RDK-B_20170213

This is the summary page that describes the CMF RDK-B iteration rdkb-20170213.

Below are links to the relevant documents for the release.

RDK-B 20170213 Emulator Report (Gerrit)
A detailed changelog since the last iteration (RDK-B_20170130) can be found here (Gerrit).

For the Gerrit links, you need to log in before you will be able to see the contents.

The latest RDK-B release addresses licensing issues so users are advised to move to the latest release.

Baseline	CMF-20170213	2017-02-13 baseline.
Post-baseline updates
TDK	M44	https://rdkwiki.com/rdk/display/TDK/TDK+Release+M44
Manifest	rdkb-20170213

New components: None.
Components updated:
- CcspCommonLibrary, CcspLMLite, CcspMoCA, CcspMtaAgent, CcspPandM, CcspTr069Pa, CcspWifiAgent, TestAndDiagnostic, Utopia, hal, sysint, webui.
Patches updated: None.
Community contributions:
- 6528 RDKCOM-35 Enabling Lan/Wan connectivity for Raspberry Pi platform.

$ mkdir rdkb
$ cd rdkb
$ repo init -u https://code.rdkcentral.com/r/manifests -m rdkb.xml -b rdkb-20170213
$ repo sync -j4 --no-clone-bundle

The -m rdkb.xml in the build sequence above is important. If this is not specified, you will get an RDK-V tree by default.
The -b rdkb-20170213 in the build sequence above specifies the branch to use. If you omit the -b rdkb-20170213 entirely, you will get the master (HEAD) of each component.
At any time, the community can build latest master by dropping the -b rdkb-20170213 option in the repo init command.
We have verified that this iteration boots to a login prompt and that you can log in, and that you can connect with a web browser to the web admin page.

$ source meta-cmf-rdkb-bsp-emulator/setup-environment (select qemux86broadband)
$ bitbake rdk-generic-broadband-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-image-qemux86broadband.vmdk

Follow the steps as for a normal build, above, but use the following bitbake command:

$ bitbake rdk-generic-broadband-tdk-image

The image path will be: build-qemux86broadband/tmp/deploy/images/qemux86broadband/rdk-generic-broadband-tdk-image-qemux86broadband.vmdk

Start VirtualBox.
Click New -> Enter name -> Select type Linux -> Select version Other Linux (32 bit) -> Click Next
Select Memory size - 512MB -> Click Next
Select option Use an existing virtual hard drive -> Select the built image above -> Click Create
Once the VM has been created, select the new image and click Settings -> Network -> Select Attached to: 'Bridged Adapter' -> Click Ok
Click Start.This will bring up the emulator with the initial splash screen

CMF