RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
...
if any additional installation required for reference board, etc.
The equipment listed below is required for complete functionality of the standalone environment. The only devices that are tested to work properly in this solution are the specific brands and models listed below. Support for other types of equipment is not available at this time.
RPI 3B
RPI 3B+
In order to install Repo make sure you have a /bin directory in your home directory and that it is included in your pat
Code Block | ||||
---|---|---|---|---|
| ||||
$ mkdir ~/bin
$ PATH=~/bin:$PATH
Download the repo tool and ensure that it is executable
$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
$ chmod a+x ~/bin/repo |
Note: it is also recommended to put credentials in .netrc when interacting with repo.
A sample .netrc file is illustrated below
Code Block | ||||
---|---|---|---|---|
| ||||
machine code.rdkcentral.com
login YOUR_USERNAME
password YOUR_PASSWORD |
To build, follow below instructions
Build Steps
Code Block | ||||
---|---|---|---|---|
| ||||
$ mkdir <workspace dir>
$ cd <workspace dir>
$ repo init -u https://code.rdkcentral.com/r/manifests -b rdk-next -m manifest.xml
$ repo sync -j4 --no-clone-bundle
$ source meta-cmf-raspberrypi/setup-environment (Select option raspberrypi-rdk-broadband.conf)
$ bitbake <image> |
Note : RPI-3 B and B+ have same Build instructions and testing procedure
Following command can be used to flash the RPI image to sd card using linux machine . dd tool should be available in linux
Code Block | ||||
---|---|---|---|---|
| ||||
sudo dd if=<path to ImageName.rpi-sdimg> of=<path to SD card space> bs=4M
Example:
$ sudo dd if=rdk-generic-broadband-image-raspberrypi-rdk-broadband.rpi-sdimg of=/dev/sdb bs=4M |
https://www.balena.io/etcher/ can be used to flash RPI image in sd card using windows