI Connectivity on Dual Band Radio 802.11n client with security mode open | Release 6 | RDKM | 1 DOT0 |
59 | TC-RDKB-MFPCONFIG-1002 | 4 | Verify power cycle persist the MFPConfig values | Release 7 | RDKM | 1 DOT0 |
60 |
Release 5 | RDKM | 45 | TC-RDKB-WIFI-KEY-PHARSE-5001 | 14 | Verify 2.4 GHz SSID is enabled | Release 5 | RDKM |
46WIFI-KEY-PHARSE-500214 | Verify that the passphrase key of WIFI access point can be updated for 5 Ghz | Release 5 | RDKM | MFPCONFIG-1003 | 4 | Verify MFPConfig is configurable by Wi-Fi HAL | Release 7 | RDKM | 1 DOT0 |
61 |
47400516 | Verify Security Mode for WiFi access bands (2.4 and 5 GHz) | Release 5 | RDKM | 13 | Test to verify Default values after factory reset and value persistent after reboot | Release 7 | RDKM | 1 DOT0 |
62 |
48-POSSIBLE-CHANNELS4 | Verify that WIFI radio does not support channel number other than the possible channels defined | Release 5 | RDKM | 25 | Verify WiFi GAS TR-181 parameters and their default values | Release 7 | RDKM | 1 DOT0 |
63 |
49 | TC-RDKB-FORCE_DISABLE_WIFI- |
RESERVED-IP-10038 | Verify the Reserved IP for clients for Ethernet client | Release 5 | RDKM | 1002 | 21 | Verify force disable wifi radio functionality in bridge mode | Release 7 | RDKM | 1 DOT0 |
64 |
50RADIO500125 | Verify that Wi-Fi connectivity of 2.4GHz frequency is not affected when 5GHz frequency Radio is disabled | Release 6 | RDKM | 8 | Validate the SSID name and BSSID of the Publicwifi | Release 7 | RDKM | 1 DOT0 |
65 |
51CCIP500130 | Verify that when WIFI Radio is disabled in CM, wireless CPE should not get an ip address | Release 6 | RDKM | 21 | Private WiFi channel selection should remain same post PublicWiFi enabled | Release 7 | RDKM | 1 DOT0 |
66 |
52CHNLCONFIG507318 | Verify Client Connectivity to 5GHz bands with Channel Selection Mode is Manual | Release 6 | RDKM | 9 | Verify the Reserved IP for clients for 2.4ghz | Release 7 | RDKM | 1 DOT0 |
67 |
53TRANS10004 | Test to verify data transmission between 2 connected(LAN-WLAN;WLAN to LAN) clients | Release 6 | RDKM | 9 | Verify the Reserved IP for clients for 5ghz | Release 7 | RDKM | 1 DOT0 |
68 |
54CHNLCONFIG507220 Client Connectivity to 2.4GHz bands with Channel Selection Mode is Manualthe WIFI Connectivity on Dual Band Radio for Client for 2.4 and 5 Ghz with security mode open | Release 7 | RDKM | 1 DOT0 |
69 |
Release 6 | RDKM | 55IE10028 | Test to verify Wi-Fi Interworking Information Element | Release 6 | RDKM | 46 | Verify enable one radio & disable another radio and check the internet connectivity | Release 7 | RDKM | 1 DOT0 |
70 |
56TX-RATE-CONFIG-506229 | Test case is created as part of Configuration of Wi-Fi Tx Rate for 2.4GHz Radio and 5Ghz Radio | Release 6 | RDKM | 5015 | 15 | This test case is to Verify the controlled user access (Deny) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM | 1 DOT0 |
71 |
57WIFISSID200312Test validate the failure authentication attemptsVerify the controlled user access (Deny) for 2.4GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM | 1 DOT0 |
72 |
Release 6 | RDKM | 5850012226 | Verify the WIFI Connectivity on Dual Band Radio 2.4 - 802.11n |
client with security mode open, 5-802.11ac with security mode WPA2-PSK ( AES ) | Release 7 | RDKM | 1 DOT0 |
73 |
Release 6 | RDKM | 59MFPCONFIG10024 | Verify power cycle persist the MFPConfig values12 | Method to verify Logging all occurrences of connections to LNF PSK SSIDs | Release 7 | RDKM |
60MFPCONFIG10034 | Verify MFPConfig is configurable by Wi-Fi HAL46 | Verify the default channel bandwidth and enable & disable the radio for 2.4GHz & 5GHz with connected clients | Release 7 | RDKM | 1 DOT0 |
61_BLASTER13 | Test to verify Default values after factory reset and value persistent after reboot | Release 7 | RDKM | 20 | Validate notification is not seen for unauthenticated clients | Release 8 | RDKM | 1 DOT0 |
76 |
62_GAS100125 | Verify WiFi GAS TR-181 parameters and their default values | Release 7 | RDKM | 5016 | 26 | Verify Connecting Multiple Clients to the Gateway device via Wi-Fi network and check the internet connectivity | Release 8 | RDKM | 1 DOT0 |
77 |
63FORCE_DISABLE_100221 force disable wifi radio functionality in bridge modeWiFi status after disabling and enabling | Release |
764PUBLICWIFICONFIG10018 | Validate the SSID name and BSSID of the Publicwifi | Release 7 | RDKM | 16 | Verify WG supports Open Security mode for 2.4 &5 GHZ frequency band | Release 8 | RDKM | 1 DOT0 |
79 |
65PUBLIC-AUTOCH-300121Private WiFi channel selection should remain same post PublicWiFi enabled | Release 7 | RDKM | Verify WiFi status after disabling | Release 8 | RDKM | 1 DOT0 |
80 |
66RESERVEDIP10019 the Reserved IP for clients WG supports WAP2(AES) Security mode for 2. |
4ghz4 &5 GHZ frequency band with valid & invalid key passpharse | Release |
767WIFIRESERVEDIP-10029 | Verify the Reserved IP for clients for 5ghz | Release 7 | RDKM | 10 | Test to validate the private 24/5ghz_Verify BSSID remains same after Factory Reset | Release 8 | RDKM | 1 DOT0 |
82 |
68SECTYOPEN500158 | Verify the WIFI Connectivity on Dual Band Radio for Client for 2.4 and 5 Ghz with security mode open | Release 7 | RDKM | 6 | Test to verify that 802.11a should not be able to connect to CM when operating standard is 'b,g,n', 'g,n' mode | Release 9 | RDKM | 1 DOT0 |
83 |
69WIFICCRADIO500146 enable one radio & disable another radio and check the internet connectivitythe password validations when client connected to 2.4GHz | Release 9 | RDKM | 1 DOT0 |
84 |
Release 7 | RDKM | 70-WIFI-501515 | This test case is to Verify the controlled user access (Deny) for 5GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM | -5GHZ-HOME-NTW-PSWD-1002 | 6 | Verify the password validations when client connected to 5GHz | Release 9 | RDKM | 1 DOT0 |
85 | TC-RDKB-LAN-HOME-NTW-PSWD-1003 | 6 | Verify the password validations when client connected to LAN | Release 9 | RDKM | 1 DOT0 |
86 |
71 | TC-RDKB-WIFI-5013 | 15 | This test case is to Verify the controlled user access (Deny) for 2.4GHZ against different MAC addresses by way of MAC ACLs | Release 7 | RDKM |
72CONFIGCC-500226 WIFI Connectivity on Dual Band Radio 2.4 - 802.11n, 5-802.11ac with security mode WPA2-PSK ( AES )configuration of Transmission Control Rate for 5Ghz(a,n,ac) Radio after reboot | Release 10 | RDKM | 1 DOT0 |
87 |
Release 7 | RDKM | 73CCWIN5004Method to verify Logging all occurrences of connections to LNF PSK SSIDs | Release 7 | RDKM | Validate the DHCP configuration Using SNMP | Release 10 | RDKM | 1 DOT0 |
88 |
74CHANNEL500146 | Verify the default channel bandwidth and enable & disable the radio for 2.4GHz & 5GHz with connected clients | Release 7 | RDKM | 15 | Prefer Private functionality should be applicable for Public WiFi open and secure hotspot SSIDs | Release 10 | RDKM | 1 DOT0 |
89 |
75CCAUTH-100120 | Validate notification is not seen for unauthenticated clients | Release 8 | RDKM | 14 | Verify the configuration of Transmission Control Rate for 5Ghz(n) Radio after reboot | Release 10 | RDKM | 1 DOT0 |
90 |
76 | TC-RDKB-WIFI-PREFERPRIVATE- |
501626 | Verify Connecting Multiple Clients to the Gateway device via Wi-Fi network and check the internet connectivity | Release 8 | RDKM | 15 | Connect to the Connected client having 2.4GHZ WiFi Capability | Release 10 | RDKM | 1 DOT0 |
91 |
77RESET1001 17 status after disabling and enablingsettings after Migration to QA Release | Release11 | RDKM | 1 DOT0 |
92 |
Release 8 | RDKM | 78WIFI-CC-OPEN-500116 | Verify WG supports Open Security mode for 2.4 &5 GHZ frequency band | Release 8 | RDKM | HOTSPOT_INVALID-1001 | 20 | Test to verify XPC notification for public hotspot parameters with invalid values using webpa | Release12 | RDKM | 1 DOT0 |
93 |
79WIFIRESET17 | Verify WiFi status after disabling | Release 8 | RDKM | 12 | Verify internet access to the part of keyword added to manages sites are accessible in Wi-Fi. | Release 17 | RDKM | 1 DOT0 |
94 |
80WIFICC-WPA2500122 WG supports WAP2(AES) Security mode for 2.4 &5 GHZ frequency band with valid & invalid key passpharseWi-Fi Driver supports an API used by RDKB to set the Wi-Fi Region | Release 17 | RDKM | 1 DOT0 |
95 |
Release 8 | RDKM | 81BSSIDPERSIST100110 | Test to validate the private 24/5ghz_Verify BSSID remains same after Factory Reset | Release 8 | RDKM | 9002 | 6 | Verify Change in Wi-Fi region is reflected in regulatory region after device reboot. | Release 17 | RDKM | 1 DOT0 |
96 |
82WIFICC-WIN-50036 | Test to verify that 802.11a should not be able to connect to CM when operating standard is 'b,g,n', 'g,n' mode | Release 9 | RDKM | DEFAULT_ENCRY-2053 | 9 | To Verify 2.4GHz: Default SSID, Protection mode and encryption mode. | Release 17 | Vodafone | 1 DOT0 |
97 |
832GHZHOME-NTW-PSWD-10016 | Verify the password validations when client connected to 2.4GHz | Release 9 | RDKM | GATEWAYIP-2013 | 3 | To validate if an error message is displayed when gateway address is set to outside of the range. | Release 17 | Vodafone | 1 DOT0 |
98 |
845GHZHOME-NTW-PSWD-10026 | Verify the password validations when client connected to 5GHz | Release 9 | RDKM | HOSTNAME-2019 | 5 | To validate if 2 Wi-Fi LAN connected devices can communicate via host name. | Release 17 | Vodafone | 1 DOT0 |
99 |
85LANHOME-NTW-PSWD-10036 | Verify the password validations when client connected to LAN | Release 9 | RDKM | NETACCESS-2033 | 5 | To verify the device must be able to connect 2.4GHz Wi-Fi and Internet should work. | Release 17 | Vodafone | 1 DOT0 |
100 |
86WIFISCRTYCHECK-100112 | Validate Selecting open risky mode and cancelling it immediately should not gray out password field Ethernet | Release 9 | RDKM | 4 | To verify the Boot Time of the device is less than 5 MIN (300s) | Release 17 | Vodafone | 1 DOT0 |
101 |
87WIFISCRTYCHECK-1002Validate Selecting open risky mode and cancelling it immediately should not gray out password field Wifi 2.4Ghz client | Release 9 | RDKM | To verify SNMP walk/Get/Set on RDKB MIBs for CM IPv4 and IPv6 | Release 17 | Vodafone | 1 DOT0 |
102 |
88WIFISCRTYCHECK-100312 | Validate Selecting open risky mode and cancelling it immediately should not gray out password field Wifi 5Ghz client | Release 9 | RDKM | 3 | To verify if the Dut is accessible using CM IPv6 Address. | Release 17 | Vodafone | 1 DOT0 |
103 |
89PWDMGMT100115 | Verify the password management for WEBUI user for Admin page | Release 9 | RDKM | 2 | The DHCP settings should not allow user to set same DHCP Pool MinAddress and MaxAddress- max CPE as One. | Release 17 | Vodafone | 1 DOT0 |
104 |
90CONDEV500114 | Verify the details of connected clients can be retrieved from User admin page | Release 9 | RDKM | 7 | Wi-Fi MAC Filter - Allow. | Release 17 | Vodafone | 1 DOT0 |
105 |
91 | TC-RDKB-CHANNEL-BANDWIDTH-1001 | 17 | Login to Lan side GUI page of device | Release 9 | RDKM |
92WIFIRADIO300114 | Verify the configuration of Transmission Control Rate for 5Ghz(a,n,ac) Radio after reboot | Release 10 | RDKM | 15 | Verify Wired performance (TCP) test on WAN to LAN side (Smoke). | Release 17 | Vodafone | 1 DOT0 |
106 | 3DOT0-TC-RDKB-MESH-DFS-1001 | 21 | Wi-Fi DFS support in MESH solution | Release 18 | RDKM | 3 DOT0 |
107 |
93 | TC-RDKB-WIFI-DHCP-SNMP-5001 | 12 | Validate the DHCP configuration Using SNMP | Release 10 | RDKM |
94PREFERPRIVATE100215 | Prefer Private functionality should be applicable for Public WiFi open and secure hotspot SSIDs | Release 10 | RDKM | 9 | Test to verify WiFi power tables | Release 19 | RDKM | 1 DOT0 |
108 | 3DOT0-TC-RDKB-HARVESTER-1001 | 11 | Compare the time stamp of the Single client uuid in wiFiLog.txt.0 and Received upstream event data in PARODUSLOg.txt.0 | Release 19 | RDKM | 3 DOT0 |
109 |
95 | TC-RDKB-PUBLIC-WIFI-CONFIG-5002 | 8 | Verify public WiFi Configuration Using LAN Admin Login | Release 10 | RDKM |
96PUBLICWIFICONFIG50038 | Verify public WiFi Configuration Using LAN Admin Login 5 GHz | Release 10 | RDKM | 16 | Test to verify the wireless client connected to 2.4 GHz Private Wi-Fi network is blocked for all days & for particular time period | Release 20 | RDKM | 1 DOT0 |
110 |
97WIFIRADIO-300214 | Verify the configuration of Transmission Control Rate for 5Ghz(n) Radio after reboot | Release 10 | RDKM | 8 | Validate client connectivity with 6GHz, 5GHz High, 5GHz Low bands in OneWifi | Release 20 | RDKM | 1 DOT0 |
111 |
98WIFIPREFERPRIVATE100315Connect to the Connected client having 2.4GHZ WiFi Capability | Release 10 | RDKM | Verify the internet connectivity and iperf traffic when client mode is set to 'g' for 2.4 GHz and 'a' for 5 GHz. | Release 20 | RDKM | 1 DOT0 |
112 |
99 | TC-RDKB-WIFI-MIGRATION-1001 | 51 | Verify WiFi settings after Migration to QA Release | Release11 | RDKM |
100HOTSPOT_INVALID-100120 | Test to verify XPC notification for public hotspot parameters with invalid values using webpa | Release12 | RDKM | WIFI-SANITY-1002 | 16 | Verify the connectivity of 5ghz wifi on different configurations. | Release 20 | RDKM | 1 DOT0 |
113 | 3DOT0-TC-RDKB-WIFI-1100 | 18 | Monitor for WIFI_ERROR_WifiDmCliError marker after upgrade and Ccspwifi process is in zombie state. | Release 20 | RDKM | 3 DOT0 |
114 |
101 | TC-RDKB-CHANNEL-BANDWIDTH-1002 | 24 | Test to verify channel bandwidth of 5Ghz wifi ssid from Lan GUI | Release12 | RDKM |
102IPV4GATEWAYIP20133 | To validate if an error message is displayed when gateway address is set to outside of the range. | Release 17 | Vodafone | 8 | Validate the 2.4G Utilization with Increased Population of Devices | Release 21 | RDKM | 1 DOT0 |
115 |
103IPV4HOSTNAME20195 | To validate if 2 Wi-Fi LAN connected devices can communicate via host name. | Release 17 | Vodafone | 6 | Coverage Improvement for Latency in Wifi clients | Release 21 | RDKM | 1 DOT0 |
116 | 3DOT0-TC-RDKB-WIFI_DB-1001 | 6 | Store RDKB Wi-FI DB in encrypted NVRAM | Release 21 | RDKM | 3 DOT0 |
117 |
104 | TC-RDKB-IPV4-NETACCESS-2033 | 5 | To verify the device must be able to connect 2.4GHz Wi-Fi and Internet should work. | Release 17 | Vodafone |
105IPV4BOOTTIME20394 | To verify the Boot Time of the device is less than 5 MIN (300s) | Release 17 | Vodafone | 12 | Validate data model and default configuration settings for client activity stats telemetry markers | Release 22 | RDKM | 1 DOT0 |
118 |
106IPV4CM204312 | To verify SNMP walk/Get/Set on RDKB MIBs for CM IPv4 and IPv6 | Release 17 | Vodafone | 7 | Verify WiFi Spectrum Analyzer tab contains fields like Band, channel, MAC, SSID, Signal Level, Mode, Security. | Release 22 | RDKM | 1 DOT0 |
119 |
107IPV4CM20453To verify if the Dut is accessible using CM IPv6 Address. | Release 17 | Vodafone | Test to verify password failure for private SSID | Release 22 | RDKM | 1 DOT0 |
120 |
108IPV4-DHCP-20542 | The DHCP settings should not allow user to set same DHCP Pool MinAddress and MaxAddress- max CPE as One. | Release 17 | Vodafone | WIFI-WEBPA-1026 | 9 | Verify Manual channel selection for WiFi frequency band using tr69/webpa | Release 23 | RDKM | 1 DOT0 |
121 |
109IPV4MAC_FILTER-20567 | Wi-Fi MAC Filter - Allow. | Release 17 | Vodafone | WIFI-5001 | 15 | Verify the RFC support on set & get of Private WiFi password via SNMP and verify the gateway supports to set & get private WiFi password via WebPA regardless of RFC status. | Release 23 | RDKM | 1 DOT0 |
122 |
110IPV4PORTFW205215 | Verify Wired performance (TCP) test on WAN to LAN side (Smoke). | Release 17 | 21 | Validate Telemetry Marker for WiFi Channel Utilization | Release 24 | RDKM | 1 DOT0 |
Vodafone