RDK Reference Platform Release - M4

Version: 1.0
2nd May 2018 


RDK MANAGEMENT, LLC CONFIDENTIAL AND PROPRIETARY
This file (and its contents) are the intellectual property of RDK Management, LLC.
It may not be used, copied, distributed or otherwise disclosed in whole or in part without the express written permission of RDK Management, LLC. Copyright (c) 2014 RDK Management, LLC. All rights reserved.



Contents


Introduction



This Release Notes document details on the delivery version M4 for the RDK Reference Platform to the RDK Community

  1. Release Feature Information
  2. Software and Hardware requirements to build
  3. Known limitations
  4. Updated Platform Tickets

Release Information



Below are the list of release features supporting R-Pi platform


Si.NoFeatureDeviceProfileRemarks/TicketsTickets
1Multi Boot and Multi Output Port DisplayRPIVideo/Broadband
  • Multi booting will enable installation of multiple os's on single SDcard. Required image can be booted after installation
  • Multi output port display- HDMI,A/V composite ports support
2Universal IR Receiver, Remote SupportRPIVideo
  • Supports common remote and IR receiver on RDK-Video targets for the community from different locations across the globe
3Boot chart in WebUIRPIBroadband
  • Bootchart is available now in WebUI under Troubleshooting menu
4Community,TDK TicketsRPI/Emulator

RDKV Issues - REFPLTV-124,REFPLTV-127,REFPLTV-123,REFPLTV-133,REFPLTV-128,REFPLTV-100,REFPLTV-98,REFPLTV-93,REFPLTV-113,REFPLTV-130,REFPLTV-120,REFPLTV-92,REFPLTV-96,REFPLTV-135,REFPLTV-131

RPI RDKB Issues - REFPLTB-40, REFPLTB-128, REFPLTB-4, REFPLTB-125, REFPLTB-41, REFPLTB-129, REFPLTB-130, REFPLTB-131, REFPLTB-142, REFPLTB-155, REFPLTB-157, REFPLTB-158, REFPLTB-159, REFPLTB-160,REFPLTB-166, REFPLTB-169, REFPLTB-151, REFPLTB-134, REFPLTB-135,REFPLTB-7, REFPLTB-34,REFPLTB-161, REFPLTB-170, REFPLTB-135

Emulator RDKB Issues - RDKBEMU-691,RDKBEMU-678,RDKBEMU-664,RDKBEMU-643,RDKBEMU-663,RDKBEMU-686,RDKBEMU-638,RDKBEMU-688,RDKBEMU-606,RDKBEMU-558,RDKBEMU-692, RDKBEMU-675


Hardware and Software Requirements


Supported software and hardware

  • Raspberry PI 3 target board
  • Preferred 2.4GHZ WIFI adapter for Emulator: Tenda 150Mbps Wireless PICO USB Adapter with RT5370 chipset (W311MI)
  • Preferred 5GHZ WIFI adapter for Emulator:  TP-Link AC1200 Wireless Dual Band USB Adapter (Archer T4U)
  • USB to Ethernet
  • Desktop PCs
  • Morty Branch for all platforms except RNE (daisy)
  • MPEG2 Licence - To play mpeg2 format.

Known Issues and Limitations


RDKB on RPI:

1) On boot-up, not getting captive portal on wired and wireless clients. Only black screen is seen. With local fix, black screen issue gets resolved and able to continue testing
2) On boot-up, when connecting through Remote management, it displays webui instead of captive portal
3) Cannot enable Managed devices in parental control. Saving the stage goes back to Disabled.

RDKV on RPI:

1) In Multi Boot and Multi Output Port Display, if AV mode is chosen, the display will not fit to screen.
2) In both wpe/westeros images of Hybrid and Mediaclient, pxscene does not launch due to version upgrade
3) In both wpe/westeros images of Hybrid and Mediaclient, Reboot gives blank screen for more than 20 seconds, after which box reboots.

Project Documentation


Below are the list of supporting documents that are part of release



1User Feature ManualThe user manual consists of procedure to test the particular feature
2System Testplan & Test Report
  • Multiple test cases and test results are being captured
3Feature Design Approach DocAn high level design document which explains the design flow of each and every feature
4Release NotesRelease Notes -This document
5Requirement Traceability TableThis document tracks the requirement/feature from end to end (For Eg: from design,coding,testing,documentation are tracked for an particular feature. This enables the user to have a quick references of a particular feature


Technical Support contact



REFPLTB-151

  • No labels