Versions Compared

Old Version 6

changes.mady.by.user Z-Gayathri

Saved on

compared with

New Version 7

changes.mady.by.user Z-Gayathri

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

$ sudo dd if=rdk-generic-broadband-image-raspberrypi-rdk-broadband.rpi-sdimg of=/dev/sddsdb bs=4M

The SD card is inserted to the Raspberry Pi board and booted to check for containers created.

The Raspberry Pi board is connected to the PC via a USB to serial converter and the logs can be checked in console or can be connected via HDMI cable to a TV and logs will be shown in the terminal

Test Setup Block Diagram

Z

Test Procedure

Step1: Open the Web UI on any of the Wired Client PC using Wired client's Eth0 IP Address(10 series)

Step2: Login to Web UI and go to “Connected Device” page


Step3: Verify the functionality  for “Prefer Private Connection”


Step4: Verify that Online Devices section is showing data related to presently connected wired client


Step5: Verify that Offline Device section is showing data related to offline(previously connected) wired client

Step6: Execute the dmcli command dmcli eRT getv Device.Hosts. to view the values on the various fields related to connected wired clients