You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »


RDK Reference Platform Release - 2020 M2

Version: 1.0
28th February 2020


RDK MANAGEMENT, LLC CONFIDENTIAL AND PROPRIETARY
This file (and its contents) are the intellectual property of RDK Management, LLC.
It may not be used, copied, distributed or otherwise disclosed in whole or in part without the express written permission of RDK Management, LLC. Copyright (c) 2020 RDK Management, LLC. All rights reserved.


Contents


Introduction


This Release Notes document details on the delivery version 2020 M1 for the RDK Reference Platform to the RDK Community

  1. Release Feature Information
  2. Software and Hardware requirements to build
  3. Known limitations
  4. Updated Platform Tickets

Release Information


Below are the list of release features supporting R-Pi platform and Emulator.


S.NoFeatureDeviceProfileRemarksTickets
1Community, TDK TicketsRPI and EmulatorBroadband

2Add IO connector plugin to RPI thunder imagesRPIVideo
  • Integration of IO connector plugin to RPI thunder images
REFPLTV-393
3Integration of Firmware Control Plugin for RPIRPIVideo
  • Provided support for firmware upgrade with dual bank
TS-27
4Super POD connectivity to Plume cloud server through Turris Omnia  RDKB  GatewayTurris OmniaBroadband/Extender

  • SuperPOD (plume) connection establishment on Turris omnia Gateway to have connectivity to Plume Cloud server.

    It is for showing statistics in Plume NOC and for validating the completeness of opensync integration on gateway side.
  • In order to connect to Plume cloud server, backhaul connection has to be established from Super POD to Turris Omnia Gateway.

  • SuperPOD should be connected to Plume cloud server through RDKB Gateway. Then SuperPOD will be shown as online node in Plume NOC.

  • Wifi Extender functionality achieved with Super POD through Turris Omnia Gateway
REFPLTB-434
5IPv6 supportTurris OmniaBroadband/Extender
  • Ipv6 address family support for Turris omnia target
  • Dibbler server running in turris omnia gateway giving out Ipv6 address lease to connected clients
  • Invoke dibbler client for uplink interface to get Ipv6 address lease from server running in uplink network
REFPLTB-521
6Hostapd dynamic ConfigurationTurris OmniaBroadband/Extender
  • Updating the configuration settings of hostapd daemon process dynamically without restarting the service 
  • Setting the SSID of hostapd of 2GHz radio through dmcli command
  • Setting the Passphrase  of hostapd of 2GHz radio through dmcli command
REFPLTB-539

Hardware and Software Requirements

Supported software and hardware

  • Preferred 2.4GHZ WIFI adapter for Emulator: Tenda 150Mbps Wireless PICO USB Adapter with RT5370 chipset (W311MI) (or)
    Preferred 2.4GHZ WIFI adapter for Emulator:  TP-Link AC1200 Wireless Dual Band USB Adapter (Archer T4U)
  • Preferred 5GHZ WIFI adapter for Emulator/RPI:  TP-Link AC1200 Wireless Dual Band USB Adapter (Archer T4U)
  • Preferred xfinity-wifi 2.4GHZ WIFI adapter for RPI:  TP-LINK TL-WN823N 300Mbps Mini Wireless N USB Adapter
  • New dongle - Ultra-fast 1300 (867+400) mbps wireless speed with 802.11ac
  • USB to Ethernet
  • Desktop PCs
  • 8 GB SD-Card

Known Issues and Limitations

  • Nil

Project Documentation

Below are the list of supporting documents that are part of release


1Release NotesRelease Notes -This document
2Requirement Traceability Table
This document tracks the requirement/feature from end to end (For Eg: from design,coding,testing,documentation are tracked for an particular feature. This enables the user to have a quick references of a particular feature


Technical Support contact


  • No labels

DISCLAIMER: Please note that the use of the RDK Wiki is subject to its Privacy Policy & Terms of Use. In addition, this Wiki may be accessed by all RDK licensees and their contractors.