Introduction

The Reference Design Kit (RDK) was designed to facilitate the launch of next-generation video and broadband services. It is an open-source software distribution with pre-integrated components that provide a standard architecture for powering CPE from communications service providers, such as set-top boxes, modem/routers, and other devices.
With the evolution of technology, the RDK community has emerged at the forefront of creating universal, differentiated, and customized use cases across industries. The RDK-Camera reference design one such instance, and is easy to use, affordable, and adaptable for developing and constructing cutting-edge smart cameras.
RDK-C provides a common set of software components to build IP-based video cameras with standard functions, such as live streaming and continuous recording. RDK accelerates the deployment of next-gen IP camera products and services, while simplifying the customization of the application and user experience.

Supported Features

RMS (RDK Media Streamer)
- RDK Media Stream is an media server capable of delivering your live and on-‐demand content to any screen
- RMS is not just a multi-‐format, multi-‐protocol server that delivers your media rich content across multiple screens and platforms.
- Capable of ingesting a single live H.264 video stream from either an MPEG-‐TS, RTMP, or RTP encoder and concurrently transforming and redistributing the stream to any other endpoint including PCs, Macs, mobile phones, tablets, and televisions.
- RMS uses WebRTC streaming protocol for end to end streaming

Mediastreamer
- The media streamer does the streaming of captured media content from the camera.
- HTTP streaming through Mongoose server
- The gstreamer media framework is used to stream H264 encoded content to mongoose server
- The output of media streamer shall be provided as input to RDK Mediastreamer (RMS) or for Continuous video recording (CVR) modules

CVR(Continuous Video Recording )
- CVR support using Kinesis Video Streams Producer libraries Kinesis video stream - A set of easy-to-use software and libraries that you can install and configure on your devices
- These libraries make it easy to securely connect and reliably stream video in different ways, including in real time, after buffering it for a few seconds, or as after-the-fact media uploads

Pipewire
- It have ability to create audio and video server
- Apps and device are represented by node
- Each node have the input and output port to share media between node
- Session manager is to configure nodes, ports and linking nodes

KVS SDK
- The Amazon Kinesis Video Streams Producer libraries are a set of easy-to-use libraries that are part of the Kinesis Video Streams Producer SDK. The client uses the libraries and SDK to build the on-device application for securely connecting to Kinesis Video Streams and streaming video and other media data that can be viewed in the console or client applications in real time.
- Media data can be streamed in the following ways:
- Streaming media data in real time
- Streaming media data after buffering it for a few seconds
- Streaming after-the-fact media uploads
- After you create a Kinesis Video Streams stream, you can start sending data to the stream. You can use the SDK to create application code that extracts the video data (frames) from the media source and uploads it to Kinesis Video Streams. These applications are also referred to as producer applications.
Thumbnail
- The RDK-C Thumbnail provides Real time thumbnail and thumbnail on motion events.Types of Thumbnail
  - Next-Gen Thumbnail
  - Smart Thumbnail
HttpClients
- The RDK-C httpclients component provides APIs for REST Operation.
ConfigMgr
- The ConfigMgr provides APIs for the devices and user specific management services.
Plugins
- The RDK-C plugins components provides HAL, APIs to connect with audio and video source streams.