RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
→ RPI will support only tftp protocol . No http protocol support is provided yet
1) Create Environment
2) Create Model
3) Create MAC list by entering the MAC address of Rpi board
4) Create the Firmware Configuration by providing Firmware Description, File name as Image name to be downloaded from Xconf server, and version is the same image name without the extension (.rootfs.rpi-sdimg) and select Model(ex. RPI_BB) form the listed Models
5) Create MAC rule by providing rule name, Build condition is eStbMac, choose the option IN_LIST and for next field, select the MAC list created for RPi board, verify that based on the MAC list selection, Firmware Config will be automatically displayed under Action section.
6) Go to Download Location Round Robin Filter page and click on Edit. Provide Location and full http location as mentioned in the snapshot below. Select the option "Never use HTTP". Select the Rogue model from the models displayed in the section (ex. RPI, RPI_BB). Verify that Firmware versions are displayed based on the selected Rogue models.
...
http://<Xconf Server IP:port no.>/xconf/swu/stb?eStbMac=<MAC address of Rpi board>
For ex. http://34.219.243.214:9092/xconf/swu/stb?eStbMac=B8:27:EB:F6:70:8C
Configure tftp server and keep the image file and reapective md5 checksum file inside tftp folder. Example given below:
1.Verify the content of tftp file (use vi /etc/xinetd.d/tftp command)
service tftp
{
protocol = udp
port = 69
socket_type = dgram
wait = yes
user = nobody
server = /usr/sbin/in.tftpd
server_args = -c -v -s /home/amrita/tftphome
disable = no
}
2. Verify the content of tftpd-hpa:
# /etc/default/tftpd-hpa
TFTP_USERNAME="tftp"
TFTP_DIRECTORY="/home/amrita/tftphome/"
TFTP_ADDRESS="0.0.0.0:69"
TFTP_OPTIONS="-s -c -1"
3. Verify the tftp folder location:
...