RDK Resources
[*RDK Preferred*]
Code Management Facility
RDK Forums
[RDK Conferences]
RDK Support
Archives
Papers & Presentations Archive
Port triggering is a network management strategy characterised by dynamic facilitation, opening, and forwarding of specific inbound ports based on discerned patterns in outbound traffic. This adaptive approach optimises network efficiency by selectively permitting inbound data in response to recognised internal network activities.
https://code.rdkcentral.com/r/q/topic:Port_triggering_patches
RPI4 32bit |
---|
|
Reference link: RPI 4B Model Reference Platform
Reference link: RPI 4B Model Reference Platform with 64bit Arch
RPI4 64bit |
---|
mkdir <workspace dir > cd <workspace dir > repo init -u https: //code .rdkcentral.com /r/manifests -b kirkstone -m rdkb-extsrc.xml repo sync -j`nproc` --no-clone-bundle MACHINE=raspberrypi4-rdk-broadband source meta-cmf-raspberrypi /setup-environment //For 32 Bit Image MACHINE=raspberrypi4-64-rdk-broadband source meta-cmf-raspberrypi /setup-environment //For 64 Bit Image bitbake rdk-generic-broadband-image |
Reference link: RPI 4B Model Reference Platform 32bit
Reference link: RPI 4B Reference Platform 64bit
TCP |
---|
1)In Your client machine(LAN)you have to run FTP server 2)In router configure Trigger port 443:443 and Target port 21:21(can be also added from webui). 3)External network(WAN) try to access ftp server of client machine using router uplink ip address(Goto terminal enter ftp -p 192.168.2.30) ftp port 21 will not start util you trigger any packet flow on port 443 in your client machine 4)In your client machine(LAN)run https service(In browser https://www.google.com) 5)Goto to your external network(WAN),try access ftp server of client machine(ftp -p 192.168.2.30).incoming traffic on ports 21 after seeing an outgoing packet on port 443 |
UDP |
1)In router configure Trigger port 443:443 and Target port 2399:2399(can be also added from webui). 2)In Your client machine(LAN)you have to run : nc -u -l 2399 3)From external WAN machine run nc -u 192.168.2.30 2399 (192.168.2.30 - router uplink ip address) 4)In your client machine(LAN)run https service(In browser https://www.google.com) 5)Goto to your external network(WAN), access server of client machine(ftp -p 192.168.2.30). Able to see incoming traffic on ports 2399 after seeing an outgoing packet on port 443 |
RaspberryPi
REFPLTB-2851 - Getting issue details... STATUS |
---|
REFPLTB-1735 - Getting issue details... STATUS |