Page History

...

The Raspberry Pi 3 Model B+ featuring a 64-bit quad core processor running at 1.4 Ghz. R-Pi3 B+ supports the dual band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN which provides an high edge for the broadband developer community to test the RDK-B stack with Router, WiFi functionalities. RPI uses Ethernet Port for internet connectivity which is used for RDKB porting in RPI of Router Profile. In general, two more WAN Profiles supported by RDKB are EPON and Docsis which uses Fibre and RF as input physical medium. 

Build Instructions

Repo setup

...

                   The equipment listed below is required for complete functionality of the standalone environment. The only devices that are tested to work properly in this solution are the specific brands and models listed below. Support for other types of equipment is not available at this time.

1. Raspberry Pi 3 b or Raspberry Pi 3 b+ device
2. Standard USB keyboard
3. Television set/monitor with HDMI input.
4. Ethernet cables
5. USB-Ethernet Adapter
6. SD Card ( Preferably 8GB or more )
7. Tp-link dongles
8. USB to Serial Debugging Adaptor ( Needed only for serial debugging )

                            RPI 3B

...

                          RPI 3B+                          

...

Standard USB keyboard

...

Television set/monitor with HDMI input.

...

Ethernet cables

...

USB-Ethernet Adapter

...

SD Card ( Preferably 8GB or more )

...

USB to Serial Debug converter Link and set up

...

Purchase Link(PL2303) - USB to Serial         

...

RPI 3 Pin Diagram

The above mentioned adaptor (PL2303) will support Linux host machine ( ubuntu ) with proper connection between RPI (for both 3B and B+) as below

...

Note : In usual, adaptor will have device name as ttyUSB0 after connected to host PC ( can be checked using dmesg command in host ). Please configure minicom accordingly. 

Dongles Information Links

• For xfinity-wifi - 2g - Purchase Link - TP-LINK TL-WN823N
• For Private-wifi and xfinity-wifi - 5g - Purchase Link - TP-Link AC1300

...