Versions Compared

Old Version 20

changes.mady.by.user Keerthana Pandurangan

Saved on

compared with

New Version 21

changes.mady.by.user Keerthana Pandurangan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

MAC : CPE_MAC (Ex : d83add3c5cc3)

          2.  In CPE , trigger the below command,

root@RaspberryPi-Gateway:/rdklogs/logs# dmcli eRT setv Device.X_RDK_WebConfig.ForceSync string root
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
setv from/to component(webconfig): Device.X_RDK_WebConfig.ForceSync
Execution succeed.

3         3. Using dmcli to check the wifi DM parameters 

Code Block
languagebash
themeDJango
titlewifi-dmcli
collapsetrue
root@RaspberryPi-Gateway:/# dmcli eRT getv Device.WiFi.SSID.1.SSID
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.SSID.1.SSID
Execution succeed.
Parameter    1 name: Device.WiFi.SSID.1.SSID
               type:     string,    value: Test_webconfig_2g 

root@RaspberryPi-Gateway:/# dmcli eRT getv Device.WiFi.SSID.2.SSID
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.SSID.2.SSID
Execution succeed.
Parameter    1 name: Device.WiFi.SSID.2.SSID
               type:     string,    value: Test_webconfig_5g 

root@RaspberryPi-Gateway:/# dmcli eRT getv Device.WiFi.AccessPoint.1.Security.KeyPassphrase
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.1.Security.KeyPassphrase
Execution succeed.
Parameter    1 name: Device.WiFi.AccessPoint.1.Security.KeyPassphrase
               type:     string,    value: webconfig_2g 

root@RaspberryPi-Gateway:/# dmcli eRT getv Device.WiFi.AccessPoint.2.Security.KeyPassphrase
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.wifi): Device.WiFi.AccessPoint.2.Security.KeyPassphrase
Execution succeed.
Parameter    1 name: Device.WiFi.AccessPoint.2.Security.KeyPassphrase
               type:     string,    value: webconfig_5g 



root@RaspberryPi-Gateway:/# iw wlan0 info
Interface wlan0
	ifindex 16
	wdev 0x1
	addr d8:3a:dd:3c:5c:c5
	ssid Test_webconfig_2g
	type AP
	wiphy 0
	channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz
	txpower 31.00 dBm
root@RaspberryPi-Gateway:/# 
root@RaspberryPi-Gateway:/# iw wlan1 info
Interface wlan1
	ifindex 17
	wdev 0x100000001
	addr d0:37:45:f2:3c:b9
	ssid Test_webconfig_5g
	type AP
	wiphy 1
	txpower 23.00 dBm

4         4. Success Logs

Code Block
languagebash
themeDJango
titlewebconfig success logs
collapsetrue
240425-08:17:40.189970 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: doc privatessid is updated to version 289218514 status pending error_details none error_code 0 trans_id 0 temp->retry_count 0
240425-08:17:40.190537 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: subdoc_name: privatessid, version: 289218514, transaction_id: 25012
240425-08:17:40.190669 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: doc privatessid is updated to version 289218514 status pending error_details none error_code 0 trans_id 25012 temp->retry_count 0
240425-08:17:40.190736 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: Request:> param[0].name = Device.WiFi.Private, type = 5
240425-08:17:40.195397 [mod=WEBCONFIG, lvl=INFO] [tid=2909] WEBCONFIG: Received msg privatessid,25012,289218514,ACK,90 from topic webconfigSignal
240425-08:17:40.195501 [mod=WEBCONFIG, lvl=INFO] [tid=2909] WEBCONFIG: Received webconfig event signal Info privatessid,25012,289218514,ACK,90
240425-08:17:40.195649 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: TIMEOUT EVENT: privatessid,25012,289218514,ACK,90 (doc apply need time)
240425-08:17:40.195731 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: doc apply need time, start timer.
240425-08:17:40.195799 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: Timer list is empty
240425-08:17:40.195921 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: new_node->subdoc_name privatessid new_node->txid 25012 new_node->timeout 90 status 1 added to list
240425-08:17:40.195984 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: startWebcfgTimer success
240425-08:17:40.196150 [mod=WEBCONFIG, lvl=INFO] [tid=4377] WEBCONFIG: dest is event:subdoc-report/privatessid/mac:d83add3c5cc3/ack
240425-08:17:40.196231 [mod=WEBCONFIG, lvl=INFO] [tid=4377] WEBCONFIG: stringifiedNotifyPayload is {"device_id":"mac:d83add3c5cc3","namespace":"privatessid","application_status":"pending","timeout":90,"transaction_uuid":"c64bb03a-d4d0-4f30-9cfc-53bc18fd367b","version":"289218514"}
240425-08:17:40.196421 [mod=WEBCONFIG, lvl=INFO] [tid=4377] WEBCONFIG: Notification successfully sent to Webconfig.Upstream
240425-08:17:40.197419 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: The ret status for rbus_setMulti is 0
240425-08:17:40.197505 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: ccspRetStatus is 100 240425-08:17:40.227876 [mod=WEBCONFIG, lvl=INFO] [tid=4376] WEBCONFIG: Request:> param[0].name = Device.WiFi.Private, type = 5
240425-08:17:40.228193 [mod=WEBCONFIG, lvl=INFO] [tid=2909] WEBCONFIG: Received msg privatessid,25012,289218514,ACK,0 from topic webconfigSignal
240425-08:17:40.228284 [mod=WEBCONFIG, lvl=INFO] [tid=2909] WEBCONFIG: Received webconfig event signal Info privatessid,25012,289218514,ACK,0
240425-08:17:40.228459 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: ACK EVENT: privatessid,25012,289218514,ACK,0 (doc apply success)
240425-08:17:40.228526 [mod=WEBCONFIG, lvl=INFO] [tid=4381] WEBCONFIG: doc apply success, proceed to add to DB

...

MAC : CPE_MAC (Ex : d83add3c5cc3)

            2. In CPE , trigger the ForceSync as "root"

            3. Using dmcli to check the DM 

Code Block
languagebash
themeDJango
titlelan-dmcli
collapsetrue
root@RaspberryPi-Gateway:/# dmcli eRT getv Device.DHCPv4.Server.Pool.1.MinAddress
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.DHCPv4.Server.Pool.1.MinAddress
Execution succeed.
Parameter    1 name: Device.DHCPv4.Server.Pool.1.MinAddress
               type:     string,    value: 10.0.0.8 

root@RaspberryPi-Gateway:/# dmcli eRT getv Device.DHCPv4.Server.Pool.1.LeaseTime
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.DHCPv4.Server.Pool.1.LeaseTime
Execution succeed.
Parameter    1 name: Device.DHCPv4.Server.Pool.1.LeaseTime
               type:        int,    value: 7200 

root@RaspberryPi-Gateway:/# dmcli eRT getv Device.DHCPv4.Server.Pool.1.MaxAddress
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.DHCPv4.Server.Pool.1.MaxAddress
Execution succeed.
Parameter    1 name: Device.DHCPv4.Server.Pool.1.MaxAddress
               type:     string,    value: 10.0.0.240

4             4. Success Logs

Code Block
languagebash
themeDJango
titlewebconfig success logs
collapsetrue
240423-06:06:16.534327 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc lan is updated to version 627376240 status pending error_details none error_code 0 trans_id 0 temp->retry_count 0
240423-06:06:16.534921 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: subdoc_name: lan, version: 627376240, transaction_id: 8517
240423-06:06:16.535035 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc lan is updated to version 627376240 status pending error_details none error_code 0 trans_id 8517 temp->retry_count 0
240423-06:06:16.535104 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: Request:> param[0].name = Device.DHCPv4.Server.Lan, type = 5
240423-06:06:16.538867 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received msg lan,8517,627376240,ACK,13 from topic webconfigSignal
240423-06:06:16.538964 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received webconfig event signal Info lan,8517,627376240,ACK,13
240423-06:06:16.539538 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: TIMEOUT EVENT: lan,8517,627376240,ACK,13 (doc apply need time)
240423-06:06:16.539607 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: doc apply need time, start timer.
240423-06:06:16.539665 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: Timer list is empty
240423-06:06:16.539725 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: new_node->subdoc_name lan new_node->txid 8517 new_node->timeout 13 status 1 added to list
240423-06:06:16.539780 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: startWebcfgTimer success
240423-06:06:16.540403 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: dest is event:subdoc-report/lan/mac:d83add3c5cc3/ack
240423-06:06:16.540489 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: stringifiedNotifyPayload is {"device_id":"mac:d83add3c5cc3","namespace":"lan","application_status":"pending","timeout":13,"transaction_uuid":"bc673958-91ea-4b7b-b068-1c7d9252417f","version":"627376240"}
240423-06:06:16.540695 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: Notification successfully sent to Webconfig.Upstream
240423-06:06:16.540700 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: The ret status for rbus_setMulti is 0
240423-06:06:16.541295 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: ccspRetStatus is 100
240423-06:06:16.541364 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: setValues success. ccspStatus : 100

...

MAC : CPE_MAC (Ex : d83add3c5cc3)

2             2. In CPE , trigger root as ForceSync

3             3. Using dmcli to check the DM,

Code Block
languagebash
themeDJango
titledmz-dmcli
collapsetrue
root@RaspberryPi-Gateway:/usr/www2# dmcli eRT getv Device.NAT.X_CISCO_COM_DMZ.Enable
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.NAT.X_CISCO_COM_DMZ.Enable
Execution succeed.
Parameter    1 name: Device.NAT.X_CISCO_COM_DMZ.Enable
               type:       bool,    value: true

root@RaspberryPi-Gateway:/usr/www2# dmcli eRT getv Device.NAT.X_CISCO_COM_DMZ.InternalIP
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.NAT.X_CISCO_COM_DMZ.InternalIP
Execution succeed.
Parameter    1 name: Device.NAT.X_CISCO_COM_DMZ.InternalIP
               type:     string,    value: 10.0.0.17

            4. Success Logs

Code Block
languagebash
themeDJango
titlewebconfig logs
collapsetrue
240423-06:14:24.589883 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc wan is updated to version 3808881139 status pending error_details none error_code 0 trans_id 0 temp->retry_count 0
240423-06:14:24.590358 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: subdoc_name: wan, version: 3808881139, transaction_id: 5016
240423-06:14:24.590448 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc wan is updated to version 3808881139 status pending error_details none error_code 0 trans_id 5016 temp->retry_count 0
240423-06:14:24.590494 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: Request:> param[0].name = Device.NAT.X_CISCO_COM_DMZ.Data, type = 5
240423-06:14:24.593472 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received msg wan,5016,3808881139,ACK,10 from topic webconfigSignal
240423-06:14:24.593540 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received webconfig event signal Info wan,5016,3808881139,ACK,10
240423-06:14:24.593638 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: TIMEOUT EVENT: wan,5016,3808881139,ACK,10 (doc apply need time)
240423-06:14:24.593688 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: doc apply need time, start timer.
240423-06:14:24.593749 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: Timer list is empty
240423-06:14:24.593796 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: new_node->subdoc_name wan new_node->txid 5016 new_node->timeout 10 status 1 added to list
240423-06:14:24.593834 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: startWebcfgTimer success
240423-06:14:24.593973 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: dest is event:subdoc-report/wan/mac:d83add3c5cc3/ack
240423-06:14:24.594023 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: stringifiedNotifyPayload is {"device_id":"mac:d83add3c5cc3","namespace":"wan","application_status":"pending","timeout":10,"transaction_uuid":"ae7952f3-1886-47aa-9427-dfca584a1f2d","version":"3808881139"}
240423-06:14:24.594147 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: Notification successfully sent to Webconfig.Upstream
240423-06:14:24.595800 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: The ret status for rbus_setMulti is 0
240423-06:14:24.595864 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: ccspRetStatus is 100
240423-06:14:24.595912 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: setValues success. ccspStatus : 100

...

MAC : CPE_MAC (Ex : d83add3c5cc3)

            2. In CPE, trigger ForceSync as root

3           3. Using dmcli to check the DM

Code Block
languagebash
themeDJango
titledmcli-PM
collapsetrue
root@RaspberryPi-Gateway:~# dmcli eRT getv Device.NAT.                               
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.NAT.
Execution succeed.
Parameter    1 name: Device.NAT.X_CISCO_COM_TCPTimeout
               type:       uint,    value: 0 
Parameter    2 name: Device.NAT.X_CISCO_COM_UDPTimeout
               type:       uint,    value: 0 
Parameter    3 name: Device.NAT.X_CISCO_COM_ICMPTimeout
               type:       uint,    value: 0 
Parameter    4 name: Device.NAT.X_Comcast_com_EnablePortMapping
               type:       bool,    value: true 
Parameter    5 name: Device.NAT.X_Comcast_com_EnableHSPortMapping
               type:       bool,    value: true 
Parameter    6 name: Device.NAT.X_Comcast_com_EnableNATMapping
               type:       bool,    value: false 
Parameter    7 name: Device.NAT.PortMappingNumberOfEntries
               type:       uint,    value: 3 
Parameter    8 name: Device.NAT.X_CISCO_COM_DMZ.Enable
               type:       bool,    value: false 
Parameter    9 name: Device.NAT.X_CISCO_COM_DMZ.RemoteIPStart
               type:     string,    value:  
Parameter   10 name: Device.NAT.X_CISCO_COM_DMZ.RemoteIPEnd
               type:     string,    value:  
Parameter   11 name: Device.NAT.X_CISCO_COM_DMZ.InternalIP
               type:     string,    value: 0.0.0.0 
Parameter   12 name: Device.NAT.X_CISCO_COM_DMZ.InternalMAC
               type:     string,    value:  
Parameter   13 name: Device.NAT.X_CISCO_COM_DMZ.IPv6Host
               type:     string,    value:  
Parameter   14 name: Device.NAT.X_CISCO_COM_DMZ.Data
               type:     string,    value:  
Parameter   15 name: Device.NAT.PortMapping.1.Enable
               type:       bool,    value: true 
Parameter   16 name: Device.NAT.PortMapping.1.Status
               type:     string,    value: Enabled 
Parameter   17 name: Device.NAT.PortMapping.1.Alias
               type:     string,    value:  
Parameter   18 name: Device.NAT.PortMapping.1.AllInterfaces
               type:       bool,    value: true 
Parameter   19 name: Device.NAT.PortMapping.1.LeaseDuration
               type:       uint,    value: 0 
Parameter   20 name: Device.NAT.PortMapping.1.ExternalPort
               type:       uint,    value: 23 
Parameter   21 name: Device.NAT.PortMapping.1.ExternalPortEndRange
               type:       uint,    value: 23 
Parameter   22 name: Device.NAT.PortMapping.1.InternalPort
               type:       uint,    value: 0 
Parameter   23 name: Device.NAT.PortMapping.1.Protocol
               type:     string,    value: BOTH 
Parameter   24 name: Device.NAT.PortMapping.1.InternalClient
               type:     string,    value: 10.0.0.111 
Parameter   25 name: Device.NAT.PortMapping.1.RemoteHost
               type:     string,    value: 0.0.0.0 
Parameter   26 name: Device.NAT.PortMapping.1.X_Comcast_com_PublicIP
               type:     string,    value: 0.0.0.0 
Parameter   27 name: Device.NAT.PortMapping.1.Description
               type:     string,    value: telnet 
Parameter   28 name: Device.NAT.PortMapping.1.Interface
               type:     string,    value:  
Parameter   29 name: Device.NAT.PortMapping.1.X_CISCO_COM_InternalClientV6
               type:     string,    value: x 
Parameter   30 name: Device.NAT.PortMapping.2.Enable
               type:       bool,    value: true 
Parameter   31 name: Device.NAT.PortMapping.2.Status
               type:     string,    value: Enabled 
Parameter   32 name: Device.NAT.PortMapping.2.Alias
               type:     string,    value:  
Parameter   33 name: Device.NAT.PortMapping.2.AllInterfaces
               type:       bool,    value: true 
Parameter   34 name: Device.NAT.PortMapping.2.LeaseDuration
               type:       uint,    value: 0 
Parameter   35 name: Device.NAT.PortMapping.2.ExternalPort
               type:       uint,    value: 25 
Parameter   36 name: Device.NAT.PortMapping.2.ExternalPortEndRange
               type:       uint,    value: 25 
Parameter   37 name: Device.NAT.PortMapping.2.InternalPort
               type:       uint,    value: 0 
Parameter   38 name: Device.NAT.PortMapping.2.Protocol
               type:     string,    value: BOTH 
Parameter   39 name: Device.NAT.PortMapping.2.InternalClient
               type:     string,    value: 10.0.0.112 
Parameter   40 name: Device.NAT.PortMapping.2.RemoteHost
               type:     string,    value: 0.0.0.0 
Parameter   41 name: Device.NAT.PortMapping.2.X_Comcast_com_PublicIP
               type:     string,    value: 0.0.0.0 
Parameter   42 name: Device.NAT.PortMapping.2.Description
               type:     string,    value: mail 
Parameter   43 name: Device.NAT.PortMapping.2.Interface
               type:     string,    value:  
Parameter   44 name: Device.NAT.PortMapping.2.X_CISCO_COM_InternalClientV6
               type:     string,    value: x 
Parameter   45 name: Device.NAT.PortMapping.3.Enable
               type:       bool,    value: true 
Parameter   46 name: Device.NAT.PortMapping.3.Status
               type:     string,    value: Enabled 
Parameter   47 name: Device.NAT.PortMapping.3.Alias
               type:     string,    value:  
Parameter   48 name: Device.NAT.PortMapping.3.AllInterfaces
               type:       bool,    value: true 
Parameter   49 name: Device.NAT.PortMapping.3.LeaseDuration
               type:       uint,    value: 0 
Parameter   50 name: Device.NAT.PortMapping.3.ExternalPort
               type:       uint,    value: 443 
Parameter   51 name: Device.NAT.PortMapping.3.ExternalPortEndRange
               type:       uint,    value: 443 
Parameter   52 name: Device.NAT.PortMapping.3.InternalPort
               type:       uint,    value: 0 
Parameter   53 name: Device.NAT.PortMapping.3.Protocol
               type:     string,    value: BOTH 
Parameter   54 name: Device.NAT.PortMapping.3.InternalClient
               type:     string,    value: 10.0.0.102 
Parameter   55 name: Device.NAT.PortMapping.3.RemoteHost
               type:     string,    value: 0.0.0.0 
Parameter   56 name: Device.NAT.PortMapping.3.X_Comcast_com_PublicIP
               type:     string,    value: 0.0.0.0 
Parameter   57 name: Device.NAT.PortMapping.3.Description
               type:     string,    value: https 
Parameter   58 name: Device.NAT.PortMapping.3.Interface
               type:     string,    value:  
Parameter   59 name: Device.NAT.PortMapping.3.X_CISCO_COM_InternalClientV6
               type:     string,    value: x 
Parameter   60 name: Device.NAT.X_RDK_PortMapping.Data
               type:     string,    value:  
Parameter   61 name: Device.NAT.X_CISCO_COM_PortTriggers.Enable
               type:       bool,    value: false 
Parameter   62 name: Device.NAT.X_CISCO_COM_PortTriggers.TriggerNumberOfEntries
               type:       uint,    value: 0


              4. Success Logs

Code Block
languagebash
themeDJango
titleweconfig logs
collapsetrue
240423-06:29:55.135135 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc portforwarding is updated to version 3329431262 status pending error_details none error_code 0 trans_id 0 temp->retry_count 0
240423-06:29:55.135651 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: subdoc_name: portforwarding, version: 3329431262, transaction_id: 63776
240423-06:29:55.135754 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: doc portforwarding is updated to version 3329431262 status pending error_details none error_code 0 trans_id 63776 temp->retry_count 0
240423-06:29:55.135811 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: Request:> param[0].name = Device.NAT.X_RDK_PortMapping.Data, type = 5
240423-06:29:55.139435 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received msg portforwarding,63776,3329431262,ACK,19 from topic webconfigSignal
240423-06:29:55.139522 [mod=WEBCONFIG, lvl=INFO] [tid=2793] WEBCONFIG: Received webconfig event signal Info portforwarding,63776,3329431262,ACK,19
240423-06:29:55.139694 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: TIMEOUT EVENT: portforwarding,63776,3329431262,ACK,19 (doc apply need time)
240423-06:29:55.139765 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: doc apply need time, start timer.
240423-06:29:55.139840 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: Timer list is empty
240423-06:29:55.139912 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: new_node->subdoc_name portforwarding new_node->txid 63776 new_node->timeout 19 status 1 added to list
240423-06:29:55.139967 [mod=WEBCONFIG, lvl=INFO] [tid=3699] WEBCONFIG: startWebcfgTimer success
240423-06:29:55.140139 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: dest is event:subdoc-report/portforwarding/mac:d83add3c5cc3/ack
240423-06:29:55.140202 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: stringifiedNotifyPayload is {"device_id":"mac:d83add3c5cc3","namespace":"portforwarding","application_status":"pending","timeout":19,"transaction_uuid":"6acc5f86-542d-46fd-bcbe-f63b67fbce45","version":"3329431262"}
240423-06:29:55.140383 [mod=WEBCONFIG, lvl=INFO] [tid=3693] WEBCONFIG: Notification successfully sent to Webconfig.Upstream
240423-06:29:55.142148 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: The ret status for rbus_setMulti is 0
240423-06:29:55.142234 [mod=WEBCONFIG, lvl=INFO] [tid=3692] WEBCONFIG: ccspRetStatus is 100

...