...

2.2.  Pre- requisites for enabling Telemetry2_0

Telemetry Version : 2 (by default telemetry version as 1)
1. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Enable bool true
2. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Version string 2
3. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.ConfigURL string https://xconf.rdkcentral.com:9092/loguploader/getT2Settings
4. touch /nvram/enable_t2_debug
5. reboot the device
6. pidof "telemetry2_0"

...

Below sample screenshots are enabling the T2 process  process of version 2 in target device(rpi),

After reboot the device,

...

Successful logs for sending the JSON report to xconf server,

 Configuration Configuration file

• Once the profile details are successfully retrieved , the conf file will be created under /nvram/.t2persistentfolder/DCMresponse.txt which has the server configurations 

Log File

$ cat /rdklogs/logs/telemetry2_0.txt.0

...

https://35.161.239.220/xconf/upload/b827eb1b564c_TELE_05-26-2021-07-45AM.json

Telemetry Version : 2.0.1

Pre- requisites for enabling Telemetry2_0

Telemetry Version : 2.0.1 (by default telemetry version as 1)
1. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Enable bool true
2. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.Version string 2.0.1
3. dmcli eRT setv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.Telemetry.ConfigURL string https://xconf.rdkcentral.com:9092/loguploader/getT2Settings
4. touch /nvram/enable_t2_debug
5. reboot the device
6. pidof "telemetry2_0"

7. T2 DataModel will be loaded

After board boot up, disable log rotation by using the command: 

$ systemctl disable rdkbLogMonitor

Below screenshot for enabling the T2 process of version 2.0.1 in rpi,

Image Added

After reboot the device,

Image Added