Page History

...

Enabling Band Steering Example:

Image Modified

After enabling of Band Steering, the SSID broadcasted by the two interfaces are same. A 5GHz capable client will normally connect to a 5GHz client and older 2.4GHz client will connect to 2.4GHz frequency band.

Both Bands having same SSID:

Image Modified

Disabling of Band Steering will reset all previously made configuration on the 5GHz band. Band Steering can be disabled by the below command.

Disabling Band Steering Example:

Image Modified

Setting the Threshold value Example:

Image AddedImage Added

Client connected to 5GHz initially Example:

Image Added

Client after switching to 2.4GHz when RSSI signal goes above -25dBm Example:

Image Added

Troubleshooting

• Error Messages

...

Device should be dual band capable to support Band Steering functionality.

Switching does not happen in case of client not capable of connecting to 5GHz. They cannot connect to router when their RSSI signal is greater than RSSI threshold set.

Support

...