RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Released Automatics System Related Test Cases
Features Covered
SI NO | Automation ID | Steps | Summary | Release |
---|---|---|---|---|
1 | TC-RDKB-RFC-1001 | 2 | Verify configurable RFC check-in trigger using tr181 parameter | Release 2 |
2 | TC-RDKB-PARODUS-1005 | 9 | Verify parodus and webpa uptimes in bootup sequence | Release 2 |
3 | TC-RDKB-WH-SNMP-1000 | 12 | Verify get SNMP for warehouse OIDs | Release 3 |
4 | TC-RDKB-NW-CONNECTIVITY-1010 | 17 | Verify whether the invalid ping servers and valid ping servers are set by SNMP and failure messages are logged when the ping fails in selfHeal log | Release 3 |
5 | TC-RDKB-PARODUS-1006 | 19 | Verify themis curl to acquire JWT for parodus | Release 3 |
6 | TC-RDKB-PARODUS-1008 | 12 | Verify Integrate parodus2ccsp with Yocto | Release 3 |
7 | TC-RDKB-PARODUS-1007 | 18 | Verify Integrate parodus2ccsp with Yocto | Release 3 |
8 | TC-RDKB-PARODUS-1009 | 10 | Test to verify configurable parodus reboot reason | Release 3 |
9 | TC-RDKB-PARODUS-ENBL-1004 | 8 | Verify Webpa commands when Parodus is Enabled | Release 3 |
10 | TC-RDKB-PARODUS-NOPOLL-1001 | 8 | Test to verify parodus nopoll | Release 3 |
11 | TC-RDKB-SYSTEM-1021 | 5 | Test to verify removal of telnet daemon | Release 3 |
12 | TC-RDKB-SYSTEM-5002 | 7 | Verify logging for Harvester and LMLite reports | Release 3 |
13 | TC-RDKB-SYSTEM-5007 | 3 | Verify Xconf default value,Hardware version,Linux kernel upgrade version from logs | Release 3 |
14 | TC-RDKB-REBOOT-5001 | 6 | Test case to verify the docsdevresetnow mib functionality | Release 3 |
15 | TC-RDKB-FS-LAYOUT-1001 | 2 | nvram file system layout validation | Release 3 |
16 | TC-RDKB-FS-LAYOUT-1002 | 2 | nvram2 file system layout validation | Release 3 |
17 | TC-RDKB-FS-LAYOUT-1003 | 3 | tmp file system layout validation | Release 3 |
18 | TC-RDKB-FS-LAYOUT-1004 | 3 | minidumps file system layout validation | Release 3 |
19 | TC-RDKB-FS-LAYOUT-1005 | 2 | rdklogs file system layout validation | Release 3 |
20 | TC-RDKB-FS-LAYOUT-1006 | 3 | cron and etc file system layout validation | Release 3 |
21 | TC-RDKB-FS-LAYOUT-1007 | 2 | dhcp_static_hosts file system layout validation | Release 3 |
22 | TC-RDKB-FS-LAYOUT-1008 | 2 | xupnp file system layout validation | Release 3 |
23 | TC-RDKB-FS-LAYOUT-1009 | 2 | Dibbler file system layout validation | Release 3 |
24 | TC-RDKB-PARODUS-1001 | 3 | Removal of parodus start shell script changes from yocto | Release 3 |
25 | TC-RDKB-SYSTEM-1031 | 10 | Verify no zombie dnsmasq process detected by self heal | Release 3 |
26 | TC-RDKB-SYSTEM-5502 | 2 | Verify the data only partition /nvram is mounted as non-executable | Release 3 |
27 | TC-RDKB-SYSTEM-5503 | 2 | Verify the data only partition /nvram2 is mounted as non-executable | Release 3 |
28 | TC-RDKB-SYSTEM-1101 | 1 | Verify DBus - Overly permissive system setting | Release 3 |
29 | TC-RDKB-CPU_AND_MEMORY-1001 | 1 | Capture CPU and Memory usage individually per process based on request | Release 4 |
30 | TC-RDKB-SYSTEM-7020 | 4 | Verify disk usage, up-time, top, date and disk space response from Arm Console | Release 4 |
31 | TC-RDKB-LIGHTTPD-1002 | 2 | Verify lighttpd version | Release 4 |
32 | TC-RDKB-WH-SNMP-1003 | 4 | Verify snmp set for warehouse DOCSIS OID | Release 4 |
33 | TC-RDKB-PARODUS-RECON-1001 | 3 | Verify parodus restarted by self heal when killed | Release 4 |
34 | TC-RDKB-SYSTEM-1001 | 5 | dnsmasq version check in RDKB devices | Release 4 |
35 | TC-RDKB-WH-SNMP-1007 | 27 | Warehouse test coverage for Wireless OIDs - Sequence strict | Release 4 |
36 | TC-RDKB-SYSTEM-5001 | 2 | Verify stanTC-RDKB-PARODUS-ENBL-1003dard timestamp format is used in RDKB logging | Release 4 |
37 | TC-RDKB-PARODUS-1010 | 6 | Verify parodus reconnect with jitter algorithm | Release 4 |
38 | TC-RDKB-PARODUS-1011 | 23 | Drop process privileges (RDK-B Platforms) | Release 4 |
39 | TC-RDKB-PARODUS-ENBL-1003 | 17 | Verify Enable Parodus in log messages | Release 4 |
40 | TC-RDKB-SYSTEM-5515 | 8 | Verify the logging of WebPA telemetry data in the Parodus Logs | Release 4 |
41 | TC-RDKB-SYSTEM-3043 | 4 | Verify the stress testing for Encrypted file copying from /nvram/ to /opt/secure/ | Release 4 |
42 | TC-RDKB-SYSTEM-3048 | 12 | Test case to verify whether DNS queries follow strict ordering or not | Release 4 |
43 | TC-RDKB-AGGRESSIVE_SELF_HEAL-1001 | 13 | Verify Aggressive selfheal | Release 4 |
44 | TC-RDKB-REBOOT-1015 | 6 | Test to verify abort reboot after reboot initiates | Release 4 |
45 | TC-RDKB-SYSCFG-1000 | 12 | Read syscfg parameters encrypted DB | Release 4 |
46 | TC-RDKB-PRO-INFO-5001 | 17 | Verify the sensitive keywords are removed from iptables | Release 4 |
47 | TC-RDKB-FACTORYRBT-1002 | 25 | Factory reboot scenario using WebPA | Release 4 |
48 | TC-RDKB-FACTORYRBT-1003 | 25 | Factory reboot scenario using SNMP | Release 4 |
49 | TC-RDKB-SYSTEM-1026 | 12 | Verifiy the minidump generated during process crash is uploaded to S3/crash portal | Release 4 |
50 | TC-RDKB-REBOOT-1011 | 7 | Perform reboot with device component, delay and reboot reason | Release 4 |
51 | TC-RDKB-SYSTEM-5050 | 3 | Verify whether multiple udhcpc.script error messages getting printed in Consolelog.txt | Release 4 |
52 | TC-RDKB-WAREHOUSE-1001 | 10 | Verify warehouse staging using xconf method | Release 4 |
53 | TC-RDKB-WAREHOUSE-1002 | 10 | Verify warehouse staging using webpa method | Release 4 |
54 | TC-RDKB-REBOOT-1014 | 8 | Verify Abort Reboot after successful CDL | Release 4 |
55 | TC-RDKB-PRO-INFO-5002 | 17 | Verify the sensitive keywords are removed from ip6tables | Release 4 |
56 | TC-RDKB-SYSTEM-PING-IPRUT-5001 | 4 | Verify Add IP from ATOM side private network using Ping and ip route | Release 4 |
57 | TC-RDKB-CPUPROC-1000 | 14 | Test to verify CPU Performance Analysis - Process Analyzer | Release 4 |
58 | TC-RDKB-REBOOT-5003 | 8 | Verify interface reboot due to brlan0 and verify logs in SelfHeal.txt.0 file | Release 4 |
59 | TC-RDKB-FACTORYRESET_REBOOT-1001 | 49 | Test to verify default values after factory reset and value persistance after reboot | Release 4 |
60 | TC-RDKB-CCSP-1000 | 6 | Verify service configuration feature is disabled | Release 4 |
61 | TC-RDKB-REBOOT-1013 | 24 | Verify device gives response as invalid request when there is no reboot is pending and abort reboot command is sent | Release 4 |
62 | TC-RDKB-SYSTEM-9010 | 17 | Verify ccsp-webpa-adapter | Release 4 |
63 | TC-RDKB-SYSTEM-3042 | 21 | Verify that /opt/secure folder is encrypted | Release 4 |
64 | TC-RDKB-CPU_AND_MEMORY-1002 | 6 | Capture CPU and Memory usage individually per process based on request | Release 4 |
65 | TC-RDKB-SYSTEM-1028 | 5 | Test to verify CPU usage | Release 4 |
66 | TC-RDKB-SYSTEM-5003 | 7 | Verify Webpa Notifications on Firmware Upgrade | Release 5 |
67 | TC-RDKB-SYSTEM-DIBBLER-1001 | 2 | To check the dibbler version | Release 5 |
68 | TC-RDKB-FS-LAYOUT-1010 | 3 | Test to verify resolv.conf file system layout validation and DNS value | Release 5 |
69 | TC-RDKB-FACTORYRBT-1006 | 9 | Test to verify Default SSID and Password after Factory Resetting Router through WebPA | Release 5 |
70 | TC-RDKB-FACTORYRBT-1007 | 6 | Verify Default SSID and Password after Factory Resetting WiFi through WebPA object | Release 5 |
71 | TC-RDKB-REBOOT-1012 | 12 | Verify device provides notification via WebPA to indicate that reboot is about to occur after firmware upgrade and adds delay to the reboot | Release 5 |
72 | TC-RDKB-SYSTEM-IPSET-1008 | 17 | Verify upgrade ipset to v.6.34 | Release 5 |
73 | TC-RDKB-EXEC-FILE-CHK-1001 | 10 | Verify whether user is able to run user or manual script even after giving 777 permission | Release 5 |
74 | TC-RDKB-AUTOREBOOT-1000 | 12 | Test to verify the default parameter values of Auto reboot | Release 5 |
75 | TC-RDKB-REBOOT-5005 | 8 | Test to Verify RDKB devices patches kernel - after reboot | Release 5 |
76 | TC-RDKB-THERMAL_FAN-1000 | 11 | Device shall have the ability to retrieve the fan diagnostics via WebPA | Release 5 |
77 | TC-RDKB-WIFI-5021 | 8 | Test to verify number of allowed clients for Public Secure and open SSID can be writable using WebPA/TR69 and changes are logged in WebPA/TR69 log file | Release 5 |
78 | TC-RDKB-BUSYBOX-UTILITY-1001 | 7 | Validate Busybox utility tar | Release 5 |
79 | TC-RDKB-NMI_REBOOT-1001 | 16 | Verify NMI mtdoops& SRAM support for BCM ARM processors to capture system state during watchdog reset | Release 5 |
80 | TC-RDKB-BUSYBOX_UTILITY-1003 | 6 | Verify the installed busy box utilities on CM side | Release 5 |
81 | TC-RDKB-RM-MODULE-1002 | 19 | Verify removal of SoundKernel, mtp-tools, libsven | Release 6 |
82 | TC-RDKB-RM-MODULE-1001 | 10 | Verify removal of SoundKernel, mtp-tools, libsven | Release 6 |
83 | TC-RDKB-SYSTEM-1023 | 5 | Test to verify ssh banners from sshbanner.txt file and command execution | Release 6 |
84 | TC-RDKB-REVSSH-1001 | 9 | Verify Reverse SSH connection | Release 6 |
85 | TC-RDKB-GBPAD-1001 | 5 | Test to Verify mini dump creation and upload to crash portal for the process PandM | Release 7 |
86 | TC-RDKB-GBPAD-1005 | 5 | Test to Verify mini dump creation and upload to crash portal for the process CcspPsm | Release 7 |
87 | TC-RDKB-GBPAD-1007 | 5 | Test to Verify mini dump creation and upload to crash portal for the process webpa | Release 7 |
88 | TC-RDKB-GBPAD-1008 | 5 | Test to Verify mini dump creation and upload to crash portal for the process CcspWifiAgent | Release 7 |
89 | TC-RDKB-GBPAD-1011 | 5 | Test to Verify mini dump creation and upload to crash portal for the process meshAgent | Release 7 |
90 | TC-RDKB-GBPAD-1012 | 5 | Test to Verify mini dump creation and upload to crash portal for the process parodus | Release 7 |
91 | TC-RDKB-GBPAD-1006 | 5 | Test to Verify mini dump creation and upload to crash portal for the process CcspCr | Release 8 |
92 | TC-RDKB-REBOOT-5002 | 1 | Verify BootTime using TR-181 Parameter(Device.DeviceInfo.X_RDKCENTRAL-COM_BootTime) | Release 8 |
93 | TC-RDKB-GBPAD-1014 | 5 | Test to Verify mini dump creation and upload to crash portal for the process CcspHotspot | Release 8 |
94 | TC-RDKB-GBPAD-1015 | 5 | Test to Verify mini dump creation and upload to crash portal for the process SNMP_SUBAGENT | Release 8 |
95 | TC-RDKB-GBPAD-1004 | 5 | Test to Verify mini dump creation and upload to crash portal for the process CcspTr069 | Release 8 |
96 | TC-RDKB-SYSTEM-9008 | 2 | Validate if RDKB SSH client is not accessible via WAN | Release 8 |
97 | TC-RDKB-SYSTEM-1102 | 7 | Test case is created as to Enable Disable Feature Via DCM | Release 8 |
98 | TC-RDKB-WIFI-FIRM-DWNL-5001 | 25 | Verify the Time frame validation for DUT online | Release 9 |
99 | TC-RDKB-SYSTEM-5400 | 4 | Verify Mount options for tmp directory | Release 9 |
100 | TC-RDKB-SYSTEM-1029 | 2 | Verify accessibilty for ARM to Atom SSH | Release 9 |
101 | TC-RDKB-RBUS-1001 | 8 | Validate device status when rbus is enabled | Release 9 |
102 | TC-RDKB-WH-FR-RS-5001 | 19 | Improved testing sequences for RDK-B WIFI warehouse | Release 9 |
103 | TC-RDKB-SUBMSK-CHANGE-5001 | 2 | Verify subnet mask range in router mode | Release 9 |
104 | TC-RDKB-SYSCFG-1001 | 12 | Verify syscfg parameters after removing unencrypted /nvram/syscfg.db | Release 9 |
105 | TC-RDKB-PARODUS-1012 | 11 | Verify themis token fetch by passing Partner-ID as a request header | Release 10 |
106 | TC-RDKB-ACS-PERSIST-MESH-1001 | 23 | Verify Private WiFi channel selection (ACS) should remain same post MESH enabled or disabled | Release 10 |
107 | TC-RDKB-BINARIES-1004 | 7 | Test to verify Removed Or Encrypted Private Keys | Release 10 |
108 | TC-RDKB-SWAP-5001 | 10 | Verify the swap memory can be enabled and disabled using ZRAM | Release 11 |
109 | TC-RDKB-BOOTSTRAP-1031 | 48 | Test to verify bootstrap configuration with version and update source | Release 11 |
110 | TC-RDKB-RFC-1202 | 12 | Test to Verify that RFC requests contain accountId Unknown on Every powercycle | Release 11 |
111 | TC-RDKB-BOOTSTRAP-1030 | 48 | Test to verify bootstrap configuration and version | Release 11 |
112 | TC-RDKB-SYSTEM-1033 | 10 | Test to verify reporting of RFC feature enable | Release 12 |
113 | TC-RDKB-WIFI-REBOOT-1001 | 5 | Verification of any kind of crash in device if Multiple WiFi reset triggerred | Release 12 |
114 | TC-RDKB-RFC-1006 | 10 | Verify Reboot required RFC change causes scheduled reboot in maintenance window | Release 12 |
115 | TC-RDKB-RFC-1005 | 11 | To verify RFC versioning support | Release 12 |
116 | TC-RDKB-RFC-SNMP-1001 | 7 | Verify RFC control of SNMPv2 | Release 12 |
117 | TC-RDKB-DEVICE-RESET-1005 | 35 | Perform Factory reset from Admin GUI page and verify default values after factory reset | Release 12 |
118 | TC-RDKB-RFC-DATABASE-1001 | 15 | Validate RFC default and enabled values in defaults/database file | Release 12 |
119 | TC-RDKB-RFC-1003 | 12 | Verify RFC processing log messages present in dcmrfc.log for posted parameter value | Release 12 |
120 | TC-RDKB-RFC-1201 | 9 | Test to Verify that xconf requests contain accountId | Release 12 |
121 | TC-RDKB-RFC-1200 | 25 | Test to Verify that xconf requests contain accountId | Release 12 |
122 | TC-RDKB-DEFAULT-VALUES-1001 | 97 | Verify the default values in the device after factory resetting by WebPA | Release 12 |
123 | TC-RDKB-RFC_FEATUREINSTANCE-1001 | 9 | Verify RFC reports feature instance | Release 13 |
124 | TC-RDKB-BOOTSTRAP-1029 | 193 | Verify bootstrap configuration | Release 13 |
125 | TC-RDKB-RFC-MTLS-1001 | 16 | Test case to verify mutual TLS feature for log upload. | Release 19 |
126 | TC-RDKB-NTP-1004 | 17 | Verify Single build should include all the NTP FQDNs for the device. | Release 19 |
127 | TC-RDKB-SYNDICATION-WAN-SSH-1001 | 11 | To verify WAN-side SSH support in single build | Release 19 |
128 | TC-RDKB-DHCP-IPV6-1001 | 8 | Verify DHCPv6 address in Ethernet connected client on changing Min Address and Max Address | Release 19 |