RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Table of Contents |
---|
The term "Provisioning" describes the ability to configure a Gateway with "information" that will be sent to its assets when those assets register with the Platform. The information is intended to help set up the asset for connections and communications with its managing Gateway.
...
The primary function of the eRouter device is to allow subscribers to connect multiple CPE devices to the operator provided DOCSIS high-speed Internet service. DOCSIS specifications allow subscribers to directly connect multiple CPE devices to the cable modem; however, that requires operators to provide IP provisioning to each of the CPE devices. Depending on which IP Protocols are enabled, the eRouter allows provisioning of IPv4 CPEs, IPv6 CPEs, or Dual Stack (IPv4 and IPv6) CPEs simultaneously.
...
The GW Provisioning Abstraction defines the abstracted APIs which are called by the gateway provisioning application during initialisation. It provides interfaces to be used for handshaking during DOCSIS initialisation.
...
When upstream ipv4-status notification is received, the eRouter operation mode is set to both IPv4, IPv6 or only IPv4 for IPv4 routing.
When upstream ipv6-status notification is received, the eRouter operation mode is set to both IPv4, IPv6 or only IPv6 for IPv6 routing.
This state is updated in eSafe device database to indicate that the eSAFE completed its provisioning process.
draw.io Diagram | ||||
---|---|---|---|---|
|