RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
Server Set-up :
XCONF side :
1.Select Download Location filter under the firmware tab in XCONF UI
2.click the edit button
3.Enter the "Location (FQDN)" field is local/Public http server (fully qualified domain name ) (ex : www.myfirmware.com)
4.Enter the "Location (full URL)" field is full location path of local/Public http server (ex : http://www.myfirmware.com)
5.Unclick the check box of Never use HTTP
6. Removed the model name from Rogue Models.
7.Removed the firmware version (If it's not updated earlier, please ignore this step).
8. click the save button.
RPI Target :
9.In DUT, please edit the following file with below format,If it's local http server
i) Open the /etc/hosts
ii) Add your local http server ip with DNS ( Ex : 192.168.0.128 www.myfirmware.com)
iii) Save the file.
Note : Every reboot, You need to add the above three steps if it's local http server.
Verify that XConf Server configuration displays the Json response from the mentioned URL:
Using the below url to view the JSON Format result of http protocol ,
http://35.155.171.121:9092//xconf/swu/stb?eStbMac=<RPI MAC ADDRESS>&model=<model_name>&capabilities=RCDL&capabilities=supportsFullHttpUrl
Verify that image file and its respective md5 checksum file is present in the http folder:
ltts40009681@CHTSL20070:/var/www/html$ ls
rdk-generic-camera-image_default_20210107140802.rootfs.wic.bz2
rdk-generic-camera-image_default_20210107140802.txt
STEP 1:
Select Download Location Filter option within common list to enter Download Location Filter page.
...
Enable Never use HTTP and select your Rongue Rogue model.
Give TFTP server running IP address to download image.
Verify that XConf Server configuration displays the Json response from the mentioned URL:
...
...