...

• Sample 
      
      
• As soon as the formula is saved , displays the device settings and Log upload settings options
     

• Device settings

  Name	RDKB_telemetry
  CheckOnReboot	true
  Are active	true
  Expression	2 1 2 1 1

    

• Defining the Upload repositories

  URL	http://35.155.171.121:9093/admin/ux/#/uploadrepository
  Flow	Xconf-server ->DCM -> Upload repositories
  Name	RDKB_telemetry
  Description	RDKB_telemetry
  URL	tftp    : 35.155.171.121 HTTP :  http://35.155.171.121/xconf/logupload.php

  

• Log upload settings

  Name	<Enter the name given during Log upload formula creation>
  Upload On Reboot	true
  Number of Days	1
  Are settings active	true
  Upload Repository	RDKB_telemetry
  Cron Expression	2 1 1 1 1

  

• Test Page
  

  URL	http://35.155.171.121:9093/admin/ux/#/formulas/all
  Path	Xconf-server-> DCM -> Test Page

Telemetry

• Defining Telemetry profile

...

• Create Targeting rule 

  URL	http://35.155.171.121:9093/admin/ux/#/formulas/all
  Path	Xconf-server-> Telemetry->Targeting rule -> Create

    

  1. Give the Unique rule name
  2. Select the rule. Here , used estbMacAddress as the rule
  3. Select the Bound profile (Telemetry Permanent Profile Name)

           Sample

      

• Test Page

  URL	http://35.155.171.121:9093/admin/ux/#/formulas/all
  Path	Xconf-server-> Telemetry->Test Page

  1. To test whether the configured profile details are retrieved properly from xconf-server
  2. Give the rule specified in “Targeting Rule” section i.e., estbMacAddress here

               

• Sample:
  
  

  

...

• Restart the dcm-log service using “systemctl restart dcm-log”
• To check the status of the service “systemctl status dcm-log”
• By triggering the service , rpi starts uploading the logs to the xconf-server
• The log upload and Telemetry markers can be uploaded via tftp and http
• The profile can be verified using curl, conf file , through logs and in server as below

1.  CURL

• Syntax : curl -i 'http://<ip>:9092/loguploader/getSettings?estbMacAddress=<MAC>’

2. Configuration file

• Once the profile details are successfully retrieved , the conf file will be created under /tmp which has the server configurations 
• The telemetry markers are compared with the corresponding log files and if the match is found then the markers are uploaded to the http://35.155.171.121/xconf/upload/

• Sample 1: tftp root@RaspberryPi-Gateway:~# cat /tmp/DCMSettings.conf urn:settings:GroupName=RDKB_telemetry urn:settings:CheckOnReboot=true urn:settings:CheckSchedule:cron=2 1 2 1 1 urn:settings:CheckSchedule:DurationMinutes=0 urn:settings:LogUploadSettings:Message=null urn:settings:LogUploadSettings:Name=RDKB_telemetry urn:settings:LogUploadSettings:NumberOfDays=0 urn:settings:LogUploadSettings:UploadRepositoryName=RDKB_telemetry urn:settings:LogUploadSettings:RepositoryURL=tftp://35.155.171.121 urn:settings:LogUploadSettings:UploadOnReboot=true urn:settings:LogUploadSettings:UploadImmediately=false urn:settings:LogUploadSettings:upload=true urn:settings:LogUploadSettings:UploadSchedule:cron=2 1 1 1 1 urn:settings:LogUploadSettings:UploadSchedule:levelone:cron=null urn:settings:LogUploadSettings:UploadSchedule:leveltwo:cron=null urn:settings:LogUploadSettings:UploadSchedule:levelthree:cron=null urn:settings:LogUploadSettings:UploadSchedule:DurationMinutes=0 urn:settings:VODSettings:Name=null urn:settings:VODSettings:LocationsURL=null urn:settings:VODSettings:SRMIPList=null "urn:settings:TelemetryProfile":{"id":"72ac2ca9-b248-4a5e-b120-27ff37382564","telemetryProfile":[{"header" : "Firewall","content" : "staring firewall service","type" : "FirewallDebug.txt","pollingFrequency":"1"}],"schedule":"3","expires":0,"telemetryProfile:name":"RDKB_tele,"uploadRepository:URL":"35.155.171.121","uploadRepository:uploadProtocol":"TFTP"} Sample 2:  http root@RaspberryPi-Gateway:~# cat /tmp/DCMSettings.conf urn:settings:GroupName=RDKB_telemetry urn:settings:CheckOnReboot=true urn:settings:CheckSchedule:cron=2 1 2 1 1 urn:settings:CheckSchedule:DurationMinutes=0 urn:settings:LogUploadSettings:Message=null urn:settings:LogUploadSettings:Name=RDKB_telemetry urn:settings:LogUploadSettings:NumberOfDays=0 urn:settings:LogUploadSettings:UploadRepositoryName=RDKB_telemetry urn:settings:LogUploadSettings:RepositoryURL=http://35.155.171.121/xconf/logupload.php urn:settings:LogUploadSettings:UploadOnReboot=true urn:settings:LogUploadSettings:UploadImmediately=false urn:settings:LogUploadSettings:upload=true urn:settings:LogUploadSettings:UploadSchedule:cron=2 1 1 1 1 urn:settings:LogUploadSettings:UploadSchedule:levelone:cron=null urn:settings:LogUploadSettings:UploadSchedule:leveltwo:cron=null urn:settings:LogUploadSettings:UploadSchedule:levelthree:cron=null urn:settings:LogUploadSettings:UploadSchedule:DurationMinutes=0 urn:settings:VODSettings:Name=null urn:settings:VODSettings:LocationsURL=null urn:settings:VODSettings:SRMIPList=null "urn:settings:TelemetryProfile":{"id":"72ac2ca9-b248-4a5e-b120-27ff37382564","telemetryProfile":[{"header" : "Firewall","content" : "starting firewall service","type" : "FirewallDebug.txt","pollingFrequency":"1"}],"schedule":"3","expires":0,"telemetryProfile:name":"RDKB_tele","uploadRepository:URL":"http://35.155.171.121/xconf/telemetry_upload.php","uploadRepository:uploadProtocol":"HTTP"}

 3. Logs

• Log file to monitor and analyze the files which are uploaded to server
• /rdklogs/logs/dcmscript.log
  TFTP 
  
  
  HTTP
  
  
  
• /rdklogs/logs/telemetry.log
  TFTP
  
  
  HTTP
  
  
  

4. Xconf-Server

• URL : http://35.155.171.121/xconf/upload/

• The tar file (of all logs) and JSON file of telemetry will be uploaded
• Sample 
  TFTP 
  

           HTTP   
          Image Modified

Configuring more than one profile

...

• Save
• In Rpi , make sure that you stopped the rdkbLogMontior service , in order to stop the log rotation process (systemctl stop rdkbLogMonitor)
• Now restart the dcm-log service using systemctl restart dcm-log
• With successful response , tar file and JSON file gets uploaded to the xconf-server
• Open the upload JSON file in the browser

• We could see the profile entries with the number of times the specified marker has appeared in the file.

  Sample: {"searchResult":[{"Firewall":"1"},{"Wifihealth_1":"2"},{"Wifihealth_2":"2"},{"Profile":"RDKB"},{"mac":"B8:27:EB:22:16:36"},{"erouterIpv4":"192.168.30.125"},{"erouterIpv6":"null"},{"PartnerId":"RDKM"},{"AccountId":"Unknown"},{"Version":"rdkb-generic-broadband-image_default_20200224150713"},{"Time":"2020-02-26 12:23:51"}]}

  
  

  NOTE : JSON file holds only the number of times the particular marker has appeared in the respective log file. To see the complete log file, need to download the tar file uploaded and extract the files to see the complete logs or value of the parameters