...
Code Block |
---|
|
# Insert the micro SD card and mention the card's device file name
# input file (if) is the image file to flash and the output file (of) is the card's device file name
sudo dd if=rdk-generic-mediaclient-wpe-image-raspberrypi-rdk-mc.rpi-sdimg of=/dev/<sd file> bs=4M |
Supported Service Status
S.No | Supported Plugins | Total Test Cases | PASS Count | FAIL Count | Not Tested |
---|
1 | Controller menu | 1 | 1 | 0 |
|
2 | Device Info | 1 | 1 | 0 |
|
3 | Display Info | 1 | 0 | 1 |
|
4 | HTMLApp NEW |
|
|
|
|
5 | Location Sync | 1 | 0 | 1 |
5678910111213
|
14 | SearchandDiscoveryApp NEW | 1 | 1 | 0 |
1415
|
16 | com.comcast.StateObserver | 1 | 0 | 1 |
1617
|
18 | org.rdk.ActivityMonitor |
631816 | 13 | 3 | | 21 | 17 | 4 |
|
20 | org.rdk.ContinueWatching | 1 | 0 | 1 |
|
21 | org.rdk.dataCapture | 2 | 1 | 1 |
|
22 |
19413011203212223
|
26 | org.rdk.LoggingPreferences | 3 | 2 | 1 |
24252629 | org.rdk.ScreenCapture | 2 | 1 | 1 |
272829
|
32 | org.rdk.UserPreferences | 3 | 2 | 1 |
303132
|
35 | org.rdk.Xcast | 4 | 3 | 1 |
|
Total | 192 | 99 | 93 |
|
Known Issues
- No pair or connection of Bluetooth devices from UI
- Bluetooth connected device is failed to disconnect from the box when requesting a JSON RPC command.
- Wifi connection is established through JSON RPC commands but once the device connected to the wifi network, no ssh terminals, and controller UI are failed to load from Ethernet IP
- If no internet connection to the box (either through Ethernet or Wifi), no App UI displayed on the TV output
- The on-screen console is visible on UI's App/page transition
- As the RDK Reference (Resident) App's script has 45 seconds of sleep function, it will be elapsed for this time after bootup to display the UI
- OK key on remote not functional
...
Please refer to the below link for the System Test report.
...
...