Page History

...

19. Verify the created Targeting rule displayed on the Targeting rule page

20.

RPi device side configuration and testing process:

1. Flash the Telemetry supported RDK Broadband image

...

1. in SD card and load it

...

1. in the RPi board.

...

1. Image

...

1. should boot up

...

1. , verify the image version (cat /version.txt) and IP address of the board using "ifconfig" command
2. Make the LogMonitor disable by using the command: systemctl disable rdkbLogMonitor
3. Reboot the Rpi board
4. Login to the tftp server mentioned in “Upload repository” field of Permanent Profile in telemetry

...

1. Verify that rtl_json.txt file contains the search results for each of the marker mentioned in the Permanent profile page of Telemetry. If the search is not found it will not show any output for that marker in the rtl_json.txt file.

RPi device side configuration and testing process:

1. Verify that all the log files of Rpi board available under /rdklogs/logs will be available in the tftp server in a compressed format(tar.gz)

 Test Test results:

Future Enhancement:

...