Page History

...

1. Raspberry Pi 3 b or Raspberry Pi 3 b+ device

                                           

                           RPI      RPI 3B                                                                              RPI 3B+

2. 851pxStandard Standard USB keyboard

3. Television set/monitor with HDMI input.

4. Ethernet cables

5. USB-Ethernet Adapter

6. SD Card ( Preferably 8GB or more )

7. Tp-link dongles
8. USB to Serial Debugging Adaptor

USB to Serial Debug converter Link ans set up

                Image Added                              Image Added

Purchase Link - USB to Serial                                                   RPI 3B Pin Diagram

The above mentioned adaptor (PL2303) will support Linux host machine ( ubuntu ) with proper connection between RPI (for both 3B and B+) as below

• Connect GND (Pin 6) of RPI with PL2303 GND Pin
• Connect GPIO14 (Pin 8) of RPI with PL2303 RX Pin
• Connect GPIO15 (Pin 10) of RPI with PL2303 TX Pin

After connection, please run minicom in host machine to establish serial connection with RPI

Image Removed https://wwwhelp.amazonubuntu.in/PL2303-Converter-Adapter-Aurdino-Raspberry/dp/B00UZERG94com/community/Minicom

Note : In usual, adaptor will have device name as ttyUSB0 after connected to host PC ( can be checked using dmesg command in host ). Please configure minicom accordingly. 

Dongles Information Links

...

• For xfinity-wifi - 2g - 

...

• Purchase Link - TP-LINK

...

• TL-WN823N

...

...

• For Private-wifi and xfinity-wifi - 5g - 

...

• Purchase Link - TP-Link AC1300

Lists of Supported Features

...