Software Requirements (Reference setup)

Installation of dependencies

1. Install Java JDK

Java JDK version should be 1.8+ for now [Note that it must be 1.8.x for now]. Get the supported version from Oracle or use the OpenJDK packages.

Steps to install Open JDK

• sudo apt-get update

• sudo apt-get install openjdk-8-jdk

Check your installation using the command : java  -version

2. Install Maven (Version 3.6.0)

Maven version should be 3 +. 

To install maven follow these steps:

• sudo apt update

• sudo apt install maven

• Check the installation using : mvn -version

3. Download xconf server code

We can download the latest xconfserver code from https://github.com/rdkcentral/xconfserver. The latest version of the code is available in main branch.

• Create a folder : mkdir xconf

• Step into the folder cd xconf/

• git clone https://github.com/rdkcentral/xconfserver.git -b main

4. Install and setup Cassandra(Version 3.11.9)

Install Cassandra

To install Cassandra , follow the below steps

• Download the tarball file for the version 3.11.9 : 

  wget -c https://archive.apache.org/dist/cassandra/3.11.9/apache-cassandra-3.11.9-bin.tar.gz  
  

• Unpack the tarball :  
  tar -xvf  apache-cassandra-3.11.9-bin.tar.gz
  
  

• Step into apache-cassandra-3.11.9 folder :

  cd apache-cassandra-3.11.9
  
  

• To start Cassandra, run the following command

  sudo bin/cassandra
  
  

• To verify that Cassandra is up and running, enter the following command :

  bin/nodetool status

Configure Cassandra

Note :  For the next step, make sure that python is installed. Because cqlsh is python based command line tool. If python is not installed , use this command : sudo apt install python2.7

• schema.cql file is available in 'xconf-angular-admin/src/test/resources/schema.cql'. We can use this cql file to create a corresponding schema . Open another terminal , step into apache-cassandra-3.11.9 folder and  run the following command

          bin/cqlsh -f  { path-to-the-schem.cql file}

         eg : bin/cqlsh  -f ~/xconf/xconfserver/xconf-angular-admin/src/test/resources/schema.cql

• To check if tables are created successfully, we can use cqlsh 
• To start cqlsh, step into cassandra folder and enter the command:
  

   bin/cqlsh 

• It gives cassandra cqlsh prompt as output. To check if all the tables are present enter the following commands in cqlsh prompt :

          USE "demo"; 

          DESCRIBE KEYSPACE;

• To exit from cqlsh prompt, we can use the command : quit

Configuration and Service startup

1. Start Cassandra Service

• To start an Xconf application, start the Cassandra server by executing the following commands:  
  

          cd apache-cassandra-3.11.9
          sudo bin/cassandra

• Status of xconf server can be verified by using  the command

          bin/nodetool status

2. Configure and Start Application Services

a. Build Project

• Go to the xconf-server folder and run the following command to download all dependencies.

          cd ~/xconf/xconfserver

• Run the following command from the xconfserver folder 

          mvn clean install

b. Configure Angular Admin UI

• For first time application deployment, create a "service.properties"  file under the path xconfserver/xconf-angular-admin/src/main/resources/service.properties with the following contents. The sample service.properties file will be available in xconf-angular-admin/src/test/resources/service.properties, the below content is taken from there and modified with change in cassandra port.

• Go to xconf-angular-admin folder

         cd ~/xconf/xconfserver/xconf-angular-admin

• Run the following command from xconf-angular-admin folder
  

      mvn jetty:run -DappConfig=${path-to-service-properties} -f pom.xml

• For first time run only, we need to specify the path to service.properties . For the subsequent runs execute the below command in the folder xconfserver/xconf-angular-admin:          mvn jetty:run

To run the admin UI launch it as http://<XCONF-SERVER-IP>:19093/admin/  in any browser. This will redirect to the login page.

If the user wants both read and write permissions ,then enter username and password for the login are admin and admin respectively

If the user wants only read permissions ,then enter username and password for the login are user and user respectively.

c. Configure DataService

• For first time application deployment, create a "service.properties"  file under the path xconfserver/xconf-dataservice/src/main/resources/service.properties with the following contents. The sample service.properties file will be available in xconf-dataservice/src/test/resources/service.properties, the below content is taken from there and modified with change in cassandra port.
  

  cassandra.keyspaceName=demo cassandra.contactPoints=127.0.0.1 cassandra.username= cassandra.password= cassandra.port=9042 cassandra.authKey= dataaccess.cache.tickDuration=60000 dataaccess.cache.retryCountUntilFullRefresh=10 dataaccess.cache.changedKeysTimeWindowSize=900000 dataaccess.cache.reloadCacheEntries=false dataaccess.cache.reloadCacheEntriesTimeout=1 dataaccess.cache.reloadCacheEntriesTimeUnit=DAYS dataaccess.cache.numberOfEntriesToProcessSequentially=10000 dataaccess.cache.keysetChunkSizeForMassCacheLoad=500 dataaccess.cache.changedKeysCfName=XconfChangedKeys4

• Step into xconf-dataservice folder
   

      cd ~xconf/xconfserver/xconf-dataservice

• Run the following command from xconf-angular-admin folder
  

      mvn jetty:run -DappConfig=${path-to-service-properties} -f pom.xml
  
  

• For first time run only, we need to specify the path to service.properties . For the subsequent runs execute the below command in the folder xconfserver/xconf-dataservice:

         mvn jetty:run      
  

To launch the application go to http://<XCONF-SERVER-IP>:19092/queries/environments .  To verify, add an entry in the environments tab of the xconf admin application and check whether the same is updated here in data service.

NOTE: To run the Admin UI and data service applications in background start jetty server as follows:

nohup mvn jetty:run &

Configuration and Validation of Admin UI 

Admin UI Common Configuration

Below steps will affect all the features in xconf system and should be configured after initial setup. Go to the steps given in site navigation step and press on create button to create new entries.

Define Environments

Site Navigation: <xconf-server>:19093 >> Common >> Environments | Example URL: http://54.245.24.152:19093/admin/ux/#/environment/all

Define Models

Site Navigation: http://<XCONF-SERVER>:19093 >> Common >> Models | Example URL : http://http://54.245.24.152:19093/admin/ux/#/model/all

Define MAC List (This will be used to target certain list of MACs against a particular feature configuration)

Site Navigation http://<XCONF-SERVER>:19093 >> Common >> MAC List | Example URL : http://54.245.24.152:19093//admin/ux/#/namespacedlist/MAC_LIST

 

Define IP list

Site Navigation http://<XCONF-SERVER>:19093 >> Common >> IP List | Example URL : http://54.245.24.152:19093/admin/ux/#/namespacedlist/IP_LIST?pageNumber=1&pageSize=50