Introduction

      Captive portal provides user to configure their Wi-Fi SSID, credentials.On fresh boot-up and factory-reset, Captive Portal prompts to change the default ssid name and password for browsing a any url's on connected client's through Gateway network.

Captive Portal Working

...

steps 

Step No : 1

                     On Fresh boot-up/Factor-Reset , User's associated with Emulator Gateway Network. Wi-Fi AccessPoint broadcasting in client Mobile.Now Connect your Mobile devices to default Wi-Fi SSID and Passkey of Emulator Device.

Emulator Wireless Credentials ,

For 2g :  SSID : RDKB-EMU-2.4G and Passkey : 2g-password

For 5g : SSID : RDKB-EMU-5G and passkey : 5g-password

Step No : 2

                            User's can browse any http url's  on connected clients, It will automatically redirects to Captive Portal Page Next open any web browser on connected client and then try to access any of the http site/WebUI . We observe that http url request gets redirected to default captive portal page as shown as below :

Screen shot : 1

For example : http://home.icequake.net

Step No : 3 

Type http://10.0.0.1:80 in browser

Image Added

Screen shot : 2

                   Set your individual Wi-Fi SSID and Passkey for your Emulator device in the captive portal page. Click on Next.

Image Added

Screen shot : 3

                            Type GatewayIP:80(eg: 10.0.0.1:80) on connected clinet's browser, WebUI will automatically redirected to Captive PortalClick on Next . The New SSID and Passkey is set and then comes out from Captive Portal page.

Image AddedImage Added

           Image Removed

Step No :

...

3

                          Enabling and Disabling the captive portal page on fresh boot-up / factory-reset

...

If this parameter "Device.DeviceInfo.X_RDKCENTRAL-COM_CaptivePortalEnable" gets enabled, Captive Portal should be UP instead of WebUI.

Step No : 4

                    Login to the device WebUI from your PC. Please follow the below steps,

                    URL : http://10.0.0.1(GatewayIP):80

                     Default login ID and Password : admin and password

Image Added

Step No : 5

                    If it's first time login , you are prompted to change your default password.Please login again using the New Password.

Image Added

Image Added

Step No : 6

Bring the device to Factory Reset Mode :

•  Go to Troubleshooting drop-down menu and select the Reset/Restore Gateway.

                                Click on Restore Factory Settings option, a confirmation window opens and then click 'OK'.

 Image Added