Page History

...

• Build the image RDK-C Image.
  
• Ensure 8GB sd-card is available for flashing
• Flash the build image to sd-card
• Setup xconf server ready with rules and download location for RPI device
• Place the upgrading image and checksum file in tftp server
• Boot the flashed image

Note :

1. RPI will go for reboot while booting for the first time, since two more partition needs to be created which requires reboot. Depends on the image present in xconf and RPI, further reboot will happen for upgrade. Please refer to design (High level design approach - RDK Camera - 2020 - M5) for how firmware upgrade works with bank switching

...