Remote management is used to control the target device from outside wan network.The user can access the webgui admin page remotely and can take the configure the cable modem box. This is basically achieved through HTTP and HTTPS protocols.


TR-181 Data Model Parameter of Remote Management

       Module

 Data Model Params

 CcspPandM(TR181-USGv2.XML)

  1. Device.UserInterface.X_CISCO_COM_RemoteAccess.HttpEnable          
  2. Device.UserInterface.X_CISCO_COM_RemoteAccess.HttpsEnable
  3. Device.UserInterface.X_CISCO_COM_RemoteAccess.Enable
  4. Device.UserInterface.X_CISCO_COM_RemoteAccess.FromAnyIP
  5. Device.UserInterface.X_CISCO_COM_RemoteAccess.StartIp
  6. Device.UserInterface.X_CISCO_COM_RemoteAccess.EndIp
  7. Device.X_CISCO_COM_DeviceControl.HTTPPort
  8. Device.X_CISCO_COM_DeviceControl.HTTPSPort


Set Parameter Work Flow

Using the Dmcli commands the user shall test the feature.


Sequence Diagram



  • No labels

DISCLAIMER: Please note that the use of the RDK Wiki is subject to its Privacy Policy & Terms of Use. In addition, this Wiki may be accessed by all RDK licensees and their contractors.