Page History

Introduction

Raspberry Pi series are low cost credit card sized single board computers.  The Raspberry Pi models feature a Broadcom SoC that includes an ARM CPU and an on chip graphics-processing unit (GPU). Raspberry Pi uses SD card that facilitates users to swap out different versions of the operating system or software updates, hence, speeding the development and testing process. This is a great way to develop new applications/software and show these to customers in remote locations or at trade shows.

Required Hardware

The equipment listed below is required for complete functionality of the standalone environment. The only devices that are tested to work properly in this solution are the specific brands and models listed below. Support for other types of equipment is not available at this time.

...

https://www.balena.io/etcher/ can be used to flash RPI image in sd card using windows 

Steps to boot Raspberry Pi with RDK image:

1. Insert the micro SD card with the flashed RDK-B image in the SD card slot of Raspberry Pi board
2. Connect a keyboard to one of the USB port of Raspberry Pi board
3. Using HDMI cable connect the Raspberry Pi board to TV/monitor
4. Connect an Ethernet cable to Raspberry Pi board
5. Plug in the power cable to boot up the Raspberry Pi device
6. After booting, you will be prompted with a login.
7. Type “root” when the login prompt is displayed