Introduction

This manual describes the rdk-generic-broadband-image build procedure for Yocto 4.0 builds. This will upgrade the build system used in RDKB, from dunfell(3.1) to kirkstone(4.0). In addition to upgrades to opensource packages, Yocto 4.0 also contain Long term Support release feature. The current version lacks the variety of features available in the kirkstone. The upgraded build tools will be used to generate rdk-generic-broadband-image for Raspberrypi reference platform. 

Yocto 4.0  Upgradation support the following:

• Yocto BSP layer for meta-raspberrypi.
• OpenEmbedded and Yocto kirkstone.
• Linux kernel 5.10.32.
• Version upgrades for bitbake, and other oe/python recipes.

Each component in RDK is a standalone repository with its own individual build tools producing a library or set of binaries. When we upgrade the OE layers to the newer versions, we need to make necessary changes in the RDK layers which use these components, to avoid build failures.

Host Setup

The OpenEmbedded build system should be able to run on Ubuntu 20.0 distribution/other compatible linux distribution with the following versions for Git, tar, and Python.

• Git 2.25.1 or greater
• tar 1.30 or greater
• Python 3.10.4 or greater
• Coreutils(E.g realpath)

Note: You should also have about 50 Gbytes of free disk space for building images.

The essential packages you need for a supported Ubuntu or Debian distribution are shown in the following command:

Repo Setup

In order to use Yocto build system, the repo tool must be properly installed on the machine.

To install Repo make sure you have a /bin directory in your home directory and that it is included in your path

$ mkdir ~/bin
$ PATH=~/bin:$PATH
Download the repo tool and ensure that it is executable
$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
$ chmod a+x ~/bin/repo

Note: it is also recommended to put credentials in ~/.netrc when interacting with repo.

A sample ~/.netrc file is illustrated below

machine code.rdkcentral.com
login YOUR_USERNAME
password YOUR_PASSWORD

Yocto Build Steps

To build, follow below instructions

$ mkdir <workspace dir>
$ cd <workspace dir>
$ repo init -u https://code.rdkcentral.com/r/manifests -b kirkstone -m rdkb-extsrc.xml
$ repo sync -j`nproc` --no-clone-bundle
$ MACHINE=raspberrypi4-rdk-broadband source meta-cmf-raspberrypi/setup-environment

Please use the below MACHINE command for enabling the debug tools as part of the build,
MACHINE=raspberrypi4-rdk-broadband DISTRO_NAME=enable_debug_tool source meta-cmf-raspberrypi/setup-environment

$ bitbake rdk-generic-broadband-image

Flashing Procedure

Following command can be used to flash the RPI image to sd card using linux machine . bmap tool should be available in linux

bzip2 -d <path to ImageName.wic.bz2>
sudo -E bmaptool copy --nobmap <path to ImageName.wic> <path to SD card space>

Example:

$ bzip2 -d rdk-generic-broadband-image-raspberrypi-rdk-broadband.wic.bz2
$ sudo -E bmaptool copy --nobmap rdk-generic-broadband-image-raspberrypi-rdk-broadband.wic.bz2 /dev/sdb

Validated Functionalities

No	Feature	Supported
1	LAN Connected Devices-Ethernet
2	WAN Connected Devices-Wi-Fi
3	Parental Control
4	Firewall settings
5	Advanced Config: Port Triggering
6	Advanced Config: Port Forwarding
7	Advanced Config: Remote Management
8	Advanced Config: DMZ
9	Xfinity Wi-Fi 2.4/5 GHz – Public Hotspot
10	Test and Diagnostics
11	Local WebUI Configuration
12	Factory Reset
13	DHCP /Reserved IP
15	Eth Agent
16	2.4 GHz Band Support
17	5 GHz Band Support
18	Bridge Mode Support
19	Persistent Storage Management
20	WebPA for Comcast,community
21	Lost and Found
22	Bluetooth
22	Harvester Support
23	TR-69
24	SNMP
27	Boot time data measurement
28	Wireless Protection Setup(WPS - 2G support)
29	Captive Portal
30	Wi-Fi MAC Filtering
31	Log Rotation Support
32	Firmware Upgrade Support
34	Telemetry Support
35	IPV6
36	Log level control through CcspLogAgent
37	Band Steering using RSSI
38	Backup and Restore
39	SelfHeal
40	Password-Reset
41	WebUI JST
43	RdkWanManager
44	RdkFwUpgradeManager

References :

We captured all the kirkstone build errors and its fixes in this link  RDK-B RPI4 32 bit .

Code Commits

https://code.rdkcentral.com/r/q/topic:RPI_kirkstone_migration

Kirkstone (Yocto 4.0) - Epic Story:

RDK-B RPI4 32 bit:
REFPLTB-1806 - Getting issue details... STATUS

Jira Tickets :

Technical support:

support@rdkcentral.com