RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
This page dedicated to bringing up and validation of RMS and CVR use case with bootup service file.
RMS: The RDKC Media Server is much more than a multi-format, multi-protocol server that delivers your media rich content across multiple screens and platforms. The RDK camera software runs on RPi-0/RPI-3 device. With RTSP streaming we can able to play live streaming content in VLC player.
CVR:
Refer below link to build camera image
Morty:
RDK-C Build Instruction for RPI-0
RDK-C Build Instruction for RPI-3
Dunfell:
RDK-C rdk-next Yocto 3.1 dunfell build for Raspberrypi
STEP 1:
Add require SSID and PSK in /etc/wpa_supplicant.conf file in below format
network={
ssid="username"
psk="password"
}
ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 update_config=1 network={ ssid="XXXX" psk="YYYYYYYYY" }
STEP 2:
AWS Account and IOT credential creation steps
1.AWS account is needed for to validate CVR use case. so, Refer below link to create AWS account.
Procedure To Create AWS Account
After the AWS account creation, Refer same link to create Access key ID ,Secret Access Key and Region Name of your AWS account.
2. After the AWS account creation, Need to create IOT credential with AWS CLI interface to validate CVR use case.
Use the below link to install AWS CLI interface package for to create AWS IOT credential.
Please install this AWS CLI package in your local linux pc. we can interact AWS account through our local linux pc with this AWS CLI interface.
https://docs.aws.amazon.com/cli/latest/userguide/install-cliv2-linux.html#cliv2-linux-install
Follow the below command to create config and credentials file in your local PC to interact AWS account
$ aws configure AWS Access Key ID [None]: XXXXXXXXX ( Give your AWS account Access Key ID ) AWS Secret Access Key [None]: YYYYYYYYYYYYY ( Give your AWS Secret Key ) Default region name [None]: ZZZZZZZZZZ ( Give your Region Name ) Default output format [None]: json
Oncw you done this aws configure in your local PC automatically below files will be create with below content. so, please cross check whether that is created or not
vi ~/.aws/config [default] region = ZZZZZZZZZZ output = json
vi ~/.aws/credentials [default] aws_access_key_id = XXXXXXXXX aws_secret_access_key = YYYYYYYYYYYYY
use the below link to create AWS IOT credential
https://docs.aws.amazon.com/kinesisvideostreams/latest/dg/how-iot.html
After created the IOT credential you will get below list of details
Stream Name, Default Region, IOT Credential Endpoint, Certificate key, Private Kay, Role Alias and cacertificate key
Move the certificate.pem,private.pem.key and cacert.pem keys into your RPI /etc/ssl/certs/ directory
STEP 3:
Copy certificate.pem,private.pem.key and cacert.pem keys into your RPI /etc/ssl/certs/ directory
Give AMS STREAM_NAME,AWS_DEFAULT_REGION,IOT_GET_CREDENTIAL_ENDPOINT and ROLE_ALIAS values in your RPI /usr/local/cvr/cvr.conf file
STEP 4:
Reboot the Target
After Reboot don't do step 1 to 4.
Note : Step 1 to 4 is only applicable for fresh target boot-up with new image.
STEP 1:
WiFi/Ethernet connection is must needed for validation
Check WiFi/Ethernet connection by using below command.
ifconfig
root@raspberrypi3-rdk-camera:~# ifconfig eth0 Link encap:Ethernet HWaddr B8:27:EB:87:67:91 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:89842 errors:0 dropped:0 overruns:0 frame:0 TX packets:89842 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:25639748 (24.4 MiB) TX bytes:25639748 (24.4 MiB) wlan0 Link encap:Ethernet HWaddr B8:27:EB:D2:32:C4 inet addr:192.168.43.146 Bcast:192.168.43.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:44 errors:0 dropped:0 overruns:0 frame:0 TX packets:103 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4484 (4.3 KiB) TX bytes:10216 (9.9 KiB)
STEP 2:
check loaded module by using below command
lsmod
root@raspberrypi3-rdk-camera:~# lsmod Module Size Used by bcm2835_v4l2 40563 0 v4l2_common 4809 1 bcm2835_v4l2 videobuf2_vmalloc 6264 1 bcm2835_v4l2 videobuf2_memops 1528 1 videobuf2_vmalloc videobuf2_v4l2 12640 1 bcm2835_v4l2 videobuf2_core 27389 2 bcm2835_v4l2,videobuf2_v4l2 videodev 154457 4 v4l2_common,videobuf2_core,bcm2835_v4l2,videobuf2_v4l2 media 23307 1 videodev brcmfmac 258239 0 brcmutil 7590 1 brcmfmac snd_bcm2835 21405 0 cfg80211 492836 1 brcmfmac snd_pcm 79872 1 snd_bcm2835 rfkill 19936 3 cfg80211 snd_timer 20294 1 snd_pcm snd 52949 3 snd_timer,snd_bcm2835,snd_pcm lirc_rpi 6840 0 lirc_dev 7533 1 lirc_rpi uio_pdrv_genirq 3469 0 uio 8703 1 uio_pdrv_genirq fixed 2876 0 sch_fq_codel 9662 2 ipv6 384101 18
STEP 3:
check camera device there or not by using below command
ls /dev/video0
root@raspberrypi0-rdk-camera:~# ls /dev/video0 /dev/video0
On VLC player, for RTSP streaming
need to enter media → Open Network Stream option and then give rtsp URL to play streaming content in VLC
Example :rtsp://192.168.43.146:5544/stream2
We can able to see the live streaming content on VLC Player.
Note: VLC player available PC and RPI target should run in same network.
Enter into AWS account and select the corresponding video stream service which was we created for streaming.
Press "Media Playback" option on the video stream player.
Streaming video content should decode properly on AWS.