...
Contents
Introduction
...
This Release Notes document details on the delivery version 2020 M8 for the RDK Reference Platform to the RDK Community
- Release Feature Information
- Software and Hardware requirements to build
- Known limitations
- Updated Platform Tickets
...
Below are the list of release features supporting Turris Omnia, R-Pi and Emulator platforms.
S.No | Feature | Device | Profile | Remarks | Tickets |
---|
1 | RDK Services on Firebolt Image | R-Pi | RDK-V | RDKServices bringup and validation on Firebolt Mediaclient Image - Disable read-only-rootfs for RDK RPI images
- Gstreamer Ugly Plugin commercial license flag whitelisting
- WPE WebKit build error for cairo-gl.h header inclusion
- Fixed Controller UI launching issue
- Creation of separate manifest file with meta-wpe layer dependency to be removed in meta-cmf-raspberrypi
- Enable RDK Shell Distro feature for RDK Services
| |
2 | Yocto 3.1 Turris Omnia - Opensync integration with plume NOC and MeshAgent support | Turris-Omnia | RDKB | - Integrated Opensync and validated with Plume NOC
- Able to view the connected devices on Plume NOC
- Updated rdkb-turris-hal for dunfell branch
- Provided the fix for disabled AP's in RDKB webUI
| |
3 | Telemetry with cron job support | R-Pi | RDKB | Added the support of cron job to the Telemetry feature for RaspberryiPi | |
4 | Yocto 3.1 integration and validation for rdk-generic-camera-image | R-Pi | RDK-C | - Resolved the build failure issue and ensured smooth yocto 3.1 rdk-generic-camera-image build.
- Validated RDKC media server ( RMS ) , Continuous video recording( CVR ), Normal thumbnail and Firmware upgrade features.
| |
5 | Community Tickets | R-Pi, Turris Omnia and Emulator | RDKB | - RPI-B Hostapd not starting on rdk-next with recent merges.
- Initial wifi connection failure issue on both 2.4 and 5 Ghz
- In rpi ,Some of the WiFI parameters are not persistent on reboot
- [TDK] [AUTO] [RPI] Some of the parameters from PAM and WIFI are not persistent on reboot
RDKB RPI Failure Setting Device.X_CISCO_COM_DeviceControl.LanManagementEntry.1.LanMode [TDK][AUTO]Factory Reset via SNMP showing time-out error RPI-B Hostapd not starting on recent changes Validating New flashing instruction for latest model of Turris Omnia - Fixing build issues following the changes for creating sysupgrade image(wic)
- Mounting /nvram partition for newer model of Turris Omnia
- RDK Firmware upgrade support for newer model of Turris Omnia
- Removing u-boot marvell unused bbappend
|
|
6 | Community Tickets | R-Pi | RDK-V | - Change 40803 tries to start some critical services as non-root user but this fails on RPI
- RPI-V AAMP Playback via rdkmediaplayer is broken
| |
Hardware and Software Requirements
...
Supported software and hardware
- Preferred 2.4GHZ WIFI adapter for Emulator: Tenda 150Mbps Wireless PICO USB Adapter with RT5370 chipset (W311MI) (or)
Preferred 2.4GHZ WIFI adapter for Emulator: TP-Link AC1200 Wireless Dual Band USB Adapter (Archer T4U) - Preferred 5GHZ WIFI adapter for Emulator/RPI: TP-Link AC1200 Wireless Dual Band USB Adapter (Archer T4U)
- Preferred xfinity-wifi 2.4GHZ WIFI adapter for RPI: TP-LINK TL-WN823N 300Mbps Mini Wireless N USB Adapter
- New dongle - Ultra-fast 1300 (867+400) mbps wireless speed with 802.11ac
- Turris Omnia Target for Wi-Fi Extender functionality
- USB to Ethernet
- Desktop PCs
- 8 GB SD-Card
Known Issues and Limitations
Yocto-3.1 RDK Generic Camera Image in R-PI:
- WiFi connection:
- Wi-Fi IP is obtained through restarting the "wpa_supplicant.service" manually.
- The system date and time are not properly updating.
Project Documentation
...
Below is the list of supporting documents that are part of the release
1 | User Manual | | The user manual consists of a procedure to test the particular feature also covers Environment setup, Executing the System and Troubleshooting steps |
2 | System Test Plan Results | | This document contains multiple test cases and test results which are captured after test execution |
3 | Release Notes | | Release Notes -This document |
...
...