Page History

...

$ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
  build-essential chrpath socat cpio python python3 python3-pip python3-pexpect \
  xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev \
  pylint3 xterm bmap-tools

$ sudo apt-get install git cmake autoconf texinfo openjdk-8-jdk openjdk-8-jre \
  m4 libtool libtool-bin curl pkg-config lib32z1 doxygen

Repo Setup

In order to use Yocto build system, the repo tool must be properly installed on the machine.

...

machine codemachine code.rdkcentral.com
 login YOUR_USERNAME
 password YOUR_PASSWORD

Yocto Build Steps

...

bzip2 -d <path to ImageName.wic.bz2>
sudo -E bmaptool copy --nobmap <path to ImageName.wic> <path to SD card space>

Example:

$ bzip2 -d rdk-generic-broadband-image-raspberrypi-rdk-broadband.wic.bz2
$ sudo -E bmaptool copy --nobmap rdk-generic-broadband-image-raspberrypi-rdk-broadband.wic /dev/sdb

...

1.       For initial boot-up only, toggle the sub-menu in WebUI is not happening .

Validated Functionalities

Basic functions are validated in dunfell branch,

1. RPI 3B+ Board was successfully up
2. Able to browse the internet 
3. Able to get the erouter0 ip
4. dmcli commands are working as expected
5. All ccsp process and hostapd process are up
6. Able to connect the wireless clients
7. In wireless clients, Captive Portal page was launched for initial set-up
8. Re-connect the wifi clients with updated password and SSID
9. Able to browse the internet successfully in Connected clients
10. WebUI was launched in Web Browser
11. Able to login successfully
12. Factory_reset , Password change , Advanced functionalities are worked as expected
13. iptables rules are properly updated.
14. reboot and poweroff are working as expected.
15. LAN connection check

No	Feature	Supported
1	LAN Connected Devices-Ethernet
2	WAN Connected Devices-Wi-Fi
3	Parental Control
4	Firewall settings
5	Advanced Config: Port Triggering
6	Advanced Config: Port Forwarding
7	Advanced Config: Remote Management
8	Advanced Config: DMZ
9	Xfinity Wi-Fi 2.4/5 GHz – Public Hotspot
10	Test and Diagnostics
11	Local WebUI Configuration
12	Factory Reset
13	DHCP /Reserved IP
14	EthWan
15	Eth Agent
16	2.4 GHz Band Support
17	5 GHz Band Support
18	Bridge Mode Support
19	Persistent Storage Management
20	WebPA for Comcast,community
21	Lost and Found
22	Bluetooth
22	Harvester Support
23	TR-69
24	SNMP
27	Boot time data measurement
28	Wireless Protection Setup(WPS)
29	Captive Portal
30	Wi-Fi MAC Filtering
31	Log Rotation Support
32	Firmware Upgrade Support
33	Multiboot Support
34	Telemetry Support
35	IPV6
36	Log level control through CcspLogAgent
37	Band Steering using RSSI
38	Backup and Restore
39	SelfHeal
40	Password-Reset
41	WebUI JST