RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
The Audio Response characteristic is used to allow the RVS Client to provide a reason to the RVS Server for not initiating a voice session.
The Audio Response characteristic is optional.
The characteristic UUID shall be set to **.
The Audio Response can have the values shown in Table below.
Session Response Enum | Value | Description |
---|---|---|
Busy | 0x1 | The device is performing other tasks that prevent it from beginning a voice session. An example of this could be another voice session from a different device is in progress already or a captive firmware update is in progress. |
Voice Server Not Ready | 0x2 | An associated endpoint to send voice data to is not available for a voice session. |
Not Supported | 0x3 | Device does not support voice control. |
Failure | 0x4 | An unspecified failure has occurred on the device preventing it from beginning a voice session. |
Reserved | 0x5-0xFF | Reserved for future use. |
If the RVS Server supports the Audio Response characteristic, the RVS Client MAY write the Audio Response Characteristic if it is unable to accept notifies on the Audio Data characteristic.