Versions Compared

Old Version 10

changes.mady.by.user Z-Savidha E

Saved on

compared with

New Version Current

changes.mady.by.user Ebrahim Shaik

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Stream Name, Default Region, IOT Credential Endpoint, Certificate key, Private Kay, Role Alias and cacertificate certificate key


STEP 3:

Have to copy certificate.pem,private.pem.key and cacert.pem keys into your RPI /etc/ssl/certs/ directory

...

Code Block
languagebash
titleConsole output
root@raspberrypi3-rdk-camera:~# ifconfig
eth0      Link encap:Ethernet  HWaddr B8:27:EB:87:67:91  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:89842 errors:0 dropped:0 overruns:0 frame:0
          TX packets:89842 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:25639748 (24.4 MiB)  TX bytes:25639748 (24.4 MiB)

wlan0     Link encap:Ethernet  HWaddr B8:27:EB:D2:32:C4  
          inet addr:192.168.43.146  Bcast:192.168.43.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:44 errors:0 dropped:0 overruns:0 frame:0
          TX packets:103 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:4484 (4.3 KiB)  TX bytes:10216 (9.9 KiB)

Possibility Possible errors:

  1.  If there is no Ip in etho or in wlan0, Then please confirm ethernet cable connectivity in RPI for etho IP or else follow up fresh bootup setup steps again and check wlan0 IP.
  2.  Again if ip not generated, then check running status of wpa_supplicant service with below command
    1. systemctl status wpa_supplicant

...

Code Block
languagebash
titleConsole output
root@raspberrypi3-rdk-camera:~# lsmod
Module                  Size  Used by
bcm2835_v4l2           40563  0
v4l2_common             4809  1 bcm2835_v4l2
videobuf2_vmalloc       6264  1 bcm2835_v4l2
videobuf2_memops        1528  1 videobuf2_vmalloc
videobuf2_v4l2         12640  1 bcm2835_v4l2
videobuf2_core         27389  2 bcm2835_v4l2,videobuf2_v4l2
videodev              154457  4 v4l2_common,videobuf2_core,bcm2835_v4l2,videobuf2_v4l2
media                  23307  1 videodev
brcmfmac              258239  0
brcmutil                7590  1 brcmfmac
snd_bcm2835            21405  0
cfg80211              492836  1 brcmfmac
snd_pcm                79872  1 snd_bcm2835
rfkill                 19936  3 cfg80211
snd_timer              20294  1 snd_pcm
snd                    52949  3 snd_timer,snd_bcm2835,snd_pcm
lirc_rpi                6840  0
lirc_dev                7533  1 lirc_rpi
uio_pdrv_genirq         3469  0
uio                     8703  1 uio_pdrv_genirq
fixed                   2876  0
sch_fq_codel            9662  2
ipv6                  384101  18

Possibility Possible errors:

  1. If bcm2834-v4l2 camera module not loaded in RPI, then try to load this module with modprobe and then check "lsmod" status
    1. modprobe bcm2835-v4l2

...

Code Block
languagebash
titleConsole output
root@raspberrypi0-rdk-camera:~# ls /dev/video0 
/dev/video0

Possibility Possible errors:

  1.  If video0 device not there within /dev directory, Then please check camera connectivity in both RPI target end and RPI camera end.
  2.  Reboot the system once you modified the camera connection.


STEP 4:

RMS Output

On Can view RTSP live streaming in VLC player, for RTSP streaming.

To view video in VLC player need to go to media→Open Network stream option in VLC and then need to give rtsp URL like below.need to enter media → Open Network Stream option and then give rtsp URL to play streaming content in VLC

rtsp://camera_ip:5544/stream2

Example :rtsp://192.168.43.146:5544/stream2

We can able to see the see  live streaming stream content on in VLC Player.

Note: VLC player available PC running  system and RPI target should run be in same network.


STEP 5:

CVR Output

Enter into Please go to the AWS account and then select the corresponding your video stream service which was we created for streaming.Press and press "Media Playback" option on the video stream playerto view video frames.

Streaming video content should decode properly on AWS.Can view decoded video buffers in AWS