RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Establish To establish the connection - RPI and GenieACS Server
...
, Follow the below link
TR-069 Support for RDKB RPI Reference Platform
In devices tab, under 'device parameters' you can find all parameters (according to the specifications (e.g. TR-069, TR-098 etc.) where request sent from CPE to ACS and stored in the database.
For Example, Below are the few DataParamters and the respective Output in the GenieACS UI.
S.No | DataParameter | Output |
---|---|---|
Device.DeviceInfo.HardwareVersion | a020d3 | |
2. | Device.DeviceInfo.SoftwareVersion | rdkb-generic-broadband-image_default_20210120043953 |
3. | Device.DeviceInfo.Manufacturer | Raspberry Pi Foundation |
4. | Device.DeviceInfo.ManufacturerOUI | 0xFFFFFFFF |
5. | Device.DeviceInfo.SerialNumber | 000000004bb48eba |
6. | Device.DeviceInfo.ModelName | ARMv7 Processor rev 4 (v7l) |
7. | Device.DeviceInfo.X_COMCAST-COM_CM_MAC | B8:27:EB:B4:8E:BA |
8. | Device.ManagementServer.ConnectionRequestURL | http://10.78.151.244:7547/ |
9. | Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.SyndicationFlowControl.Enable | false |
10. | Device.DeviceInfo.MemoryStatus.Total | 927 |
Lets consider, Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.SyndicationFlowControl.Enable is set to 'false' initially,
Select the respective parameter and change its value to 'true' and commit the task to be performed.
Once the value gets reflected in the GenieACS UI, cross verify in the RPI for the change.
Code Block | ||||
---|---|---|---|---|
| ||||
root@RaspberryPi-Gateway:~# dmcli eRT getv Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.SyndicationFlowControl.Enable
CR component name is: eRT.com.cisco.spvtg.ccsp.CR
subsystem_prefix eRT.
getv from/to component(eRT.com.cisco.spvtg.ccsp.pam): Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.SyndicationFlowControl.Enable
Execution succeed.
Parameter 1 name: Device.DeviceInfo.X_RDKCENTRAL-COM_RFC.Feature.SyndicationFlowControl.Enable
type: bool, value: true |
Only Limited Data parameters are validated