RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Page History
...
- RDK-B Operators
- RDK-B SoC Vendors
- RDK-B OEM's
- RDK-B Application Vendors(Plume)
- RDK-B System Integrators
High level Code Flow Design
...
Code flow for Bridgemode feature functionality
...
After boot-up
During boot-up
Supported device
- Raspberry Pi4 32 bit
- Raspberry Pi4 64 bit
Build Instructions
| Target | Yocto version | Build instruction |
|---|---|---|
| RPI4 32bit | Dunfell | RPI 4B Model Reference Platform |
| RPI4 32bit | Kirkstone | kirkstone RDK-B RPI4 32 bit |
| RPI4 64bit | Dunfell | RPI 4B Model Reference Platform with 64bit Arch |
| RPI4 64bit | Kirkstone | Kirkstone RDK-B RPI4 64 bit (Both User Space & Kernel Space) |
...
| Module | TR-181 DM Parameter | Input | Output |
|---|---|---|---|
| CcspPandM | Device.X_CISCO_COM_DeviceControl.LanManagementEntry.1.LanMode | bridge-static | To disable router mode functionalities and enable bridge mode functionalities in RPI Router. It means ,Private WIFI will stop its broadcasting, Ethernet Client should get public IP address (in erouter series) and Wireless client will lose its connection to private WIFI. |
| CcspPandM | Device.X_CISCO_COM_DeviceControl.LanManagementEntry.1.LanMode | router | Change from bridge mode to router mode and verify basic functionality is working fine like internet connectivity for wifi and ethernet clients and also verify admin ui page is accessible. |
Supported device
...
Test Procedure
...
Enabling BridgeMode via dmcli
To enable bridge mode run the following dmcli commands,
|
Enabling BridgeMode via WebUI
Follow the below steps to enable the bridge mode in UI,
...
- brlan0 will lose IP address
- A new bridge is created lan0(interface link llan0) which will have 10.0.0.1 ip address
- Private WiFi should stops broadcasting
- Ethernet (lan) clients should get Public IP address(i,e in erouter ip series)
- Verify whether the admin UI page is accessible by using 10.0.0.1 ip in ethernet client device
- Changing from bridgemode to router mode and verify basic functionalities are working fine like Private WiFi should be broadcasted, able to get ip & internet access for wifi and lan clients and admin UI also accessible in connected clients.
RPI Test Results
Router → Bridge-Static
- Changing the LanMode from router to bridge-static mode
2. A new bridge is created lan0(interface link llan0) which will have 10.0.0.1 ip address
3. Private WiFi should stops broadcasting
4.Ethernet (lan) clients should get Public IP address(i,e in erouter ip series)
5. Verify whether the admin UI page is accessible by using 10.0.0.1 ip in ethernet client device
6. brlan0 shouldn't have IP address
Bridge-Static → Router
- Changing the LanMode from bridge-static to Router Mode
2. lan0 and llan0 interfaces should be deleted
3.Private WiFi Should be broadcasted
4. WiFi and Lan connected clients should get IP address and internet access
5.Admin UI should be accessible via connected clients.
6.brlan0 should have IP address
Tested Image details,
References
Ticket details
| Jira | ||||||
|---|---|---|---|---|---|---|
|
| Jira | ||||||
|---|---|---|---|---|---|---|
|
| Jira | ||||||
|---|---|---|---|---|---|---|
|
Code review links
https://code.rdkcentral.com/r/q/topic:%22RPI_BRIDGEMODE%22
...
Overview
Community Forums
Content Tools
Tasks