RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Total Test Cases: 56
SI NO | Automation ID | Steps | Sub Feature | Summary |
1 | TC-RDKB-PC-MNG-SITE-1002 | 12 | Parental Control | Verify internet access to the part of keyword added to manages sites are accessible in Wi-Fi. |
2 | TC-RDKB-IPV4-DEFAULT_ENCRY-2053 | 9 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | To Verify 2.4GHz: Default SSID, Protection mode and encryption mode. |
3 | TC-RDKB-IPV4-GATEWAYIP-2013 | 3 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | To validate if an error message is displayed when gateway address is set to outside of the range. |
4 | TC-RDKB-IPV4-HOSTNAME-2019 | 5 | Client connectivity - under different values for wifi parameters | To validate if 2 Wi-Fi LAN connected devices can communicate via host name. |
5 | TC-RDKB-IPV4-NETACCESS-2033 | 5 | Client connectivity - under different values for wifi parameters | To verify the device must be able to connect 2.4GHz Wi-Fi and Internet should work. |
6 | TC-RDKB-IPV4-BOOTTIME-2039 | 4 | Boot Time | To verify the Boot Time of the device is less than 5 MIN (300s) |
7 | TC-RDKB-IPV4-DHCP-2054 | 2 | DHCP - different scenarios | The DHCP settings should not allow user to set same DHCP Pool MinAddress and MaxAddress- max CPE as One. |
8 | TC-RDKB-IPV4-MAC_FILTER-2056 | 7 | Mac Filtering | Wi-Fi MAC Filter - Allow. |
9 | TC-RDKB-IPV4-PORTFW-2052 | 15 | Iperf testing | Verify Wired performance (TCP) test on WAN to LAN side (Smoke). |
10 | TC-RDKB-WIFI-PWR-1006 | 9 | Wifi power level testing | Test to verify WiFi power tables |
11 | TC-RDKB-PC-MANAGE-DEVICE-1000 | 16 | Parental Control | Test to verify the wireless client connected to 2.4 GHz Private Wi-Fi network is blocked for all days & for particular time period |
12 | TC-RDKB-OneWiFi-1000 | 8 | Onewifi | Validate client connectivity with 6GHz, 5GHz High, 5GHz Low bands in OneWifi |
13 | TC-RDKB-CC-MODE-CHANGE-5002 | 23 | Iperf testing | Verify the internet connectivity and iperf traffic when client mode is set to 'g' for 2.4 GHz and 'a' for 5 GHz. |
14 | TC-RDKB-WIFI-SANITY-1002 | 16 | Wifi sanity tests | Verify the connectivity of 5ghz wifi on different configurations. |
15 | TC-RDKB-WIFI-WHIX-6001 | 8 | Connection performance test - 2.4,5 | Validate the 2.4G Utilization with Increased Population of Devices |
16 | TC-RDKB-WIFI-LATENCY-CLIENT-1001 | 6 | Wifi Latency Test | Coverage Improvement for Latency in Wifi clients |
17 | TC-RDKB-WIFI-1011 | 6 | default SSID , password - SNMP, WEBPA, DMCLI | Verify default SSID on devices using SNMP |
18 | TC-RDKB-WIFI-ATM-1002 | 4 | Airtime management | Validate AirTimeManagement by Assigning Percentages to the Stations added via dmcli. (2.4Ghz) |
19 | TC-RDKB-WIFI-1010 | 6 | default SSID , password - SNMP, WEBPA, DMCLI | Verify default SSID using WebPA |
20 | TC-RDKB-DEF-SSID-5005 | 4 | default SSID , password - SNMP, WEBPA, DMCLI | Cross-verify the Default Private Wi-Fi SSID and password retrieved from WebPA with the configurations from SNMP |
21 | TC-RDKB-WIFI-ATM-1001 | 3 | Airtime management | Validate AirTimeManagement by Assigning Values at APGroup Level |
22 | TC-RDKB-WIFI-5020 | 4 | default SSID , password - SNMP, WEBPA, DMCLI | Test to verify the default number of allowed clients for PublicWiFi Secure and open SSID using WebPA. |
23 | TC-RDKB-WIFI-POSSIBLE-CHANNELS-1001 | 4 | radio parameters check - 2.4, 5 | Verify that WIFI radio does not support channel number other than the possible channels defined |
24 | TC-RDKB-WIFI-2002 | 6 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | Enable/Disable Broadcast SSID for 5 Ghz WiFi network and verify disabled status |
25 | TC-RDKB-WIFI-2001 | 6 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | Enable/Disable Broadcast SSID for 2.4 Ghz WiFi network and verify disabled status |
26 | TC-RDKB-WIFI-CHNL-CONFIG-5072 | 20 | Client connectivity - under different values for wifi parameters | Verify Client Connectivity to 2.4GHz bands with Channel Selection Mode is Manual |
27 | TC-RDKB-WIFI-4001 | 10 | Ping connectivity - IPv4,IPv6,2.4,5 | Ping via IPV4 and IPV6 on 2.4GHz when 5GHz is disabled. |
28 | TC-RDKB-WIFI-4002 | 10 | Ping connectivity - IPv4,IPv6,2.4,5 | Ping via IPV4 and IPV6 on 5GHz when 2.4GHz is disabled. |
29 | TC-RDKB-WIFI-4003 | 12 | Dual Band Radio | Test to verify that LAN side wireless CPE gets an IP address when dual radio bands(2.4GHZ and 5 GHZ) are enabled in CM |
30 | TC-RDKB-WIFI-5011 | 14 | Controlled User Access | This test case is to verify the controlled user access (Allow All) to the Specific Device for 2.4 and 5 GHZ against different MAC addresses by way of MAC ACLs |
31 | TC-RDKB-WIFI-4004 | 20 | Dual Band Radio | Enable/Disable both 2.4GHz, and 5Ghz and confirm Client connects/disconnects successfully |
32 | TC-RDKB-WIFI-4005 | 16 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | Verify Security Mode for WiFi access bands (2.4 and 5 GHz) |
33 | TC-RDKB-WIFI-2GHZ-DHCP-IPV4-DSBLE-5001 | 5 | DHCP - different scenarios | Verify the IP range in 2.4GHZ WiFi connected client when DHCP Server disabled. |
34 | TC-RDKB-WIFI-CON-PERF-1000 | 5 | Connection performance test - 2.4,5 | Find out the successful Wi-Fi connectivity rate of 2.4GHz radio band with 10 times in Wireless Gateway |
35 | TC-RDKB-WIFI-CON-PERF-1001 | 5 | Connection performance test - 2.4,5 | Find out the successful Wi-Fi connectivity rate of 5GHz radio band with 10 times in Wireless Gateway |
36 | TC-RDKB-WIFI-CON-PERF-1002 | 2 | Connection performance test - 2.4,5 | Find out the average mean time for Wi-Fi connection establishment of 2.4GHz radio band with 20 times |
37 | TC-RDKB-WIFI-CON-PERF-1003 | 2 | Connection performance test - 2.4,5 | Find out the average mean time for Wi-Fi connection establishment of 5GHz radio band with 20 times |
38 | TC-RDKB-WIFI-KEY-PHARSE-5002 | 14 | Password - Security, updation | Verify that the passphrase key of WIFI access point can be updated for 5 Ghz |
39 | TC-RDKB-WIFI-RESET-1002 | 17 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | Verify WiFi status after disabling |
40 | TC-RDKB-WIFI-RADIO-5001 | 25 | Client connectivity - under different values for wifi parameters | Verify that Wi-Fi connectivity of 2.4GHz frequency is not affected when 5GHz frequency Radio is disabled |
41 | TC-RDKB-WIFI-BAND-STEERING-1004 | 3 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | Verify Set or Get PhyRate threshold for 5GHz band to initiate Steering using TR69 data objects |
42 | TC-RDKB-WIFI-BAND-STEERING-1005 | 3 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | Verify Set or Get PhyRate threshold for 2.4GHz band to initiate Steering using TR69 data objects |
43 | TC-RDKB-WIFI_BLASTER-1001 | 13 | Factory Reset | Test to verify Default values after factory reset and value persistent after reboot |
44 | TC-RDKB-WIFI-RESTORE-1002 | 19 | Wifi Reset testing | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using SNMP command for doing WIFI settings reset. |
45 | TC-RDKB-WIFI-RESTORE-1001 | 21 | Wifi Reset testing | Verify WiFi settings like SSID ,Network Security mode,Channel Selection Mode,Channel bandwidth,Network name enabled status,Guard interval ,Network active status,Supported Protocols,Radio Status and Radio Channel can be restored to default settings using webpa command for doing WIFI settings reset |
46 | TC-RDKB-WIFI-RESET-1001 | 17 | Wifi Reset testing | Verify WiFi status after disabling and enabling |
47 | TC-RDKB-WIFI-KEY-PHARSE-5001 | 14 | default SSID , password - SNMP, WEBPA, DMCLI | Verify 2.4 GHz SSID is enabled |
48 | TC-RDKB-WIFI-CC-OPEN-5001 | 16 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | Verify WG supports Open Security mode for 2.4 &5 GHZ frequency band |
49 | TC-RDKB-WIFI-CHNL-CONFIG-5073 | 18 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | Verify Client Connectivity to 5GHz bands with Channel Selection Mode is Manual |
50 | TC-RDKB-WIFI-CC-WPA2-5001 | 22 | 2.4, 5 - Common configurations (Channel, Security modes, Autochannel selection) | Verify WG supports WAP2(AES) Security mode for 2.4 &5 GHZ frequency band with valid & invalid key passpharse |
51 | TC-RDKB-WIFI-5053 | 10 | Wifi power level testing | Verify the reduction in power level of 2.4GHz WiFi Access Point does not impact the non-management frames |
52 | TC-RDKB-WIFI-5054 | 10 | Wifi power level testing | Verify the reduction in power level of 5GHz WiFi Access Point does not impact the non-management frames. |
53 | TC-RDKB-WIFI-2050 | 6 | Client connectivity - under different values for wifi parameters | Verify that Wi-Fi connectivity of 5 GHz frequency SSID is not affected when 2.4 GHz frequency SSID is disabled |
54 | TC-RDKB-BSSID-PERSIST-1001 | 10 | Factory Reset | Test to validate the private 24/5ghz_Verify BSSID remains same after Factory Reset |
55 | TC-RDKB-WIFI-SECTY-OPEN-5001 | 58 | Client connectivity - under different values for wifi parameters | Verify the WIFI Connectivity on Dual Band Radio for Client for 2.4 and 5 Ghz with security mode open |
56 | TC-RDKB-ST-AUT-5002 | 6 | Speed Test | Test to verify the speed test feature of Broadband device for ipv6 interface |