Page History

...

• WI-fI HAL is used for the RDK-Broadband Wifi radio hardware abstraction layer.
• Latest version of RDKB supports 300+ Wi-Fi HAL API’s.
• Based on how Wi-Fi vendor exposes their driver capabilities in user space, the HAL API’s can be implemented in wifi_hal.c
• Some of the APIs are : 
  1. wifi_getRadioChannelStats
  2. wifi_getRadioChannelStats2
  3. wifi_getApAssociatedDeviceRxStatsResult
  4. wifi_getApAssociatedDeviceTxStatsResult
  5. wifi_getApAssociatedDeviceTidStatsResult
  6. wifi_getApAssociatedDeviceStats
  7. wifi_getHalVersion
  8. wifi_factoryReset
  9. wifi_factoryResetRadios
  10. wifi_factoryResetRadio
  11. wifi_setLED
  12. wifi_init
  13. wifi_reset
  14. wifi_down
  15. wifi_createInitialConfigFiles
  16. wifi_getRadioCountryCode
  17. wifi_setRadioCountryCode
  18. wifi_pushCountryCode
  19. wifi_getATMCapable
  20. wifi_setATMEnable

• To see the API specification of WI-fI HAL please refer - Wi-Fi HAL APIs

MOCA HAL

All HAL functions prototypes and structure definitions are available in moca_hal.h file.

• MoCA HAL is used for the RDK-Broadband MoCA hardware abstraction layer.
• An abstraction layer, mainly for interacting with MoCA driver.
• The APIs are : 
  1. moca_GetIfConfig
  2. moca_SetIfConfig
  3. moca_IfGetDynamicInfo
  4. moca_IfGetStaticInfo
  5. moca_IfGetStats
  6. moca_GetNumAssociatedDevices
  7. moca_IfGetExtCounter
  8. moca_IfGetExtAggrCounter
  9. moca_GetMocaCPEs
  10. moca_GetAssociatedDevices
  11. moca_FreqMaskToValue
  12. moca_HardwareEquipped
  13. moca_GetFullMeshRates
  14. moca_GetFlowStatistics
  15. moca_GetResetCount
  16. moca_setIfAcaConfig
  17. moca_getIfAcaConfig
  18. moca_cancelIfAca
  19. moca_getIfAcaStatus
  20. moca_getIfScmod
• To see the API specification of MoCA HAL please refer - MoCA HAL APIs

MTA HAL

All HAL functions prototypes and structure definitions are available in mta_hal.h file. An MTA can deliver Home Phone service in addition to High Speed Internet.

• MTA HAL used for the RDK-Broadband hardware abstraction layer for Cable Modem.
• An abstraction layer, implemented to interact with MTA device.
• mta_hal.c file provides the function call prototypes and structure definitions used for the MTA hardware abstraction layer.
• Some of the APIs are : 
  1. mta_hal_InitDB
  2. mta_hal_GetDHCPInfo
  3. mta_hal_LineTableGetNumberOfEntries
  4. mta_hal_LineTableGetEntry
  5. mta_hal_TriggerDiagnostics
  6. mta_hal_GetServiceFlow
  7. mta_hal_DectGetEnable
  8. mta_hal_DectSetEnable.
  9. mta_hal_DectGetRegistrationMode
  10. mta_hal_DectSetRegistrationMode
  11. mta_hal_DectDeregisterDectHandset
  12. mta_hal_GetCalls
  13. mta_hal_GetDect
  14. mta_hal_GetDectPIN
  15. mta_hal_SetDectPIN
  16. mta_hal_GetHandsets
  17. mta_hal_GetCALLP
  18. mta_hal_GetDSXLogs
  19. mta_hal_GetDSXLogEnable
  20. mta_hal_SetDSXLogEnable
• To see the API specification of MTA HAL please refer - MTA HAL APIs 

CM HAL

All HAL functions prototypes and structure definitions are available in cm_hal.h file.

• CM HAL is used for the RDK-Broadband hardware abstraction layer for Cable Modem.
• It provides interface that cable modem software developers can use to interface to RDK-B.
• Some of the APIs are : 
  1. cm_hal_InitDB
  2. docsis_InitDS
  3. docsis_InitUS
  4. docsis_getCMStatus
  5. docsis_GetDSChannel
  6. docsis_GetUsStatus
  7. docsis_GetUSChannel
  8. docsis_GetDOCSISInfo
  9. docsis_GetNumOfActiveTxChannels
  10. docsis_GetNumOfActiveRxChannels
  11. docsis_GetErrorCodewords
  12. docsis_SetMddIpModeOverride
  13. docsis_GetMddIpModeOverride
  14. docsis_GetUSChannelId
  15. docsis_SetUSChannelId
  16. docsis_GetDownFreq
  17. docsis_SetStartFreq
  18. docsis_GetDocsisEventLogItems
  19. cm_hal_GetDHCPInfo
  20. cm_hal_GetCPEList
• To see the API specification of CM HAL please refer - CM HAL APIs

Ethernet Switch HAL 

All HAL functions prototypes and structure definitions are available in ccsp_hal_ethsw.h file.

...

• To see the API specification of Ethernet Switch HAL please refer - Ethernet Switch HAL APIs

DHCPv4C HAL 

All HAL functions prototypes and structure definitions are available in dhcpv4c_api.h file.

• DHCPv4C HAL is used for the RDK-B DHCPv4 Client Status abstraction layer.
• DHCPv4C HAL API's functionality should be implemented by OEMs.
• dhcpv4c_api.c provides the function call prototypes and structure definitions used for the RDK-Broadband DHCPv4 Client Status abstraction layer.
• Some of the APIs are : 
  1. dhcpv4c_get_ert_lease_time
  2. dhcpv4c_get_ert_remain_lease_time
  3. dhcpv4c_get_ert_remain_renew_time
  4. dhcpv4c_get_ert_remain_rebind_time
  5. dhcpv4c_get_ert_config_attempts
  6. dhcpv4c_get_ert_ifname
  7. dhcpv4c_get_ert_fsm_state
  8. dhcpv4c_get_ert_ip_addr
  9. dhcpv4c_get_ert_mask
  10. dhcpv4c_get_ert_gw
  11. dhcpv4c_get_ert_dns_svrs
  12. dhcpv4c_get_ert_dhcp_svr
  13. dhcpv4c_get_ecm_lease_time
  14. dhcpv4c_get_ecm_remain_lease_time
  15. dhcpv4c_get_ecm_remain_renew_time
  16. dhcpv4c_get_ecm_remain_rebind_time
  17. dhcpv4c_get_ecm_config_attempts
  18. dhcpv4c_get_ecm_ifname
  19. dhcpv4c_get_ecm_fsm_state
  20. dhcpv4c_get_ecm_ip_addr
• To see the API specification of DHCPv4C HAL please refer - DHCPv4C HAL APIs

VLAN HAL

All HAL functions prototypes and structure definitions are available in vlan_hal.h file.

• VLAN HAL is or the RDK-B Broadband VLAN abstraction layer.
• VLAN HAL layer is intended to support VLAN drivers through the System Calls.
• The APIs are : 
  1. vlan_hal_addGroup
  2. vlan_hal_delGroup
  3. vlan_hal_addInterface
  4. vlan_hal_delInterface
  5. vlan_hal_printGroup
  6. vlan_hal_printAllGroup
  7. vlan_hal_delete_all_Interfaces
  8. _is_this_group_available_in_linux_bridge
  9. _is_this_interface_available_in_linux_bridge
  10. _is_this_interface_available_in_given_linux_bridge
  11. _get_shell_outputbuffer
  12. insert_VLAN_ConfigEntry
  13. delete_VLAN_ConfigEntry
  14. get_vlanId_for_GroupName
  15. print_all_vlanId_Configuration
• To see the API specification of VLAN HAL please refer - VLAN HAL APIs

Firewall HAL

All HAL functions prototypes and structure definitions are available in hal_firewall.h file.

...

• To see the API specification of Firewall HAL please refer - Firewall HAL APIs

DPOE HAL

All HAL functions prototypes and structure definitions are available in dpoe_hal.h file.

• DPOE HAL is used for the RDK-Broadband DPoE hardware abstraction layer as per the DPoE-SP-OAMv1.0-I08-140807 specification.
• Some of the APIs are : 
  1. dpoe_getOnuId
  2. dpoe_getFirmwareInfo
  3. dpoe_getEponChipInfo
  4. dpoe_getManufacturerInfo
  5. dpoe_getNumberOfNetworkPorts
  6. dpoe_getNumberOfS1Interfaces
  7. dpoe_getOnuPacketBufferCapabilities
  8. dpoe_getOamFrameRate
  9. dpoe_getLlidForwardingState
  10. dpoe_getDeviceSysDescrInfo
  11. dpoe_getMaxLogicalLinks
  12. dpoe_setResetOnu
  13. dpoe_getStaticMacTable
  14. dpoe_getEponMode
  15. dpoe_getDynamicMacAddressAgeLimit
  16. dpoe_getDynamicMacLearningTableSize
  17. dpoe_getDynamicMacTable
  18. dpoe_getStaticMacTable
  19. dpoe_getMacLearningAggregateLimit
  20. dpoe_getOnuLinkStatistics
• To see the API specification of DPOE HAL please refer - DPOE HAL APIs

Bluetooth HAL

All HAL functions prototypes and structure definitions are available in bt_hal.h file.

• The APIs are : 
  1. ble_Enable
  2. ble_GetStatus
• To see the API specification of Bluetooth HAL please refer - Bluetooth HAL APIs

MSO Management HAL

All HAL functions prototypes and structure definitions are available in mso_mgmt_hal.h file.

• MSO Management HAL is used for the RDK-Broadband hardware abstraction layer for MSO Management.
• The APIs are : 
  1. mso_pwd_ret_status mso_validatepwd
  2. mso_set_pod_seed
  3. mso_get_pod_seed
• To see the API specification of MSO Management HAL please refer - MSO Management HAL APIs

Voice HAL

All HAL functions prototypes and structure definitions are available in voice_hal.h file.

• Voice HAL is used for the RDK-Broadband hardware abstraction layer for VoIP.
• Some of the APIs are : 
  1. voice_hal_Init
  2. voice_hal_InitDB
  3. voice_hal_Deinit
  4. voice_hal_DeinitDB
  5. voice_hal_setVoiceProcessState
  6. voice_hal_getVoiceProcessState
  7. voice_hal_getVoiceProcessStatus
  8. voice_hal_getConfigSoftwareVersion
  9. voice_hal_getCountProfiles
  10. voice_hal_getServiceVersion
  11. voice_hal_getCountServices
  12. voice_hal_getCountLines
  13. voice_hal_getCountPhyInterfaces
  14. voice_hal_setIpAddressFamily
  15. voice_hal_getBoundIfName
  16. voice_hal_setBoundIfName
  17. voice_hal_setIpAddressFamily
  18. voice_hal_getIpAddressFamily
  19. voice_hal_setLinkState
  20. voice_hal_setIpWanAddress
• To see the API specification of Voice HAL please refer - Voice HAL APIs

WAN HAL

All HAL functions prototypes and structure definitions are available in  wan_hal.h file.

• The APIs are : 
  1. wan_hal_Init
  2. wan_hal_SetSelfHealConfig 
  3. wan_hal_SetWanConnectionEnable
  4. wan_hal_SetSelfHealConfig
  5. wan_hal_GetWanOEUpstreamCurrRate
  6. wan_hal_GetWanOEDownstreamCurrRate 
  7. wan_hal_SetQoSConfiguration
  8. wan_hal_RestartWanService
• To see the API specification of WAN HAL please refer - WAN HAL APIs

TR69_TLV HAL

All HAL functions prototypes and structure definitions are available in Tr69_Tlv.h file.

...

To see the API specification of Platform HAL please refer - Platform HAL APIs